Home Planter Corner Planter Box Plans

Corner Planter Box Plans

by Ovidiu

 

This step by step diy woodworking project is about corner planter box plans. I have designed this corner planter, so you can finally add some new life to your backyard patio or deck. strange as it might seem, this corner planter is super easy to build. The cedar is weather resistant so the box will last for ages. If you enjoy my design, don’t forget to take a look over the rest of my free plans HERE.

There are so many designs and materials to choose from, that we really recommend you to spend some time researching the most suitable plans for your needs. If you still haven’t found what you are looking for, we strongly recommend you to pay attention to these instructions and to check out the related projects, if you want to get more ideas and potential projects for your home and garden. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Corner Planter Box Plans

Building-a-corner-planter

Building-a-corner-planter

 

Cut & Shopping Lists

  • A – 6 pieces of 2×2 lumber – 16″ long LEGS
  • B – 4 pieces of 1×2 lumber – 10 1/2″ long, 4 pieces – 28″ long, 4 pieces – 16″ long CLEATS
  • C – 32 pieces of 1×4 lumber – 14″ long SLATS
  • D – 2 pieces of 1×2 lumber – 28″ long, 2 pieces – 17 1/2″ long CLEATS
  • E – 13 pieces of 1×4 lumber – 10 1/2″ long BOTTOM
  • G – 2 pieces of 1×2 lumber –  13 1/2″ long, 2 pieces – 19″ long, 2 pieces – 31″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Post hole digger, Concrete mixer

 Safety Gloves, Safety Glasses

Time

 One day

Related

[/tab][/tabs]

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets my latest plans and for some other exclusive content. Also, follow me on Pinterest and on Instagram to get many ideas for your backyard from all the internet! See how you can Support ME with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a corner planter box

Building-the-side-panels

Building-the-side-panels

The first step of the project is to build the panels for the sides of the corner planter. Use 1×4 slats for the panels and 1×2 lumber for the cleats. Add glue to the joints and leave no gaps between the components. Align the edges flush and make sure the corners are square. Insert 1 1/4″ nails to secure the cleats to the panels tightly.

Building-the-sides

Building-the-sides

After the glue dries out, you need to drill pocket holes along the sides of the panel. Attach the legs to the side panels and align everything with attention. Add glue to the joints and insert 2 1/2″ screws.

Building the back panels

Building the back panels

The next step of the project is to build the back panels for the corner planter box. As you can see in the plans, you need to make this panels wider. Use the same techniques described above to assemble the panels together (glue and 1 1/4″ nails).

Fitting the back panels

Fitting the back panels

Drill pocket holes along the sides of the panels and then secure them to the posts with 2 1/2″ screws. Make sure the edges are flush and add glue to the joints.

Building the front panels

Building the front panels

Build the front panels for the corner planter box, so you can assemble the frame.

Front panels

Front panels

Drill pocket holes along the sides of the panels and then secure them into place with 2 1/2″ screws.

Fitting the cleats

Fitting the cleats

Fit the 1×2 cleats to the bottom of the corner planter box. Cut the cleats at the right dimensions and then secure them into place with 1 1/4″ screws. Align the edges flush and make sure you lock the cleats into place tightly. You can adjust the height at which you place the cleats, according to the containers you are going to fit inside.

Fitting the bottom slats

Fitting the bottom slats

Fit the 1×4 slats to the bottom of the planter box. Cut the slats at the right dimensions and then secure them to the cleats with 1 1/4″ screws. Drill pilot holes before inserting the screws to prevent the wood from splitting.

Fitting-the-top-tris

Fitting-the-top-tris

Use 1×2 lumber for the trims. Make 45 degree cuts to the trims, as shown in the diagram. Fit the trims to the planter box and then secure them into place with 1 1/4″ screws. Align the edges flush and add glue to the joints.

Corner planter box plans

Corner planter box plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper. In order to protect the lumber from water damage, I recommend you to cover the components with several coats of paint. This corner planter would be ideal on a patio or even on a deck.

Corner garden planter plans

Corner garden planter plans

This is a simple woodworking project, so any person with basic diy skills can get the job done in a few hours. If you like my project, I recommend you to take a look over the rest of my woodworking plans HERE. Choose from thousands of free designs and fill your life with DIY joy!

 

 

This woodworking project was about corner planter box plans. If you want to see more outdoor plans, we recommend you to check out the rest of my step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

4 comments

Jeff Ainsworth -

Materials list is missing the letter “F”. Can you tell me what the materials would be for “F”?

Reply
Ovidiu -

F is actually E. I labeled them twice by error.

Reply
Mel -

Hello,

Would this work if I put longer legs on it so it is waist high and added an additional leg on the inside corner?

Reply
Ovidiu -

Yes. It’s possible

Reply

Leave a Comment