Home Chair Large Outdoor Chair Plans

Large Outdoor Chair Plans

by Ovidiu

 

This step by step diy project is about rustic large outdoor chair plans plans. If you want to enhance the look of your backyard, you should consider building a few chairs. Using my easy to follow plans you can build this chair and the matching table with minimum effort and basic tools. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans available for this project in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

Large Outdoor Chair Plans

Building-an-outdoor-chair

Building-an-outdoor-chair

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 23″ long, 2 pieces – 24 3/4″ long LEGS
  • B – 2 piece of 2×4 lumber – 27″ long, 3 pieces – 18″ long FRAME
  • C – 4 pieces of 1×4 lumber – 27″ long SEAT
  • D – 2 pieces of 2×4 lumber – 21 3/4″ long, 2 pieces of 1×4 lumber – 22 1/4″ long ARMRESTS
  • E – 2 pieces of 2×4 lumber – 24″ long SUPPORTS
  • F – 5 pieces of 1×4 lumber – 24″ long BACKREST

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a backyard chair

Building-the-frame

Building-the-frame

The first step of the project is to build the seat frame. Cut the components from 2×4 lumber, as shown in the diagram. Drill pilot holes through the 27″ long components and insert 2 1/2″ screws into the perpendicular components. Leave no gaps between the components and insert waterproof glue.

Building-the-legs

Building-the-legs

Build the legs for the chair from 2×4 lumber. Smooth the ends with sandpaper.

assembling-the-sides

Assembling-the-sides

Assemble the sides for the chair from 2×4 lumber. Drill pilot holes through the supports and insert 2 1/2″ screws. Add glue to the joints and make sure the corners are square.

assembling-the-chair-frame

Assembling-the-chair-frame

Attach the sides of the chair to the seat frame. Leave 11″ from the ground to the bottom edge of the seat frame. Make sure the corners are right angled.

Building the backrest supports

Building the backrest supports

Build the backrest supports from 2×4 lumber, as well. Round the exposed corner of the supports using a jigsaw. Smooth the edges with sandpaper.

fitting-the-backrest-supports

Fitting-the-backrest-supports

 

fitting-the-backrest-slats

Fitting-the-backrest-slats

Attach the 1×4 slats to the backrest supports. Place a piece of 1/2″ plywood between the slats to create even gaps. Drill pilot holes and insert 1 1/4″ screws to lock them into place.

fitting-the-seat-slats

Fitting-the-seat-slats

Attach 1×4 slats to the seat frame, in the same manner described above.

fitting-the-armrests

Fitting-the-armrests

Use 1×4 lumber for the armrests. Round the exposed end of the components and lock it into place with 1 1/4″ screws, after drilling pilot holes.

large-outdoor-chair-plans

Large-outdoor-chair-plans

Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to enhance the look of the chair and to protect the components from the elements.

build-an-outdoor-chair

Build-an-outdoor-chair

This is a simple project you should be able to build in a few hours without much effort. This large chair is sturdy and is the perfect choice for any backyard or patio. Premium Plans available for this project in the Shop.

If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

 

 

This woodworking project was about large outdoor chair plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

6 comments

Sami -

thanks a lot for all your sharings Ovidiu,
this support is priceless for me
your plans looks so useful and easy to understand for amateurs like me,
i will keep following your channel and plans and i will do my best to support you.

Reply
Ovidiu -

Thank you for the nice words. Looking forward to seeing your projects!

Reply
Joe -

Built this chair tonight for my first furniture build. Thanks for the plans. It was a very simple build for a first timer like me and has given confidence to start planing my next project. I love this chair very sturdy and large enough for a big boy like me. Can’t wait to relax in it the next time I grill.

Reply
Ovidiu -

That’s awesome. Gotta keep yourself busy these days.

Reply
Amado Chavez -

Great set of plans, can not wait to work on this weekend project.

Reply
Ovidiu -

Thanks. Looking forward to seeing your future projects.

Reply

Leave a Reply to Joe Cancel Reply