Home Chicken Coop Chicken Coop Nesting Boxes Plans

Chicken Coop Nesting Boxes Plans

by Ovidiu

 

This step by step diy project is about diy chicken coop nesting boxes plans. This is PART 3 of the 4×8 chicken coop project, where I show you how to build the nesting boxes. If you want to create comfort for the chickens and have easily access to the eggs every morning, building the nesting boxes is a natural step. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

Chicken Coop Nesting Boxes Plans

Building chicken nesting boxes

Building chicken nesting boxes

 

Cut & Shopping Lists

  • A – 4 pieces of 2×2 lumber – 41″ long, 4 pieces – 16″ long, 4 pieces – 9″ long, 6 pieces – 15″ long FRAME
  • B – 2 pieces of T1-11 siding – 18″x19 3/4″ long, 1 piece – 18″x41″ long, 1 piece – 12 3/4″x42 1/4″ long WALLS
  • C – 1 piece of T1-11 siding – 20″x46 1/4″ long, 1 piece of 1×2 lumber – 46 1/4″ long LID

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

How to build chicken nesting boxes

Front-wall-frame

Front-wall-frame

The first step of the project is to build the wall frames for the chicken coop nesting boxes. As you can easily notice in the diagram, you need to cut the components from 2×2 lumber. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Align the edges with attention and make sure the corners are right-angled.

Back wall frame

Back wall frame

Continue the project by assembling the small frame for the chicken coop nesting boxes. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Make sure the corners are square and align the edges with attention.

Assembling-the-frame-of-the-coop-nest-box

Assembling-the-frame-of-the-coop-nest-box

After building the two frames, you need to assemble the nesting boxes by attaching the rest of the components. Cut the 2×2 components at the right dimensions and secure the to the frame with 2 1/2″ screws. You can use pocket screws or you can just drill pilot holes and insert the screws. Make sure the corners are right-angled when assembling the nesting boxes.

Attaching the bottom

Attaching the bottom

Attach the T1-11 to the bottom of the nesting boxes. Use nails or 1 1/4″ screws to secure the bottom panel to the frame for the nesting boxes.

Fitting the partitions

Fitting the partitions

Next, you need to attach the partitions to the nesting boxes. Cut the partitions at the right dimensions shown in the diagram and secure them to the frame of the box with screws or nails.

Building the side panels

Building the side panels

Build the side panels from T1-11 siding. Align the edges with attention and secure the panels to the frame of the box with nails or screws.

Fitting the back panel

Fitting the back panel

Attach the T1-11 panel to the back of the nesting box using nails or screws. Align the edges flush before locking the panel into place.

Fitting the nesting boxes

Fitting the nesting boxes

Fit the nesting boxes to the side of the chicken coop and align the edges flush. Drill pilot holes through the frame and insert 2 1/2″ screws every 6″ into the wall of the chicken coop.

Fitting the lid support

Fitting the lid support

Fit the 1×2 support for the lid to the top of the nesting boxes. Use 1 1/4″ brad nails to secure the support into place.

Attaching the lid

Attaching the lid

Attach the lid to the top of the nesting boxes and align the edges with attention. Use hinges to secure the lid into place tightly.

Nesting boxes plans

Nesting boxes plans

The nesting boxes are easily to access, so you can harvest the fresh eggs every morning. In addition, you can also clean the nesting boxes easily once a month or so.

How to build chicken nesting boxes

How to build chicken nesting boxes

You can install a handle to the lid of the chicken coop, so you can open and close it easily. In addition, you should consider installing a latch so you keep the chickens safe from the predators.

Small Chicken Coop Plans

Small Chicken Coop Plans

 

Make sure you check out PART 1 and PART 2 of the 4×8 chicken coop project, so you learn how to build the frame and the roof for the coop. In addition, I have many other chicken coop projects on the site, so don’t forget to check them out as well.

 

 

This woodworking project was about chicken coop nesting boxes plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Autumn -

In this plan, the side wall frame to which the nesting boxes attach is 41″ across. The nesting box dimensions are 41″ across. However, the plan also shows that there is 2″ on either side of the nesting box. Is there a mistake in the dimensions for the length of the nesting box (and then all the spacing inside it as well, if those are based on the 41″ measurement) ? There can’t be 2″ on either side if both the wall it is being attached to, and the nesting box itself is 41″. Or am I totally missing something?

Reply
Ovidiu -

The side wall to which is attached is 48″

Reply

Leave a Comment