Home Furniture How to Build Garage Shelves

How to Build Garage Shelves

by Ovidiu

 

This step by step diy woodworking project is about how to build garage shelves. The project features instructions for building a small garage shelving unit, using common materials and tools. Use 2×4 lumber, 1×4 lumber and 3/4″ plywood to build this storage unit. Make sure you take a look over the rest of the related projects to see alternatives and more projects for your workshop, as well as for your backyard.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

How to Build Garage Shelves

Building small garage shelves

Building small garage shelves

 

[tabs tab1=”Materials” tab2=”Tools” tab3=”Time”]

[tab id=1]

  • A – 4 pieces of 2×4 lumber – 96″ long LEGS
  • B – 8 pieces of 2×4 lumber – 46 1/2″ long SUPPORTS
  • C – 8 pieces of 1×4 lumber – 24″ long SIDE SUPPORTS
  • D – 4 pieces of 3/4″ plywood – 24″x48″ long 4xSHELF

[/tab]
[tab id=2]

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

[/tab]
[tab id=3]

 One day

[/tab]

[/tabs]

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building small shelving

Building the front and back frames

Building the front and back frames

The first step of the project is to build the front and back frames for the shelving unit. Cut the components from 2×4 lumber at the dimensions shown in the diagram. Drill pilot holes through the supports and insert 2 1/2″ screws into the vertical legs. Check if the corners are square and align the edges before inserting the screws.

Fitting the side supports

Fitting the side supports

Continue the garage project by assembling the frame of the shelving unit by attaching the side supports. Cut the components from 1×4 lumber and attach them to the legs and to the horizontal supports using 1 1/4″ screws, after drilling pilot holes.

Building the shelves

Building the shelves

Build the shelves from 3/4″ plywood. For the top shelf you don’t need to make any notches. Use a circular saw to make notches to the corners of the other shelves. Smooth the edges with fine-grit sandpaper.

Fitting the shelves

Fitting the shelves

Fit the shelves to the frame of the storage unit and align the edges with attention. Drill pilot holes through the plywood shelves and insert 1 1/4″ screws into the frame of the storage unit.

How to build garage shelves

How to build garage shelves

Fill the holes and dents with wood putty and let it dry out for several hours. Use 120-200 grit sandpaper to smooth the surface. Remember that you can adjust the design and dimensions of the shelving unit to suit your needs.

Top Tip: If you want to enhance the look of the project and to protect the components from decay, we recommend you to apply paint or stain.

 

 

This woodworking project was about how to build garage shelves plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment