DIY Farmhouse Table

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at [email protected] or using the contact form.



DIY Farmhouse Table



From Bryan A Klein,

The table is just 2x4s all around with the exception of 2x6s for the tip and breadboards. Legs are laminated 2x4s because I didn’t like the options for non-pressure-treated 4x4s and cedar didn’t match the rest of the piece. The top is fastened using pocket holes. I stained it with an oil stain and coated it with polyurethane. The lumber was quite cheap, and I already had the poly and screws, so I made it for just over $45. It took one day to build and several to stain and seal. It seats up to six. Full project HERE.



From Plans: original design

Difficulty Level: intermediate

Time Required: 2 days

Total Cost: 45 $


Leave a Reply

error: Content is protected !!