Home Brags Swing Pergola with 6×6 Posts – DIY Project

Swing Pergola with 6×6 Posts – DIY Project

by Ovidiu
written by Ovidiu

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor. We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

Swing Pergola with 6×6 Posts – DIY Project

DIY-2-Post-Swing-Frame

 

From Patrick,  

Cutting the notch on the vertical 6X6 posts is definitely a challenge, but not impossible. I did my best with a jig saw and a sawzall and cleaned it up with a chisel & sander. All in all, I’m very pleased with this project. Thanks for sharing your plans!

 

 

From Plans: https://myoutdoorplans.com/furniture/simple-swing-set-plans/

Difficulty Level: easy

Time Required: –

Total Cost: –

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Drill Press Stand – DIY Project

Farmhouse Twin Bed with Rails – DIY Project

Large Dog House – DIY Project

12×14 Gable Pavilion – DIY Project

12×16 Free Standing Pergola – DIY Project

6×16 Firewood Shed – DIY Project

12×16 Barn Shed – DIY Project

12×12 Gable Pavilion – DIY Project

12×16 Lean to Addition – DIY Project

10×12 Gable Shed with Porch – DIY Project

I've been a designer and a woodworker since I first developed consciousness.

1 comment

Ovidiu -

Looks brilliant. Love the joints and love the round swing.

Reply

Leave a Reply to Ovidiu Cancel Reply