Home Shed 10×12 Hip Roof Construction Plans

10×12 Hip Roof Construction Plans

by Ovidiu

 

This step by step diy project is about 10×12 hip roof shed plans. This is PART 2 of the shed project where I show you how to build the roof structure for the 10×12 hip shed. I show you all you need to know about framing a beautiful hip roof. The rafters are 16″ on center and made from 2x6s. Make sure you read the local codes so you can comply with the legal requirements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

10×12 Hip Roof Construction Plans

Building-a-10x12-hip-roof-shed

Building-a-10×12-hip-roof-shed

 

Cut & Shopping Lists

  • J – 2 pieces of 2×4 lumber – 40″ long, 1 piece of 2×6 lumber – 25 1/2″ long RIDGE BEAM
  • K – 4 pieces of 2×6 lumber – 110 1/2″ long HIP RAFTERS
  • K – 6 pieces of 2×6 lumber – 86 1/2″ long COMMON RAFTERS
  • L – 4 pieces of 2×6 lumber – 29 1/2″ long, 4 pieces – 67 3/4″ long, 4 pieces – 48 3/4″ long, 4 pieces – 30 3/4″ long, 4 pieces – 50″ long, 4 pieces – 69″ long JACK RAFTERS
  • M – 4 pieces of 3/4″ plywood – 48″x70″ long, 4 pieces – 35″x59 1/2″ long, 2 pieces – 48″x71″ long, 2 pieces – 48″x92 3/4″ long, 2 pieces – 83 1/2″x35 1/4″ long ROOF SHEETS
  • N – 280 sq ft of tar paper, 280 sq ft of asphalt shingles ROOFING
  • O – 2 pieces of 1×8 lumber – 141 1/4″ long, 2 pieces – 163 3/4″ long TRIMS
  • P – 8 pieces of 1×4 lumber – 96″ long, 2 pieces – 43″ long, 2 pieces – 36″ long TRIMS
  • R – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 55″ long JAMBS
  • S – 1 piece of T1-11 siding – 48″x80″ long, 2 pieces of 2×4 lumber – 48″ long, 2 pieces – 73″ long, 1 piece – 41″ long DOOR

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

  • PART 1: 10×16 Shed with a Hip Roof Plans
  • PART 2: 10×16 Hip Roof Shed Plans

 

 

It’s that simple to build a shed with a hip roof – Video!

 

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

10×16 Shed Hip Roof Plans

Fitting the ridge beam

Fitting the ridge beam

The first step of the project is to install the ridge beam for the hip roof. Therefore, use 2×4 lumber for the supports and drill pocket holes at both ends. Use 2×6 lumber for the ridge beams. Center the supports to the plates and insert 2 1/2″ screws to lock everything together tightly. Plumb the supports and make sure the corners are square.

Building-the-hip-rafters

Building-the-hip-rafters

Use a miter saw to make 25 degree cuts to both ends of the boards. These are the hip rafters. Smooth the edges with sandpaper. Make sure you do a compound cut to the top end of the hip rafters (48 degrees bevel, 25 degrees miter).

Fitting the hip rafters - 10x12 shed

Fitting the hip rafters – 10×12 shed

Fit the hip rafters to the storage shed. Align the edges with attention, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly. Use rafter ties to reinforce the joints.

Building the common rafters - 10x16 shed

Building the common rafters – 10×16 shed

Use 2×6 lumber for the common rafters. Use a miter saw to make the 33.5 degree angle cuts to both ends of the rafters, as shown in the diagram.

Fitting the common rafters to the hip roof

Fitting the common rafters to the hip roof

Fit the common rafters to the top of the 10×12 hip roof  shed. Align the edges, drill pilot holes and insert screws to lock them into place tightly. Fit the rafters as shown in the plans. Use rafter ties to secure the rafters to the top plates and screws to secure them to the ridge beam.

Jack-rafters-side-of-the-shed

Jack-rafters-side-of-the-shed

Next, build the jack rafters for the hip roof of the shed. Use a miter saw and make a simple 33.5 degree miter cut at one end. Use the miter and make a compound cut for the opposite end: 33.5 miter cut and 50 degree bevel cut.

Side jack rafters

Side jack rafters

Fit the jack rafters to the top of the shed. Start installing the jack rafters from the common rafters toward outside, every 16″ on center. Use rafter ties to the secure the rafters into place tightly. Drill pilot holes and insert screws.

Front-and-back-jack-rafters

Front-and-back-jack-rafters

Make the jack rafters for the front and back of the roof.

Front and back jack rafters

Front and back jack rafters

Fit the rafters to the hip rafters, as shown in the diagram. Place the rafters every 16″ on center, as shown in the plans.

Side roof sheets

Side roof sheets

Use 1/2″ plywood for the roof sheets. Cut the sheets at the right dimensions and then lay them to the top of the roof structure. Align the edges flush, leave no gaps between the sheets and insert 1 5/8″ screws, every 8″ along the framing.

Side roof sheets - hip roof shed

Side roof sheets – hip roof shed

Fit the sheets to the sides of the roof. Leave no gaps between the sheets and align the edges flush.

Fitting the roof trims - hip roof shed

Fitting the roof trims – hip roof shed

Use 1×8 lumber for the roof trims. Cut the trims at the right dimensions and secure them to the end of the rafters. Drill pilot holes and insert 2 1/2″ screws to lock the trims into place tightly.

Fitting the roofing - 10x12 hip roof shed

Fitting the roofing – 10×12 hip roof shed

Install the roofing felt, starting from the bottom left of the roof. Secure the paper to the roofing, using a stapler. Make sure the tar paper overlaps at least 2”. Don’t forget to cover the top ridge with a 14” strip of paper .

Start the first course of shingles with a full tab, the second with 2 1/2 tabs, the third with 2 tabs, the forth with 1 1/2 tabs, the fifth with 1 tab, the sixth with half tab and the seventh with a 3 tabs.

Side window trims - hip roof shed

Side window trims – hip roof shed

Install the window to the side of the shed and then fit the decorative trims. Insert 2″ nails to secure the trims tightly.

Door jambs - 10x12 shed

Door jambs – 10×12 shed

Use 2×4 lumber for the door jambs. Align the edges flush and insert 2 1/2″ screws to lock them into place tightly.

Front door - 10x12 shed

Front door – 10×12 shed

Use the panel that you have cut out in the previous steps for the door. Use 2×4 lumber for the trims. Assemble the door frame with 2 1/2″ screws and pocket holes. Make sure the corners are square and check if the diagonals are equal. Attach the door panel into place with 2″ nails.

Fitting the door into place - shed

Fitting the door into place – shed

Fit the door to the front of the shed. Align the edges flush and use hinges to lock them secure it to the jambs. Install a latch to keep the door secured.

Fitting the corner trims - 10x12 shed

Fitting the corner trims – 10×12 shed

Fit the 1×4 or 1×3 trims to the corners of the shed. Align the edges flush and insert 2″ nails to secure them into place tightly.

10x12 Hip Roof Shed Plans - Back View

10×12 Hip Roof Shed Plans – Back View

Make sure you check out PART 1 of the 10×12 garden hip roof shed project, so you learn how to build the wall frames and the door.

10x12 Hip Roof Shed Plans

10×12 Hip Roof Shed Plans

This 10×12 shed is beautiful, sturdy and it will help you organize the garden tools and other items you have around the house. You can make a lot of adjustments and customize it to suit your needs. Please take a look over the rest of my woodworking plans, because I have over 1500 free designs.

 

 

This woodworking project was about 10×12 shed with hip roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Cliff Eck -

I am looking for a plan for a 16 x 20 Shed with a hip roof ( 4:12 to 6:12 ). No snow load (Florida). 12″ overhang. One 60″w roll up overhead door. One 30″ exterior door. On skids.

Other options not important

Do you have anything like that?

I’m trying to somewhat match it to the look of my home construction.

Reply
Ovidiu -

I don’t have anything that large with a hip roof.

Reply

Leave a Comment