Home Brags Wood Planter Bench

Wood Planter Bench

by Ovidiu

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to submit your projects built from our plans or based on your own ideas. Send the materials using this contact form. Thank you for sharing your projects!

 

 

Planter Bench

Seat-frame

First of all, I built the frame for the seat. I drill pilot holes through the side components and inserted screws. I added glue to the joints, as on the long run it strengthens them. I made sure the corners are square.

Seat-legs

I cut the legs out of 2×4 lumber and secure them to the frame tightly. I used a spirit level to check if the seat is horizontal and the legs are plumb.

Fitting-the-frame

I attached the seat frame to the planter, as shown in the diagram. I drilled pilot holes through the planter and inserted screws into the seat frame. I added glue and let it dry out for several hours. I attached the seat slats and locked them into place with galvanized screws. Last but not least I used sandpaper to smooth everything thoroughly.

Planter-bench

 

From Jack Sander

I made another planter box and attached the bench seat to it, as you can see in the images. I followed the plans and used the lumber I had from previous projects. I think the planter bench turned out pretty good and I can’t wait for my wife to plant some flowers. I applied a few coats of stain to enhance the look of the wood.

 

 

From Plans: http://myoutdoorplans.com/furniture/how-to-build-a-planter-bench/

Difficulty Level: medium

Time Required: 1 day

Total Cost: <25 $

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

JOHN/ PITTSBURGH -

I love your planter bench and hope you dont mind if i make 1 from your plans

Reply
Julian -

Serve yourself, John! Looking forward for the finished project…

Reply

Leave a Reply to Julian Cancel Reply