This step by step diy project is about 10×12 shed door plans. This is PART 3 of the 10×12 flat roof shed project, where I show you how to build the doors for the storage shed and how to fit the trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.
Projects made from these plans
10×12 Flat Roof Shed Door Plans
[tabs tab1=”Materials” tab2=”Tools” tab3=”Time” tab4=”Related Plans”] [tab id=1]
- N – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 43″ long JAMBS
- O – 1 piece of T1-11 siding – 36″x80″ long, 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 73″ long, 1 piece – 29″ long DOOR
- P – 2 pieces of 1×4 lumber – 48″ long, 2 piece – 55″ long, 2 pieces – 95 3/4″ long, 2 pieces – 94 1/2″ long, 4 pieces – 101 1/4″ long TRIMS
- 6 pieces of 2×4 lumber – 8′
- 4 pieces of 1×4 lumber – 8′
- 4 pieces of 1×4 lumber – 10′
- 1 piece of T1-11 siding – 4’x8′
- 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
- 4d nails, 16d nails, 6d nails
- wood filler , wood glue, stain/paint
[/tab] [tab id=2]
[/tab] [tab id=3]
How to build a shed door
Fit the 2×4 jambs around the opening with 6-8d nails. Insert the nails every 8″ along the framing. Align the edges flush.
Build the door panels from T1-11 siding and the trims from 2×4 lumber. Use 2″ screws or nails to lock the panels to the trims. Add glue to the joints and align the edges flush.
Fit the double doors to the opening. Align the edges and then lock the doors to the jambs with hinges. Install a latch to the doors so you can keep them closed properly.
Fit the window to the side wall of the shed. Fit the 1×4 trims to side window. Align the edges with attention and leave no gaps between them. Insert 6d nails to lock the into place tightly.
Fit the 1×4 trims to the sides of the shed. Cut the trims at the right dimensions and angles and then fit them into place tightly. Insert 6d nails every 8″ along the framing to lock the into place tightly.
Attach the 1×4 trims to the front of the shed. Cut the trims at the right dimensions and then lock them into place tightly with 6d nails.
Attach the 1×4 trims to the back of the storage shed.
This 10×12 shed is an amazing addition to your backyard. You will create a lot of extra storage space and you will also have a place for letting your creativity go wild on DIY projects. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.
This woodworking project was about shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.