Home Greenhouse 8×10 Greenhouse Doors, Vents and Trims Plans

8×10 Greenhouse Doors, Vents and Trims Plans

by Ovidiu

 

This step by step diy project is about 8×10 greenhouse doors, vents and trims plans. This is PART 2 of the greenhouse project, where I show you how to build the vents, the doors and the trims for the greenhouse. In addition, I show you how to fit the 1×2 trims to the exterior of the greenhouse, so you can lock the greenhouse plastic into place. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

 

 

Projects made from these plans

Add-image

 

 

8×10 Greenhouse Doors, Vents and Trims Plans

Building-a-8x10-greenhouse

Building-a-8×10-greenhouse

 

Cut & Shopping Lists

  • H – 2 pieces of 2×2 lumber – 69″ long, 2 pieces – 36″ long, 1 piece – 29″ long, 2 pieces of 1×2 lumber – 69″ long, 2 pieces – 36″ long, 1 piece – 29″ long 2xDOOR
  • I – 2 pieces of 2×2 lumber – 22 1/2″ long, 2 pieces – 19 1/2″ long, 2 pieces of 1×2 lumber – 22 1/2″ long, 2 pieces – 19 1/2″ long 6xVENT
  • J – 6 pieces of 1×2 lumber – 72″ long, 2 pieces – 120″ long 2xSIDE TRIMS
  • K – 4 pieces of 1×2 lumber – 72″ long, 2 pieces – 96″ long, 2 pieces – 52 1/4″ long, 2 pieces – 22″ long 2xFRONT TRIMS
  • L – 12 pieces of 1×2 lumber – 52 1/4″ long, 3 pieces – 120″ long, 6 pieces – 22 1/2″ long ROOF TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building the greenhouse doors, trims and vents

Framing the vent openings

Framing the vent openings

The first step of the project is to frame the vent openings to the roof. Cut the 2×2 supports at 22 1/2″ screws and drill pocket holes at both ends. Fit the supports to the roof rafters and then insert 2 1/2″ screws to lock them into place tightly. Make sure you align the edges and check if the corners are square.

Side-wall-trims

Side-wall-trims

Fit the greenhouse plastic to the greenhouse and stretch it properly. Continue the project by attaching the 1×2 trims to the side walls of the greenhouse. Align the edges flush and use 1 5/8″ screws to lock the trims into place tightly.

Roof trims

Roof trims

Next, fit the trims to the roof of the greenhouse. Use screws to secure the trims into place, so you can remove them easily when replacing the film.

Front wall - Trims

Front wall – Trims

Fit the 1×2 trims to the front of the greenhouse. Cut the trims at the right dimensions and then secure them into place with 1 5/8″ screws. You need to predrill the trims before inserting the screws, for a professional result.

Door-frame---8x10-greenhouse

Door-frame—8×10-greenhouse

Build the door frame from 2×2 lumber. As you can easily see in the diagram, you need to drill pilot holes before inserting the 2 1/2″ screws. Align the edges flush and make sure the corners are square.

Door trims

Door trims

Fit greenhouse plastic to the door frames and then attach the 1×2 trims. Align the edges flush, otherwise they won’t fit into place.

Fitting the door

Fitting the door

Fit the doors to the front and back opening and then lock them to the jambs with hinges. Install a latch so you look the door. Install handles, as well, for a professional result.

Building-the-vent-frame

Building-the-vent-frame

Build the vents for the greenhouse from 2×2 lumber. Drill pilot holes through the 22 1/2″ long components and insert 2 1/2″ screws into the perpendicular components. Make sure the corners are square and align the edges flush.

Vent trims

Vent trims

Fit greenhouse plastic of polycarbonate to the frame of the vents. Afterwards, attach the 1×2 trims so you can lock them together tightly.

Fitting the vents

Fitting the vents

Fit the vents to the opening and lock them into place tightly with hinges. Alternatively, you can install automatic vent openers, so you can control the temperature inside the greenhouse.

8x10 Greenhouse - Front view

8×10 Greenhouse – Front view

You need to take care of the finishing touches before using the greenhouse. Therefore, double check the joints and make sure the structure is sturdy. You can even fit some diagonal braces to enhance the frame sturdiness. Smooth the edges with sandpaper and then apply a few costs of paint, making sure you choose a product that is not harmful to the plants.

8x10 Greenhouse Plans

8×10 Greenhouse Plans

This is a straight forward project, so you can build this greenhouse in less than 1 week. Don’t forget to take a look over PART 1 of the woodworking project to learn how to build the frame for this greenhouse. In addition, see a lot more greenhouse plans HERE.

 

 

This woodworking project was about 8×10 greenhouse door and trims plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Jose -

I need my 8×10 or 8×12 greenhouse plan, Iam. Installing a
Hydroponic garden all year.
Thank you for your easy plans . Now I can builder myself.

Reply
Ovidiu -

See how you can save the plans by yourself here: http://myoutdoorplans.com/faq/

Reply

Leave a Reply to Ovidiu Cancel Reply