Home Brags DIY Basic Wood Guitar Stand

DIY Basic Wood Guitar Stand

by Ovidiu

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

I strongly encourage you to send me photos and your feedback regarding the projects on MyOutdoorPlans. Please send me the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY Basic Wood Guitar Stand

DIY-guitar-stand

 

From Derek,

I had a 2.5x .35 meter plank of pine left over from a project here in Mexico, so I decided to build a much-needed guitar stand to save space in my cluttered music room. The board cost me about US 6 dollars. The sandpaper, stain, and rubber that I glued on the stand to protect the guitars cost another 10 dollars. I cut all the wood and sanded the individual pieces on afternoon. The next day I assembled the pieces with wood screws and glue, and sanded it that evening. The next morning I stained it with an alcohol based rub stain from Comex. Then I glued the pieces of bathroom non slip rubber along the bottom boards and in the cuts where the guitar necks rest. It isn’t perfect, but it sure is functional. Also, it was fun and easy to build.

 

 

From Plans: http://myoutdoorplans.com/stand/wooden-guitar-stand-plans/

Difficulty Level: easy

Time Required: 1 day

Total Cost: $16

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment