Home 8x16 Shed with Porch Plans

Shed with Porch Plans

by Ovidiu

 

This step by step diy project is about shed with porch plans. I have designed this shed with a gable roof and with a generous side porch so you can shelter an ATV or a snowmobile, while having a generous storage area. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

 

 

Building a shed with porch

building-a-shed-with-porch

Building-a-shed-with-porch

 

Cut & Shopping Lists

  • A – 3 pieces of 4×4 lumber – 16′ long SKIDS
  • B – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 93″ long FLOOR FRAME
  • C – 3 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x48″ long FLOOR
  • D – 2 pieces of 2×4 lumber – 192″ long, 1 piece – 185″ long, 11 pieces – 81″ long 2xSIDE WALL
  • E – 2 piece of 2×4 lumber – 8 1/2″ long, 1 piece – 96″ long, 1 piece – 89″ long, 4 pieces – 81″ long, 2 pieces – 75 1/2″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 89″ long, 1 piece – 96″ long, 5 pieces – 81″ long BACK WALL
  • G – 12 pieces of T1-11 5/8″ siding – 48″x88″ long SIDING
  • H – 3 pieces of 6×6 lumber – 131 1/4″ long POSTS
  • I – 2 pieces of 2×6 lumber – 192″ long SUPPORT BEAMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Shed with Porch Plans

Assembling-the-floor-frame-shed

Assembling-the-floor-frame-shed

The first step of the shed with porch project is to build the floor. Cut the components from 2×6 lumber at the dimensions described in the diagram. Align the edges flush, making sure the corners are square. Drill pilot holes through the rim joists and insert 3 1/2″ screws to lock them together tightly.

fitting-the-skids

Fitting-the-skids

Attach the 4×4 skids to the bottom of the shed floor. Use screws or metal connectors to lock the skids to the floor joists. Align the edges with attention, making sure everything is locked together tightly.

fitting-the-plywood-sheets

Fitting-the-plywood-sheets

Attach the 3/4″ plywood sheets to the floor of the shed, making sure you leave no gaps between the sheets. Insert 1 5/8″ screws into the joists, every 8″.

Building-the-side-walls

Building-the-side-walls

Build the side walls from 2×4 lumber. Cut the components from 2×4 lumber, as shown in the diagram. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Alternatively, you can use 16d nails. Make sure the corners are square and check if the edges are aligned flush.

fitting-the-side-walls

Fitting-the-side-walls

Fit the side walls to the shed floor, aligning the edges with attention. Use a spirit level to plumb the walls with attention and then secure them into place with 3 1/2″ screws. Drill pilot holes through the plates and insert the screws into the floor.

Building-the-front-wall-frame

Building-the-front-wall-frame

Frame the front wall using the instructions from the above diagram. As you can easily notice in the plans, you need to leave enough room for the from double doors. You can adjust the size of the doors to suit your needs. You should notice you need to use 2×6 lumber for the top double header.

Building-the-back-wall

Building-the-back-wall

Frame the back wall for the porch with swing using the information from the diagram. Use the same techniques described above to assemble the wall properly.

assembling-the-shed-frame

Assembling-the-shed-frame

Fit the wall frames to the floor of the shed, aligning everything with attention and with great care. Lock the adjacent walls together with 3 1/2″ screws and then lock the walls to the floor through the bottom plates.

side-walls

Side-walls

Attach the 5/8″ T1-11 siding panels to the sides of the shed. Align the edges with attention and secure them into place with 4d nails. Leave no gaps between the sheets and then insert the nails, every 8″ along the studs and plates.

fitting-the-siding-panels-to-back

Fitting-the-siding-panels-to-back

Attach the siding panels to the back wall frame, as well.

front-siding-panels

Front-siding-panels

Make sure you make a few cuts for the panels that fit around the front opening. Take accurate measurements and use a circular saw to get the job done in a professional manner.

porch-support-posts

Porch-support-posts

Build the posts for the shed with porch from 6×6 lumber. As you can notice in the diagram, you need to make a few cuts to the top post, so you can fit the support beams.

fitting-the-porch-posts

Fitting-the-porch-posts

Lay out the location for the posts with string and batten boards. Make sure the diagonals are equal and then apply the 3-4-5 rule to each corner to make sure they are right-angled. Dig 3′ deep holes and then set the posts into place with temporarily braces. Use tube forms so you save concrete. Mix the concrete and then fill the tube forms. Let the concrete dry out for a few days, before installing the support beams.

fitting-the-roof-support-beamsfitting-the-roof-support-beams

Fitting-the-roof-support-beams

Align the 2×6 support beams to the top of the posts, making sure the corners are square. Drill pilot holes through the beams and through the posts and then insert 6″ carriage bolts. Insert 2 bolts through each post, so you can create super rigid joints.

shed-with-porch-plans-front-view

Shed-with-porch-plans-front-view

Make sure you check out PART 2 and PART 3 of the project, so you learn how to build the roof and then how to make the double shed doors and install the decorative trims. If you read attentively all my instructions, you can build this shed in a few weeks, with basic tools and basic woodworking skills.

shed-with-porch-plans-left-side-view

Shed-with-porch-plans-left-side-view

You can use the porch for sheltering an ATV or for a nice set of adirondack chairs.. Don’t forget to take a look over PART 2 and PART 3 to learn how to build the roof for the shed, as well as how to frame the double front doors.

 

 

This woodworking project was about shed with porch plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

4 comments

Lee Hawkins -

Very simply explained, and thank you for the plans. I do plan on changing it to, 12×16 and with the covered area. Thanks Lee

Reply
Julian -

That sounds great. Good luck and let me know how it comes out. I would love to see it, once you get it done.

Reply
Teresa Rogers -

We had a 27′ pool, with a 37×37 foot deck. I don’t think I want to put a pool back in there. What I want is a place to do art. A 27′ square room with windows all around. It sets about 4 1/2 feet above the ground. Do you think you could come up with exact plans and estimate cost to build it?

Reply
Julian -

Hi there! Unfortunately I don’t design plans for custom sizes, as that would serve only a niche audience. My mission is to create free plans so that I help as many people as I can. I hope you understand and I suggest you take a look over my large shed plans, for example, to see the basic techniques and maybe adjust them to your own needs: http://myoutdoorplans.com/shed/20×20-shed-plans/

Reply

Leave a Reply to Julian Cancel Reply