This step by step diy woodworking project is about craft table plans. If you want to learn how to build a nice craft table, we recommend you to pay attention to the instructions and diagrams shown in this article. Plan every aspect of the construction from the very beginning, if you want to keep the costs under control and to prevent costly mistakes. Don’t forget to take a look over the rest of the table plans, as you could find a more appealing design.
There are many aspects that you should take into account when building the craft table, especially if you don’t have a large expertise in the woodworking field. Therefore, we recommend you to choose the best design and plans for your needs. In addition, invest in high-quality materials, such as pine, redwood or cedar, as they don’t only have a nice appearance, but they also are highly durable. See all my Premium Plans HERE.
Projects made from these plans
[tabs tab1=”Materials” tab2=”Tools” tab3=”Time” tab4=”Related Plans”] [tab id=1]
- A – 4 pieces of 1×12 lumber – 33 1/2″ long, 2 pieces – 38″ long, 6 pieces – 36 1/2″ long FRAMES
- B – 4 pieces of 1×2 lumber – 33 1/2″ long, 2 pieces – 38″ long, 6 pieces – 36 1/2″ long TRIMS
- C – 2 pieces of 1×12 – 36 1/2″ long SUPPORTS
- D – 1 piece of 3/4″ plywood – 38″x60″ long TABLETOP
- 2 1/2″ screws
- wood stain
- wood filler
- wood glue
[/tab] [tab id=2]
[/tab] [tab id=3]
Craft Table Plans
Top Tip: After choosing the right design for your needs, we recommend you to adjust the size and the shape of the craft table to suit your needs.
Building a craft table
The first step of the project is to build the sides of the craft table. We recommend you to cut the components at the right size, out of 1×12 lumber. Take accurate measurements and get the job done with a circular saw.
It is essential to check if the corners are right-angled before locking the components with 1 1/4″ screws. Make sure you drill pocket holes as shown in the diagram, as to create durable and sturdy joints. Drill pocket holes at both ends of the shelves. Drill pocket holes along the top of the vertical slats.
If you want to enhance the appearance of the craft table, we recommend you to attach 1×2 trims to both sides of the shelves, as described in the plans. Cut the trims at the right size, align them at both ends and secure them into place with 1 1/4″ finishing nails and waterproof glue.
Make sure there are no gaps between the trims, if you want to get the job done in a professional manner. In addition, we recommend you to smooth the exposed edges with sandpaper.
Set the sides of the table on a level surface, making sure you leave between them about 34″. Work with attention and make sure the shelf units are perfectly plumb.
The next step of the woodworking project is to attach the tabletop supports to the shelf units. In order to get the job done in a professional manner, we recommend you to cut the supports out of a piece of 1×12 lumber and to lock them into place with galvanized screws.
Add waterproof glue to enhance the rigidity of the structure. Although this step is not compulsory, it will most certainly add value to the woodworking project.
Attaching the tabletop to the wooden structure is a straight-forward process, as it doesn’t require complex techniques. We recommend you to cut the 3/4″ project panel at the right size and to attach it to the side shelves with screws.
After aligning the components at both ends, we recommend you to drill pilot holes through the supports and to insert 2″ screws into the tabletop. Add waterproof glue to the joints, in order to create rigid joints.
One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
Top Tip: In order to protect the lumber from water damage, we recommend you to cover the components with several coats of paint. Place the wooden table in a proper location and move it whenever necessary.
This woodworking project was about craft table plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.