Home Brags Building a Hammock – DIY Project

Building a Hammock – DIY Project

by Ovidiu

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor. We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

Building a Hammock – DIY Project

How-to-build-a-hammock-stand

 

From John, 

Built my own hammock stand from the plans using all 2×6’s and reinforcing both support ends by tripling up the boards. The single 2×6 on each end was fine when just laying in the hammock but any amount of swing or movement in the hammock caused the end supports to flex, causing some concern. Sandwiching the end supports with additional 2×6’s significantly reduced the flexing. Painted it in graphite black. Incredibly happy with the outcome. Knocked it out in under four hours.

 

 

From Plans: http://myoutdoorplans.com/furniture/hammock-stand-plans/

Difficulty Level: easy

Time Required: 4 hours

Total Cost:

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment