Home Furniture XL Big Green Egg Table Plans

XL Big Green Egg Table Plans

by Ovidiu

 

This step by step diy woodworking project is about XL big green egg table plans. If you want to learn more about building a wooden table for your XL big green egg, we suggest you to pay attention to the instructions described in the article. You can build this table in just one weekend with common household tools and under 100 $ worth of raw materials. Make sure you take a look over the rest of plans to see alternatives and more projects for your garden.

Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue to the joints, in order to enhance the rigidity of the structure. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

It’s that simple to build a big green egg table!

 

 

XL Big Green Egg Table Plans

Building-a-green-egg-table

Building-a-green-egg-table

 

Cut & Shopping Lists

  • A – 4 pieces of 2×4 lumber – 31″ long LEGS
  • B – 5 pieces of 2×4 lumber – 28 1/2″ long, 4 pieces – 15″ long, 1 piece – 52″ long BRACES
  • C – 2 pieces of 1×6 – 58″ long APRONS
  • D – 5 pieces of 1×6 lumber – 55″ long SHELF
  • E – 9 pieces of 1×4 lumber – 60″ long TABLETOP

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Post hole digger, Concrete mixer

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

How to build a big green egg table

Building-the-sides-of-the-table

Building-the-sides-of-the-table

The first step of the project is to build the sides for the big egg table. Cut the components from 2×4 lumber. Drill pilot holes through the horizontal braces and insert 2 1/2″ screws into the vertical legs. Align the edges with attention and make sure the corners are square.

Fitting the bottom supports

Fitting the bottom supports

Next, you need to attach 2×4 supports to the base of the legs. Drill pilot holes and lock the components to the legs using 2 1/2″ screws. Add glue to enhance the bond of the components. The supports will create a base for installing the caster wheels, so that you can move the table easily.

Fitting-the-stretcher

Fitting-the-stretcher

Fit the 2×4 stretcher to the base of the table, as shown in the diagram. Drill pilot holes through the bottom braces and insert 2 1/2″ screws into the stretcher. Center the stretcher to the braces.

Fitting the shelf

Fitting the shelf

Attach 1×6 slats to the bottom braces to create the shelf. Place a piece of 1/4″ plywood between the slats, to create even gaps. Drill pilot holes through the slats and insert 1 5/8″ screws into the braces.

Tabletop-frame

Tabletop-frame

Attach 1×6 aprons to the top of the legs, as shown in the plans. Drill pilot holes and secure the aprons to the legs using 1 5/8″ screws. In addition, insert 2 1/2″ screws through the aprons into the top support.

Attaching the tabletop slats

Attaching the tabletop slats

Attach 1×4 slats to the top of the big egg table. Leave about 1/8″ between the slats. Make sure the tabletop overhangs 1″ on all four sides of the frame. Drill pilot holes through the slats and secure them to the frame using 1 5/8″ screws.

Marking the cut line

Marking the cut line

Next, you need to cut out the hole for the XL green egg. Mark the center of the square and mark the cut line. Use a jigsaw to cut out the hole. Smooth the cut edges with sandpaper and round the edges with a router, for a more finished look.

Attaching the caster wheels

Attaching the caster wheels

Attach caster wheels to the bottom of the legs. Center the caster wheels to the base and lock them into place with 1 5/8″ screws.

Building a XL big green egg table

Building a XL big green egg table

Fit a paver under the big egg.

XL Big Green Egg Table Plans

XL Big Green Egg Table Plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-150 grit sandpaper.

Top Tip: If you want to enhance the look of the woodworking project and to protect the table from decay, we recommend you to cover the components with paint or stain.

 

 

This woodworking project was about xl green egg table plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

5 comments

Jeremiah Wentz -

Love the table. Is there a cover that would fit this?

Reply
Chase -

Here is a cover for this table perfect fit.

https://amzn.to/2Zivg3p

Reply
Summer Kemp-Schlemmer -

Question: It looks like you have two separate lists for materials. Is the first a list of cuts and the second what I take to the lumberyard?

Thanks in advance.

Reply
Ovidiu -

Yes, exactly.

Reply
Phil Thaxton -

I’m a beginner when it comes to cutting circles, and I don’t think there’s enough info listed in that step. Could you give me a little more input?

Thanks in advance!

Reply

Leave a Comment