This step by step diy woodworking project is about tree plant stand plans. This is a variation of my previous and popular plant stand design. This is a quick and simple project, that you can build in several hours without much effort. Make sure you take a look over my other designs, as there are so many options to choose from. If you enjoy my design, don’t forget to take a look over the rest of my free plans HERE.
There are so many designs and materials to choose from, that we really recommend you to spend some time researching the most suitable plans for your needs. If you still haven’t found what you are looking for, we strongly recommend you to pay attention to these instructions and to check out the related projects, if you want to get more ideas and potential projects for your home and garden.
Projects made from these plans
Tree Plant Stand Plans
- A – 4 pieces of 1×2 lumber – 36″ long LEGS
- B – 10 pieces of 1×2 lumber – 10″ long FRAME
- C – 8 pieces of 1×2 lumber – 23 1/2″ long, 2 pieces – 13 1/2″ long BRACES
- D – 17 pieces of 1×4 lumber – 13 1/2″ long SLATS
How to build a tree plant stand
The first step of the project is to build the sides for the tree plant stand. Cut the components from 1×2 lumber at the right dimensions. Drill pilot holes through the horizontal supports and insert 1 5/8″ screws. Align the edges with attention and make sure the corners are square.
The next step of the project is to assemble the frame of the tree plant stand, by attaching the side supports. Take accurate measurements, check if the corners are square, drill pilot holes and insert 1 5/8″ screws to secure everything together tightly.
Use 1×2 lumber for the plant stand supports. Use a jigsaw to make the ends of the supports round. Smooth the edges with sandpaper for a professional result.
Fit the supports to the tree frame and use a spirit level to check if they are horizontal. Drill pilot holes through the braces and insert 1 5/8″ screws to secure them into place.
Fit 1×4 slats to the top of the supports, as shown in the diagram. Place a piece of 1/4″ plywood between the slats so you can create even gaps. Drill pilot holes and insert 1 5/8″ screws to secure the slats into place tightly.
Last but not least, you need to take care of the finishing touches. Drill the holes with wood putty and then smooth the surface with sandpaper. Apply a few coats of paint or stain to enhance the look of the plant stand tree.
This is a simple woodworking project, so any person with basic diy skills can get the job done in a few hours. If you like my project, I recommend you to take a look over the rest of my woodworking plans HERE. See all my stand plans HERE. Choose from thousands of free designs and fill your life with DIY joy!
This woodworking project was about tree plant stand plans. If you want to see more outdoor plans, we recommend you to check out the rest of my step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.