Home 16x20 16×20 Lean to Pavilion Plans

16×20 Lean to Pavilion Plans

by Ovidiu

 

This step by step diy woodworking project is about a 16×20 lean to pavilion plans. If you want to build a beautiful and sturdy pavilion for your backyard, these plans will guide you in a step by step manner. This pavilion is extra-sturdy, as it features a lot of braces on all corners. Take a look over the rest of our woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

16×20 Lean to Pavilion – Free DIY Plans

Building-a-lean-to-picnic-table

Building-a-lean-to-picnic-table

 

Cut & Shopping Lists

  • A – 10 pieces of 6×6 lumber – 132″ long POSTS
  • B – 2 pieces of 6×6 lumber – 240″ long, 4 pieces of 6×6 lumber – 192″ long TOP PLATES
  • C – 20 pieces of 6×6 lumber – 26 1/4″ long BRACES

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

  • PART 1: 16×20 Lean to Pavilion Plans
  • PART 2: 16x20 Lean to PavilionRoof Plans
  • PART 3: 16×20 Lean to Pavilion Railings Plans

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a 16×20 Lean to Pavilion

Fitting-the-posts---16x20-lean-to-pavilion

Fitting-the-posts—16×20-lean-to-pavilion

The first step of the project is to layout the posts for the 16×20 lean to pavilion. Use batter boards and string to determine the location of the posts. Apply the 3-4-5 rule to every corner of the pavilion, so you make sure they are right angled. Moreover measure the diagonals and make sure they are equal. Determining the location for the pavilion is essential, as you have to comply with the local building codes. Make sure the surface is level and remove the vegetation layer.

Posts

Posts

Dig 3′ deep holes into the ground with a post hole digger. Align the holes with attention and then fit form tubes. Fit the 6×6 posts with attention and align them using string. Use a spirit level to plumb the posts and then lock them into place with temporarily braces. Fill the tube forms with concrete and let it dry out for a few days. Setting the pressure treated/cedar posts in concrete is a lot better than using post anchors, as the posts will be locked in the concrete footers.

Top-plates---16x20-pavilion

Top-plates—16×20-pavilion

Use 6×6 lumber for the top plates of the pavilion. Use a circular saw to make the notches to beams, as shown in the diagram. Make parallel cuts inside the marked areas and then remove the excess with a chisel. Smooth the surface with sandpaper.

Fitting the top plates

Fitting the top plates

Fit the top plates to the top of the posts. Plumb the posts with a spirit level and make sure the plates are horizontal. Check if the corners are square and align the edges with attention. Drill pilot holes through the plates and insert 8″ screws into the top of the posts.

Braces

Braces

Use 6×6 lumber for the braces. Use a miter saw to make 45 degree cuts at both ends of the braces.

Fitting the braces

Fitting the braces

Last but not least, you need to attach the 6×6 braces to the structure of the pavilion, so you can enhance the rigidity. Align the edges with attention and then secure them into place tightly, with 5″ screws. Drill pilot holes before inserting the screws, to prevent the wood from splitting.

16x20 Lean to Pavilion Plans - Back view

16×20 Lean to Pavilion Plans – Back view

You should check out PART 2 of the 16×20 pavilion plans, so you learn how to build the lean to roof. Check PART 3 of the project, so you learn how to build the railings.

16x20 Lean to Pavilion Plans

16×20 Lean to Pavilion Plans

Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-220 grit sandpaper and remove the residues with a damp cloth.

Top Tip: Apply a few coats of paint or stain to the components, to enhance the look of the project. Make sure you take a look over the rest of my pergola/gazebo/pavilion plans HERE. See all my free woodworking plans (over 1000) HERE.

 

 

This woodworking project was about 16×20 outdoor pavilion plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result. Feel free to SHARE my plans with your friends.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

8 comments

Hector -

Hi,I have a question. On the 16×20 lean to pavilion. What are the demensions if I built it with 4×4 instead of using 6×6
for fitting the post. Please advice.
Thanks ;
V/R Hector

Reply
Ovidiu -

That will change everything in terms of dimensions. I would need to redo the plans entirely. Can’t give you an answer in one sentence. In addition, I don’t recommend 4x4s for this pavilion size

Reply
Brian Thompson -

How would the lumber list change if I wanted to make this 20×20? Thanks for your time.

Reply
Ovidiu -

It would be a whole different list.

Reply
Vaughn -

Could you get away with doing a 16×20 lean but only using 6 posts? Just one in the middle of the 20ft run and nothing for the 16ft sides? It would change the entire plan I know, just curious if it really requires this much support? I’m looking for a more stripped down version of this.

Reply
Ovidiu - Reply
HFrac -

Could you use 4×4 instead of 6×6?

Reply
Ovidiu -

I don’t recommend that

Reply

Leave a Reply to Ovidiu Cancel Reply