This step by step diy woodworking project is about how to build a dog bed. This detailed article features through plans for building a beautiful pet bed. Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from.
Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue to the joints, in order to enhance the rigidity of the structure.
Projects made from these plans
How to Build a Dog Bed
- A – 2 pieces of 3/4″ plywood – 9 1/2”x22 1/2″ long SIDES
- B – 1 piece of 3/4″ plywood – 9 1/2″x24″ long, 1 piece – 5 1/2″x24″” long FACES
- C – 2 pieces of 1×1 lumber – 9 1/2” long, 2 pieces – 13 1/2″ long CLEATS
- D – 1 piece of 3/4″ plywood – 22 1/2″x22 1/2″ long FLOOR
Check out this video tutorial! It’s that simple to build an outdoor swing!
Building a dog bed
The first step of the project is to build the front and the back face of the dog bed. As you can easily notice in the diagram, we recommend you to mark the cut lines on the 3/4″ plywood sheets and to get the job done with a circular saw. Smooth the cut edges with fine-grit sandpaper and remove the residues.
Cut the bottom part of the components in a professional and decorative manner, to get a nice appearance.
The next step of the woodworking project is to build the sides of the dog bed. As you can easily notice in the diagram, we recommend you to mark the cut lines on 3/4″ plywood sheets. Make the straight cuts with a circular saw and the curved cuts with a jigsaw.
Cut out the handles on both sides of the pet bed, in order to move it easily. Smooth all the exposed cut edges and remove the residues. Drill pocket holes at both ends and secure them to the perpendicular walls using 1 1/4″ screws.
Build the cleats out of 1×1 lumber and attach them to the interior faces of the structure. Drill pilot holes through the cleats and insert 1 1/4″ screws into the frame of the bed. Add glue to the joints and make sure the cleats are perfectly horizontal. Adjust the height at which you place the cleats to suit your needs.
Build the bottom of the dog bed out of 3/4″ plywood, after taking accurate measurements. Fit the component into place and secure it to the cleats using 1 1/4″ screws. Alternatively, you could drill pocket holes along the edges and insert screws into the frame of the bed.
One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
Top Tip: If you want to enhance the look of the woodworking project and to protect the pet bed from decay, we recommend you to cover the components with paint or stain. Fit a nice cushion to the bed frame.
This woodworking project was about how to build a dog bed. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.