Home Garden Tiered Garden Raised Bed Plans

Tiered Garden Raised Bed Plans

by Ovidiu

 

This step by step diy woodworking project is about diy tiered garden raised garden bed plans. The project features instructions for building a small corner planter for your garden. If you want to enhance the look of your backyard, you should consider building a tiered garden bed. Work with attention and make adjustments to the design and overall dimensions if you want to get the job done in a professional manner.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

How to build a tiered raised garden bed

Building-a-tiered-raised-planter

Building-a-tiered-raised-planter

 

Cut & Shopping Lists

  • A – 2 pieces of 2×6 lumber – 30″ long, 2 pieces – 27″ long FIRST PLANTER
  • B – 2 pieces of 2×6 lumber – 30″ long, 2 pieces – 21″ long SECOND PLANTER
  • C – 1 pieces of 2×6 lumber – 21″ long, 1 piece – 22 1/2″ long, 1 piece – 31 3/4″ long THIRD PLANTER
  • D – 1 pieces of 2×6 lumber – 15″ long, 1 piece – 16 1/2″ long, 1 piece – 23 1/4″ long TOP PLANTER
  • E – 2 pieces of 2×2 lumber – 11″ long, 1 piece – 22″ long SUPPORTS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Tiered Garden Raised Bed Plans

Building-the-bottom-planter

Building-the-bottom-planter

The first step of the project is to build the bottom planter. Cut the components from 2×6 lumber and drill pilot holes at both ends of the long slats. Align the edges and make sure the corners are square before inserting the 2 1/2″ screws.

Assembling the second planter

Assembling the second planter

Continue the project by assembling the second planter. Cut the components from 2×6 lumber and drill pilot holes at both ends of the long beams. Insert 2 1/2″ screws and make sure the corners are right-angled. Align the edges with attention.

Fiting the corner supports

Fitting the corner supports

Select the location for the raised garden bed and lay the bottom planter. Fit landscape fabric inside the bottom planter and staple it to the wooden slats. Install the second planter and fit the 2×2 corner supports to lock everything together tightly. Drill pilot holes through the vertical supports and insert 2 1/2″ screws.

Assembling-the-large-triangle-planter

Assembling-the-large-triangle-planter

Continue the project by assembling the triangle planter. Cut one end of the side slats at 45 degrees. Drill pilot holes and insert 2 1/2″ screws to assemble the planter properly. Check if the top angle is square.

Building-the-top-triangle

Building-the-top-triangle

Build the top planter in the same manner described above. Align the edges with attention before inserting the screws.

Fitting the top planters

Fitting the top planters

Fit the triangle planters to the raised garden bed, as shown in the diagram. Align the edges with attention and lock everything tightly with screws. Drill pilot holes and insert screws through the diagonal slats into the previous planters.

Fitting the vertical support

Fitting the vertical support

Attach the 2×2 support to the planters, as shown in the diagram. Drill pilot holes and insert 2 1/2″ screws into the planters.

DIY Corner raised garden bed

DIY Corner raised garden bed

Make sure everything is aligned properly before filling the tiered garden bed with dirt.

Tiered raised garden bed plans

Tiered raised garden bed plans

Smooth the edges with sandpaper for a professional result. Remember that you can adjust the size of the garden bed to suit your needs.

DIY tiered raised garden bed

DIY tiered raised garden bed

Fill the holes and dents with wood putty and let it dry out for several hours. Use 120-200 grit sandpaper to smooth the surface. Remember that you can adjust the design of the planters to suit your needs.

Top Tip: If you want to enhance the look of the project and to protect the components from decay, we recommend you to apply paint or stain.

 

 

This woodworking project was about diy tiered raised garden bed plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

amanda -

how do i print my free plan or any plans off????

Reply

Leave a Reply to amanda Cancel Reply