Home Arbor Swing Stand Plans

Swing Stand Plans

by Ovidiu

 

This step by step diy woodworking project is about swing stand plans. This detailed article features instructions and complete diagrams about building a sturdy arbor swing. Adjust the design of the simple gazebo to suit your needs and budget. This project requires basic tools and materials, so that any person with basic skills can get the job done in less than a week. See here how to build the swing bench.

Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from. Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs within the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. See all my Premium Plans HERE.

 

 

Projects made from these plans

Previous
  Add-image

 

 

Swing Stand Plans

Building a swing stand

Building a swing stand

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 120″ long POSTS
  • B – 2 pieces of 2×6 lumber – 120″ long BEAMS
  • C – 2 piece of 4×4 lumber – 25 1/2″ long BRACES
  • D – 4 pieces of 2×6 lumber – 12″ long SUPPORTS
  • E – 8 pieces of 4×4 lumber – 14 1/2″ long RAFTERS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

It’s that easy to build a porch swing stand – Video!

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a swing stand

Anchoring the post into concrete

Anchoring the post into concrete

There are several ways to lock the posts into place. Therefore, you could dig holes in the ground and set the posts into concrete, or you could use post anchors. Nevertheless, taking into account the height of the construction, we recommend you to lock the posts into concrete.

Level the posts with a spirit level and secure them temporarily with 2×4 braces. Make sure the top of the posts are at the same level, otherwise the structure of the carport won’t be sturdy enough.

Fitting the posts

Fitting the posts

Fit the opposite post and check if its top is the same level with the other post. Use a spirit level to make sure you get an accurate result.

Building the support beams

Building the support beams

Build the support beams out of 2×6 lumber. Cut the ends in a decorative manner, by using a circular saw. Smooth the edges with fine-grit sandpaper.

Fitting the support beams

Fitting the support beams

Clamp the beams to the top of the posts, making sure the edges are aligned. Drill pilot holes through the beams and through the posts. Insert 7″ carriage bolts to lock the components together.

Building the diagonal braces

Building the diagonal braces

Adding diagonal braces is a great idea, as it will provide extra-support to the construction. Cut both ends at 45 degrees and make a curved notch to the front side.

Fitting the diagonal braces

Fitting the diagonal braces

Fit the braces to the structure, as described in the diagram. Drill pilot holes and lock the braces to the structure by driving in 2 1/2″ screws.

Fitting the supports

Fitting the supports

Fit 4×4 supports between the support beams. You have to insert the eye screws into the supports, as to hang the swing bench to them. Cut one end of the supports at 45 degrees and secure them into place by inserting 2 1/2″ screws through the beams.

Building the rafters

Building the rafters

Build the rafters out of 4×4 lumber. Use a circular saw to make the notches to the components and remove the excess material with a chisel. Smooth the recess with fine-grit sandpaper.

Fitting the rafters

Fitting the rafters

Fit the 4×4 rafters to the support beams, making sure you place them as described in the diagram. Drill pilot holes through the components and insert 4 1/2″ screws into the support beams. The rafters will add strength to the wooden structure and keep the beams equally-spaced.

Swing stand plans

Swing stand plans

 

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the project and to protect the wooden garden swing stand from decay, we recommend you to cover the components with paint or stain.

 

 

This woodworking project was about swing stand plans free. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

5 comments

Rich -

Hi there, Is there a benefit to putting the post in the concrete or using an anchor?

Reply
Ovidiu -

I don’t recommend anchors for this project. The forces are too strong and you would need A shaped bracing.

Reply
Eric -

How deep do you recommend putting the posts into the ground? Based on the 88″ height in the diagram, I assume the other 32″ should be cemented into the ground? Thanks!

Reply
Ovidiu -

Yes, that’s correct.

Reply
Dennis -

Where are the swing hangers attached? The 2×6?

Reply

Leave a Reply to Dennis Cancel Reply