Simple Playhouse Plans

This step by step diy woodworking project is about simple playhouse plans. If you want to learn more about building a basic playhouse with an appealing design, we recommend you to take a look over the instructions described in the article. Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from.

Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue t the joints, in order to enhance the rigidity of the structure. See all my Premium Plans HERE.

Projects made from these plans

Simple playhouse plans

Building-a-playhouse

Cut & Shopping Lists

• A – 2 pieces of 2×4 lumber – 96″ long, 9 pieces – 45″ long FLOOR
• B – 1 pieces of 3/4″ plywood – 48″x96″ long FLOOR
• C – 2 pieces of 2×2 lumber – 48″ long 3xSTUDS
• D – 2 piece of 2×2 lumber – 27 3/4″ long 3xRAFTERS
• E – 5 pieces of  2×2 lumber – 72″ long FRAME
• F – 2 pieces of 3/4″ plywood – 45 3/4″x72″ long, 2 pieces – 45″x59 1/2″ long WALLS
• G – 8 pieces of 1×3 lumber – 29″ long, 12 pieces – 16″ long, 2 pieces – 23″ long, 4 pieces – 40 1/2″ long, 2 pieces – 30″ long TRIMS

• 7 pieces of 2×4 lumber – 8 ft
• 4 pieces of 3/4″ plywood – 4’x8′
• 7 pieces of 2×2 lumber – 8 ft
• 9 pieces of 1×3 lumber – 8 ft
• 100 pieces of 2 1/2″ screws
• 500 pieces of 1 1/4″ pocket screws
• 2″ brad nails
• wood glue, stain/paint
• wood filler

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Part 1: Simple playhouse plans
• Part 2: Building a playhouse

Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. 

Building a simple playhouse

Building-the-frame-for-floor

First of all, you need to build the frame of the floor. In order to get the job done in a professional manner, we recommend you to build the components out of 2×4 lumber. Cut the components at the right size and drill pilot holes through the side components. Insert 2 1/2″ screws into the regular joists, making sure the corners are right-angled.

Attaching the floor

The next step of the project is to to attach a 3/4″ plywood sheet to the frame floor. Align the edges with great care and smooth the edges with attention. Drill pilot holes through the plywood and insert 1 1/4″ screws into the floor frame.

Building-the-frame

The next step of the project is to build the front and back frames for the playhouse. Cut the components out of 2×2 lumber, using the instructions shown in the diagram. Drill pilot holes and lock the components together using 2 1/2″ screws. Add glue to the joint and remove the excess with a damp cloth.

Building-the-frame-of-playhouse

Lay the frames to the floor of the playhouse and use a spirit level to make sure they are plumb. Drill pilot holes through the bottom plates and insert 2 1/2″ screws into the floor. Drill pocket holes at both ends of the side components and insert 2 1/2″ screws into the front and back faces.

Building the front wall

Build the front panel out of 3/4″ plywood. Make sure you cut out the door opening with a circular saw. Smooth the edges thoroughly and drill pocket holes along the exterior edges. Fit the panel to the frame of the playhouse and secure it into place using 1 1/4″ screws. Leave no gaps between the components and add glue to the joints.

Fitting the side walls

Build the side walls out of 3/4″ plywood. Use a jigsaw to cut out the window opening. Drill pocket holes along the edges of the panel and insert 1 1/4″ screws into the frame of the

Building the back wall

Build the back wall in the same manner described above. Cut out the opening with a jigsaw and smooth the edges. Drill pocket holes around the edges, align the panel with attention and secure it to the frame using 1 1/4″ screws. Add glue to the joints and remove the excess with a damp cloth.

Fitting the door trims

In order to enhance the appearance of the playhouse, we recommend you to attach 1×3 trims around the door. Make the top trim curved and smooth the cut edges with sandpaper. Attach the trims to the wall and secure it into place using glue and finishing nails. Leave no gaps between the components.

Fitting the back face trims

Fit 1×3 trims to the rest of the windows. If you want to add a personal touch to the playhouse, we recommend you to fit trims to both faces of the panels.

Fitting the side trims

Fit the trims around the side windows and secure them into place using finishing nails.

Simple playhouse plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the project and to protect the desk from decay, we recommend you to cover the components with paint or stain. Pay attention to the rest of the project to learn how to build the roof and the front overhang.

This woodworking project was about simple playhouse plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

EXPLORE MORE IDEAS FOR: