Home Chair Double Chaise Lounge Plans

Double Chaise Lounge Plans

by Ovidiu

 

This step by step diy project is about double chaise lounge plans. I have designed this double chaise lounge so you can bask in the sun along with the significant other. This sun lounger is easy to build as it only requires 2x4s and 1x4s, as well as basic tools and skills. Take a look over the rest of our woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Double Chaise Lounge Plans

Building-a-double-chaise-lounge

Building-a-double-chaise-lounge

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 85″ long, 2 pieces – 82″ long RAILS
  • B – 2 pieces of 2×4 lumber – 45″ long, 2 pieces – 21″ long FRAME
  • C – 12 pieces of 1×4 lumber – 48″ long SEAT
  • D – 2 pieces of 1×4 lumber – 37 1/2″ long, 9 pieces – 17″ long 2xBACKREST
  • E – 2 piece of 2×4 lumber – 24″ long, 2 pieces of 2×6 lumber – 24″ long SUPPORT
  • F – 2 piece of 2×6 lumber – 12″ long, 2 pieces – 10 1/2″ long LEGS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

How to build a double sun lounger

Building-the-rails

Building-the-rails

The first step of the project is to build the rails for the chaise lounge. In order to get the job done in a professional manner, you need to build the components from 2×4 lumber. Mark the cut lines on the beams and get the job done with a saw. Use a chisel to clean the notches. Smooth the edges and remove the excess with a damp cloth.

Building the frame for the double sun lounger

Building the frame for the double sun lounger

Next, you need to assemble the frame of the double lounger by attaching the 2×4 supports. Drill pocket holes at both ends of the supports and secure them to the side rails with 2 1/2″ screws. Add glue to the joints and make sure the corners are square.

Fitting the middle rails

Fitting the middle rails

Fit the middle rails to the frame of the lounger. Drill pocket holes at both ends of the 2×4 components and secure them to the frame with 2 1/2″ screws. Make sure the corners are square and add waterproof glue to the joints.

Attaching the legs

Attaching the legs

Build the legs for the chaise lounge from 2×4 lumber. Attach the legs to the frame after making sure the corners are square. Drill pilot holes and insert 2 1/2″ screws to secure them into place.

Fitting the middle supports

Fitting the middle supports

In order to enhance the rigidity of the frame, you need to attach supports, as shown in the diagram. Drill pocket holes at both ends of the supports and secure them to the frame with 2 1/2″ screws. Make sure the corners are square.

Fitting the slats

Fitting the slats

Attach 1×4 slats to the frame, as shown in the diagram. Drill pilot holes and insert 1 1/4″ screws to lock the slats to the frame. Place a piece of 1/2″ plywood between the slats to create even gaps between the components.

Backrest

Backrest

Build the two backrests for the chaise lounge from 1×4 lumber. Drill pocket holes at both ends of the 17″ long slats and secure them to the vertical components with 1 1/4″ screws. Add glue to the joints and make sure the gaps are even between the slats. Add waterproof glue to the joints and remove the excess with a damp cloth.

Building-the-frame-of-the-backrest-support

Building-the-frame-of-the-backrest-support

Build the frame for the backrest from 2×2 lumber. Drill pocket holes at both ends of the 17 1/2″ components and secure them to the perpendicular components with 2 1/2″ screws. Add glue to the joints and make sure the corners are square.

Assembling the backrest

Assembling the backrest

Fit the frame the backrest, as hown in the diagram. Drill pilot holes through the frame and insert 2″ screws into the backrest.

Attaching the backrests

Attaching the backrests

Fit the backrests to the frame of the chaise lounge. Use hinges to secure the backrest to the seat of the double lounger. Two hinges will do the job for the backrest.

Double chaise lounge plans

Double chaise lounge plans

Once you have assembled the chaise lounge, you need to take care of the finishing touches. Drill the holes and the dents with wood putty and smooth the surface with 120-220 sandpaper. Apply a few coats of stain or paint to enhance the look of the double lounger and to protect the components from elements.

45 degree lean

45 degree lean

Place a 2×6 support to the first notch, so the lean of the backrest is of 45 degrees.

30 degree lean

30 degree lean

For a 30 degree lean, you should fit a piece of 2×4 lumber to the first notch.

15 degree lean

15 degree lean

For a 15 degree lean, place a 2×4 support to the second notch. As you can see, it is so easy to adjust the angle of the backrest to suit your needs.

Double lounger plans

Double lounger plans

This is a super simple project anyone should be able to build in a day without much effort. Remember that you need to adjust the size of the components so they suit your particular own needs. The best step of the project is that you this design will match any style of outdoor furniture.

And don’t forget to check out the single lounger plans, although double the chair, double the fun. Take a look over the rest of the outdoor furniture plans on my blog, for even more building inspiration.

 

 

This woodworking project was about double chaise lounge plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

3 comments

Bren -

How exactly do you put on the hinges and what size do you recommend? Thanks

Reply
Julian -

The hinges are placed at the top of the chaise lounge. The cushions will cover the hinges. I would use a hing with an open width of at least 2″, so you can drive the screws at least 1/2″ from the edges.

Reply
Greg -

What kind of hinges? Door hinges? Gate hinges? Where exactly do you place them. A diagram would help

Reply

Leave a Comment