Home 12x18 Free Run in Shed Plans

Free Run in Shed Plans

by Ovidiu

 

This step by step diy woodworking project is about 12×18 horse shelter plans. The project features instructions for building a a large run-in shed, that can accommodate up to three horses. If you want to build a basic shelter for your horses or for storing other items, take a look over this project, as well as over PART 2 of the article. Make sure you check out the rest of plans to see alternatives and more projects for your garden.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

It’s that simple to build a run in shed!

 

 

Free Run in Shed Plans

Building-a-run-in-shed

Building-a-run-in-shed

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 216″ long SKIDS
  • B – 2 pieces of 2×4 lumber – 144″ long, 10 pieces – 80 1/2″ long 2xSIDE WALL
  • C – 2 pieces of 2×4 lumber – 161″ long, 10 pieces – 80 1/2 long BACK WALL
  • D – 1 piece – 134 3/4″ long, 1 piece – 139″ long, 1 piece – 2 1/2″ long, 1 piece – 8 1/2″ long, 1 piece – 14 3/4″ long, 1 piece – 21″ long, 1 piece – 27″ long, 1 piece – 33″ long 2xTOP SIDE WALL
  • E – 1 piece of 2×10 lumber – 216″ long, 3 pieces of 2×6 lumber – 114″ long BEAMS
  • F – 4 pieces of T1-11 siding – 48″x84″ long, 1 piece – 24″x84″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a 12×18 run in shed

Building-the-side-walls

Building-the-side-walls

The first step of the project is to build the side walls for the run in shed. Use 2×4 lumber to build the components. Drill pilot oles through the plates and insert 2 1/2″ screws into the studs. Alternatively, you can use a framing gun. Make sure the edges are aligned and check if the corners are square.

Fitting the side walls

Fitting the side walls

Fit the side walls to the 4×4 skids. Use 2×4 temporary braces to lock the wall frames to the skids. Use 3 1/2″ screws to lock the walls to the skids. Make sure the walls are plumb, by using a spirit level.

Building-the-back-wall-frame

Building-the-back-wall-frame

Assemble the back wall, using the same techniques described above. Make sure you space the studs as shown in the plans.

Assembling the frame of the run in shed

Assembling the frame of the run in shed

Fit the back walls to the structure, as shown in the diagram. Align the edges with attention and make sure the corners are square. Drill pilot holes through the bottom plate and insert 2 1/2″ screws into the skids. In addition, lock the adjacent walls together using 2 1/2″ screws.

Building the top side walls

Building the top side walls

Build the top side walls from 2×4 lumber. Cut the components at the right dimensions, following the instructions from the plans. Cut the top of the studs at 75.5 degrees using a miter saw. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs.

Fitting the top side walls

Fitting the top side walls

Fit the top frames to the side walls, as shown in the plans. Align the edges with attention, drill pilot holes through the bottom plate of the lean to frames and insert 2 1/2″ screws into the support walls.

Fitting the top ridge

Fitting the top ridge

Next, attach the 2×10 beam to the front of the run in shed. Use a spirit level to check if the beam is perfectly horizontal. Use 3″ lag screws to lock the beam to the top frames.

Fitting the vertical front beams

Fitting the vertical front beams

Next, attach 2×6 beams to the front of the shed, as shown in the diagram. Use a spirit level to plumb the beams. In addition, check if the corners are square for a professional result.

Fitting the middle post braces

Fitting the middle post braces

Use pieces of 2×6 lumber to lock the middle support into place. Drill pilot holes and insert 3 1/2″ screws to lock the braces into place.

Attaching the back siding panels

Attaching the back siding panels

Attach T1-11 siding sheets to the back of the run in shed. Use 1 5/8″ screws/nails to lock the sheets to the framing, every 8″ along the studs and plates. Leave no gaps between the sheets.

12x18 Run in shed plans

12×18 Run in shed plans

Make sure you check out PART 2 of the project, to learn more about building the roof for the 12×18 shed.

Run in shed plans

Run in shed plans

Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-200 grit sandpaper and remove the residues with a damp cloth.

Top Tip: Check out the rest of the project, to learn how to build the roof for the run in shed.

 

 

This woodworking project was about 12×18 free run in shelter plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

35 comments

kelly -

I love the plans for the 12×18 run in shed. Is there a place to get more detailed plans?

Reply
Julian -

This is as detailed as you can get on MOP.

Reply
kelly -

Thanks Julian! I love the site.

Reply
Julie -

This is really awesome! Can someone tell me what tools I will need? Saws etc???

Reply
Julian -

You need: a circular saw/miter saw, a drill, a nailer (you could use a hammer as well or a screwdriver). Besides that you need the common hand tools: hammer, ruler, spirit level, carpentry square, gloves etc. See what tools I recommend here: http://myoutdoorplans.com/support/

Reply
Scott Hommel -

One note: The side walls will sag with no support beneath. I am adding some 4×4 support beneath these walls. I do not plan to move the structure so this will work for me. Another option is to support from beneath until the siding and kick boards are installed. This will firm everything up.

Reply
Julian -

Thank you for the feedback. Looking forwards to seeing your project!

Reply
Melissa -

We go to local guy for lumber and get the leftover pine slabs, remove the bark and use them for siding. The slabs I get for free!

Reply
Ovidiu -

Thank you for the tip!

Reply
Jennifer -

Hi I love these plans! Currently working on this shed. I pulled up your site to see the pictures and they are gone! Are you guys haveing trouble with your site? Please help

Reply
Ovidiu -

If the pics are gone? How can you still comment? Are you using your mobile/tablet or a computer? For me it works.

Reply
Dean -

Do you have recommendations on how to anchor the 12×18′ run-in shed to the ground?

Reply
Ovidiu - Reply
Mark -

I thought i saw plans for a 24″ but I can’t find them.

Reply
Susan -

Why would you use 4x4s as bottom plates, instead of using 4x4s as corner posts for support in ground with concrete?

Reply
Robin Allen -

HI is there a way to get the full supply list for the entire shed? Walls and roof? Or do i just get everything on the bottom part of the list for each plan A and B?

Reply
Ovidiu -

Yes, the list at the bottom of the plans is what you have to buy.

Reply
Sam -

How many lag screws do I need on either end of the 2×10 beam? Thanks.

Reply
Ovidiu -

At least 3.

Reply
Sam -

Thanks!

Reply
Ron -

What changes would you recommend if i use metal siding?

Reply
Ovidiu -

I’m not an expert when it comes to metal siding, so I can’t help you with that.

Reply
Ashley M Farris -

What foundation should I build for this plan ?

Reply
Karen Tandy -

I can’t figure out how to order plans.

Reply
Ovidiu -

All my plans are free. You can read how to get them here: http://myoutdoorplans.com/faq/

Reply
Deby -

We are building our shed with 4×4 posts cemented in the ground due to high wind area so we are putting 2×6 horizontal on the 4×4 posts…I’m not sure how to space them…guessing 24″??

Reply
Ovidiu -

16″ or 24″ on center

Reply
Tara -

It looks like the height of the 12 x 18 run in shed is about 114” (9.5’). If I want to make it taller would you recommend adding the additional height to the bottom portion (side walls) or when building the top slanted portion of the run in? Or does it matter? I want it about 2’ taller for my Clydesdale.
Thank you

Reply
Ovidiu -

I recommend you to build the side and back walls 2 ft taller. Just cut the studs 2 ft longer. In this way, you don’t change the slope of the roof and you can still follow my plans for the rafters and so on.

Reply
Phyllis Freeman -

I’m not able to print the plans. Is it not allowed? I really like the plan.
Thanks

Reply
Ovidiu -

The print function will be available again in a few days. I had issues with unethical use of my plans. That was very hurtful, since I worked 10 years to make all these plans available for free.

Reply
Kevin -

Thank you for your work ! These are great ~!

Reply
Patrick -

This shelter is perfect! However, the diagram shows materials labeled A thru K, but the materials list is A thru F. How do I get the true materials list. I’m trying to get the materials list correctly before going to the lumber yard.

Reply
Ovidiu -

K is for the kickboards, which are optional

Reply

Leave a Comment