6×10 Grill Shelter Plans – PDF Download

This step by step diy woodworking project is about 6×10 grill shelter plans. The lean to pavilion project features instructions for building a shelter for your grill, made out of wood and with a 3:12 roof pitch. If you want to protect your stainless steel grill from rain, you should consider building a simple wooden structure. Make sure you check out the rest of plans to see alternatives and more projects for your garden.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

6×10 Grill Shelter Plans – PDF Download

Building-a-6x10-bbq-shelter

Building-a-6×10-bbq-shelter

 

Cut & Shopping Lists

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One weekend

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

It’s that easy to build a grill cover!

 

How to build a 6×10 bbq grill shelter

Laying-out-the-posts

Laying-out-the-posts

First of all, you need to lay out the posts for the shelter. Use batter boards and string to lay out the location for the posts. Measure the diagonals and make adjustments until they are perfectly equal. In addition, we recommend you to apply the 3-4-5 rule to the corners. This shelter has a 6 ft x 10 ft base, outside post to outside post.

Posts

Posts

Build the posts from 4×4 lumber, making sure you cut the notches to the top of the posts. Make 1 1/2″ deep parallel cuts inside the area and then remove the excess with a hammer and a chisel. Smooth the cut edges with sandpaper for a professional result.

Anchoring the posts of the anchor

Anchoring the posts of the anchor

You can set the posts into concrete for about 2-3′ or you can pour footings and use posts supports. Use a post hole digger to make the 12″ in diameter holes, install tube forms and fill them with concrete. Install the post anchors, making sure everything is aligned properly. After a few days, you should set the posts to the anchors and plumb them with a spirit level. Drill pilot holes and insert appropriate lag screws (they usually come with the post anchors) to lock them into place tightly.

Fitting-the-support-beams

Fitting-the-support-beams

Fit the 2×6 support beams to the front and back of the shelter. Align the edges, make sure the corners are square, drill pilot holes through the beams and insert 3″ lag screws into the posts.

 

Attaching the side panels

Fitting-the-back-cleats

Fitting-the-back-cleats

Next, you need to attach the 2×4 cleats to the back of the structure. Cut the components at the right dimensions and drill pocket holes at both ends. Fit the components to the structure and lock them to the vertical posts using 2 1/2″ screws. Make sure the corners are square and the edges flush. You can adjust the distance between the rails to suit your needs.

Align the cleats to the interior edges of the posts.

Fitting-the-back-cleats

Fitting-the-back-cleats

Fit the 2×4 cleats to the sides of the shelter. Drill pocket holes and insert 2 1/2″ screws, as shown in the diagram.

Fitting-the-back-slats

Fitting-the-back-slats

Next, you need to attach the vertical rails to the supports. Build the rails from 1×6 lumber. Fit the rails equally-spaced (use a 1/2″ wood block as spacer), drill pilot holes at both ends and lock them to the supports using 1 5/8″ screws.

Fitting-the-side-rails

Fitting-the-side-rails

Next, we need to attach the rails to the sides of the pavilion. Fit pieces of 3″ between the balusters to create even gaps. Align the boards at both ends and secure them into place with 1 5/8″, after drilling pilot holes.

Fitting-the-handrails

Fitting-the-handrails

Last but not least, attach the 1×4 handrails. Align the boards between the posts and secure them into place with 2 1/2″ screws. Drill pilot holes before inserting the screws, to prevent the wood from splitting.

6x10 bbq shelter plans - front view

6×10 bbq shelter plans – front view

 

6x10 bbq shelter plans

6×10 bbq shelter plans

Fill the holes with wood putty and smooth the surface with fine-grit sandpaper for a professional result. Apply a few coats of stain or paint to enhance the look of the shelter and to protect the components from decay.

6x10 bbq shelter plans - dimensions

6×10 bbq shelter plans – dimensions

If you want, you can easily adjust the size of the shelter to suit your needs. This lean to shelter will protect the bbq grill from the elements and you can be at peace when it’s raining cats and dogs. This is a basic structure that requires little woodworking skills and resources, so any homeowner can get the job done in a weekend.

Top Tip: Check out the rest of the projects, to see more building plans for your backyard.

 


Get PDF Plans

 

This woodworking project was about 6×10 bbq grill shelter plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 




Leave a Reply

error: Content is protected !!