DIY Basic Multi-Guitar Stand by Ovidiu written by Ovidiu 1.5K views 2 minutes read 1.5K Â This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor. I strongly encourage you to send me photos and your feedback regarding the projects on MyOutdoorPlans. Please send me the materials at admin@myoutdoorplans.com or using the contact form. DIY Basic Multi-Guitar Stand From Daniel Chang, I used treated Pine and spend about $8 in wood plus $2 or $3 in screws and a piece of leather (2 square feet) about $7 It took me about 8-10 h to complete the project. What took me most time was sanding at hand. From Plans: http://myoutdoorplans.com/stand/wooden-guitar-stand-plans/ Difficulty Level: easy Time Required: 1 day Total Cost: $18 Â - EXPLORE MORE IDEAS FOR - 0 comments 0 FacebookTwitterPinterestEmail You may also like DIY 12×16 Hip Roof Pavilion DIY Halloween Decoration DIY Wood Outhouse DIY Double Loveseat Bench with Table DIY 8×8 Lean to Shed DIY Large Run in Shed DIY Large Chicken Coop with Nesting Boxes DIY 12×16 Storage Shed DIY Insulated Cat House with Porch DIY Project – 6×12 Firewood Shed Ovidiu I've been a designer and a woodworker since I first developed consciousness. Leave a Comment Cancel Reply