This step by step diy woodworking project is about vertical tiered planter plans. This detailed article features instructions and complete diagrams about building a beautiful ladder planter that you can lean to any wall on your property. This project requires basic tools and materials, so that any person with beginner skills can get the job done in less than a week.
Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from. Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting.
Projects made from these plans
Vertical Tiered Planter Ladder Plans
- A – 2 pieces of 2×6 lumber – 72″ long POSTS
- B – 4 pieces of 1×6 lumber – 34 1/2″ long BOTTOM
- C – 8 pieces of 1×8 lumber – 6 3/8″ long SIDES
- D – 8 pieces of 1×6 lumber – 34 1/2″ long FACES
How to build a tiered planter
The first step of the woodworking project is to build the ends of the planters. Mark the cut lines on the slats and get the job done with a circular saw. Smooth the edges and remove the residues.
The next step of the project is to attach the bottom to the sides of the planters. Add glue to the joints, drill pilot holes through the side components and insert 1 1/4″ screws. Align the edges with attention before inserting the screws. Drill several drainage holes through the bottom component.
Build the faces of the planters out of 1×6 lumber. Drill pilot holes through the sides and insert 1 1/4″ screws into the components. Add glue to the joints and leave no gaps between the components.
Build the supports out of a 72″ long 2×6 beam. Cut both ends of the beam at 80 degrees. Afterwards, use a saw to make the cuts to the top of the supports. Smooth the edges with fine-grit sandpaper and remove the residues with a damp cloth.
Start the assembly of the vertical tiered ladder planter. As you can easily notice in the diagram, we recommend you to fit the top planter to the side legs. Align the edges with attention. Drill pilot holes through the side legs and insert 2″ into the planters. Add glue to enhance the bond of the joints.
Fit the rest of the planters, making sure you place them equally-spaced. You can adjust the distance between the planters to suit your needs.
One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
Top Tip: If you want to enhance the look of the project and to protect the wooden garden swing stand from decay, we recommend you to cover the components with paint or stain.
This woodworking project was about vertical tiered ladder planter plans free. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.