Home Bench Double Loveseat Bench with Table Plans

Double Loveseat Bench with Table Plans

by Ovidiu

 

This step by step woodworking project is about double loveseat bench with table plans. I have designed this garden bench for 4 persons so you can enjoy the nice evening in the backyard with the family around the fireplace. This double bench is easy to build and you can easily get the job done in just one weekend with basic tools.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the bench won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

 Add-image

 

 

Double Loveseat Bench with Table Plans

Building-double-loveseat-with-table

Building-double-loveseat-with-table

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 113″ long, 8 pieces – 18″ long FRAME
  • B – 2 pieces of 2×4 lumber – 23″ long, 2 pieces – 24 3/4″ long LEGS
  • C – 8 pieces of 2×4 lumber – 24″ long BACKREST SUPPORTS
  • D – 2 pieces of 2×4 lumber – 14 1/2″ long, 2 pieces – 23″ long LEGS
  • E – 2 pieces of 2×4 lumber – 17″ long, 3 pieces of 1×6 lumber – 21 3/4″ long TABLE
  • F – 2 pieces of 1×4 lumber – 22 1/4″ long, 2 pieces of 2×4 lumber – 21 3/4″ long ARMRESTS
  • G – 8 pieces of 1×4 lumber – 48″ long SEAT
  • H – 10 pieces of 1×4 lumber – 46 1/2″ long BACKREST

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a double loveseat bench with table

Frame---bench

Frame—bench

The first step of the project is to build the supports for the seat frame. Use 2×4 lumber and then make angle cuts at one one. Smooth the edges with sandpaper.

Seat-frame---bench

Seat-frame—bench

The first step of the project is to build the seat frame for the double chair bench. Use 2×4 lumber for the components, making sure you cut them at the right dimensions. Drill pocket holes at both ends of the short components and secure them to the long components using 2 1/2″ screws. Add glue to the joints and make sure the corners are square. Leave no gaps between the components.

Back Legs

Back Legs

You can see in the diagram more information about cutting the back legs. As I have already said, cut both ends at 75 degree, which means you need to make 15 degree cuts. Use the information from the diagram to build the back legs properly. The easiest way to get accurate angle cuts is to use a miter saw. Smooth the cut edges with sandpaper.

Attaching the armrest support

Attaching the armrest support

Continue the project by attaching the top support to the side legs. Cut one end of the 2×4 support at 75 degrees. Attach the support to the top of the legs, making sure the edges are perfectly aligned. Drill pilot holes and secure the support to the legs using 2 1/2″ screws. Pre-drilling prevents the wood from splitting.

Use a carpentry square to make sure the corners are 90 degrees. In addition, you an set the legs against a straight line, so you make sure they are aligned properly, before attaching the horizontal supports.

Assembling the frame of the bench

Assembling the frame of the bench

After assembling the sides of the bench, you need to attach it to the seat frame, as shown in the diagram. Make sure the corners are square. Plumb the sides with a spirit level and check if the seat is perfectly horizontal. Insert 2 1/2″ screws through the frame into the legs.

Building the backrest supports

Building the backrest supports

Build the backrest supports out of 2×4 lumber. Round the top corner of the supports using a jigsaw. Smooth the edges with sandpaper and remove the residues with a damp cloth.

Fitting-the-backrest-supports

Fitting-the-backrest-supports

Attach the supports to the seat frame, as shown in the diagram. Drill pilot holes through the supports and insert 2 1/2″ screws into the seat frame. Leave no gaps between the components.

Fitting the middle legs

Fitting the middle legs

Use 2×4 lumber for the middle legs. Cut the legs at the right dimensions and then secure them to the frame of the bench, as shown in the plans. Drill pilot holes and insert 2 1/2″ screws.

Fitting the seat slats

Fitting the seat slats

Build the seat slats out of 1×4 lumber. Cut the components at the right dimensions and secure them to the frame using 1 5/8″ screws. Place the seat slats equally-spaced, if you want to get a professional result. Place a piece of 1/2″ plywood between the slats to get consistent gaps.

Backrest slats

Backrest slats

Next, attach the 1×4 slats to the backrests of the chairs. Place the slats equally-spaced and lock them to the supports using 1 5/8″ screws. Smooth the edges with sandpaper. Align the edges before inserting the screws.

Table supports

Table supports

Fit the horizontal supports to the structure, as described in the diagram. Drill pocket holes at both ends of the 2×4 support placed between the backrests. Use 2 1/2″ screws to lock them into place tightly.

Fitting the table slats

Fitting the table slats

Fit the 1×6 slats to the supports to create the tabletop. Leave 1/4″ between the slats and secure them to the frame using 1 1/4″ screws. Smooth the exposed edges with sandpaper.

Fitting the armrests

Fitting the armrests

Build the armrests out of 1×4 lumber. Round one end of the components and smooth the edges with 120 grit sandpaper. Use 1 1/4″ screws to secure the armrests into place. Fill the holes with wood putty.

Double loveseat with table plans - backview

Double loveseat with table plans – backview

If you are looking for outdoor furniture plans or you are just trying to learn how to build an outdoor bench, this the perfect starting point to your woodworking journey. This double bench project is the right choice if like to relax on the front porch, or reading a good book next to the loved ones. The small table makes it easy to drink your coffee or a cold lemonade in the hot summer days, while breathing fresh air and watching the singing birds.

If you liked this patio furniture plan, then you would also love the corresponding chair. In this manner, you can create a relaxation area where you can hang out with your friends and family. These would also be perfect around a fire pit or under a pergola.

Double loveseat with table plans

Double loveseat with table plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the project and to protect the wooden bench from decay, we recommend you to cover the components with paint or stain.

 

 

This woodworking project was about double loveseat bench with table plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment