Home Shed Run In Shed Roof Plans

Run In Shed Roof Plans

by Ovidiu

 

This step by step diy project is about free run in shed roof plans. This is part 2 of the run in shed project, where I show you how to frame the roof and how to take care of the finishing touches. Don’t forget to check out PART 1 of the project to see how to build the frame of the shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Run In Shed Roof Plans

Building-a-10x20-lean-to-shed

Building-a-10×20-lean-to-shed

 

Cut & Shopping Lists

  • D – 2 pieces of T1-11 siding – 16 1/2″x48″ long, 2 pieces – 29 1/2″x48″ long, 2 pieces – 35 3/4″x24″ long END PANELS
  • E – 2 pieces of 2×4 lumber – 9 3/4″ long, 2 pieces – 22 3/4″ long SUPPORTS
  • G – 10 pieces of 2×6 lumber – 140″ long RAFTERS
  • H – 4 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 8″x48″ long, 2 pieces – 44″x96″ long, 1 piece – 8″x44″ long ROOF
  • J – 2 pieces of 2×6 lumber – 140″ long, 2 pieces of 1×6 lumber – 204 1/4″ long TRIMS
  • K – 250 sq ft of tar paper, 250 sq ft of asphalt shingles ROOFING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a run in shed roof

Building-the-rafters

Building-the-rafters

Build the rafters for the shed from 2×6 lumber. Mark the cut lines on the beams and then get the job done with a circular saw. Smooth the edges with sandpaper and repeat the process for the rest of the beams.

gable-end-supports

Gable-end-supports

Fit the rafters to the ends of the run in shed. Cut the supports for the lean to ends and secure them into place with screws, after drilling pilot holes.

fitting-the-gable-ends

Fitting-the-gable-ends

Cut the roof end panels from T1-11 5/8″ siding and lock them into place with 4d nails. Leave no gaps between the panels and align the edges flush.

Fitting-the-rafters

Fitting-the-rafters

Fit the rest of the rafters to the roof of the shed. Place the rafters every 24″ on center and lock them to the plates with metal hardware.

fitting-the-roofing-sheets

Fitting-the-roofing-sheets

Fit the 3/4″ plywood sheets to the roof of the run in shed. Align the edges flush, drill pilot holes and insert 1 5/8″ screws to secure them into place tightly. Leave no gaps between the sheets and make sure you insert the screws along the rafters, every 8″.

fitting-the-roof-trims

Fitting-the-roof-trims

Use 1×6 or 2×6 lumber for the front and back roof trims and 2×6 lumber for the side trims. Drill pilot holes and insert 2 1/2″ screws to secure the trims into place, after aligning the edges flush.

fitting-the-roofing

Fitting-the-roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under. Afterwards, attach the asphalt shingles to the roof, starting with the left bottom side of the roof. Read the manufacturer’s instructions to understand how to install the shingles into place properly.

10x20-shed

Shed

Seen from the back, the shed has a clean shape that can match the style of any backyard. If this project is too blunt for your tastes, then make sure you check out all my shed plans HERE.

10x20-run-in-shed

Run-in-shed

You need to fill the holes with putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to enhance the look of the shed. You can also make other adjustments to this design to suit your needs.

10x20-loafing-shed

Loafing-shed

This run in shed is ideal for storing your atv or snow mobile, or even a small trailer, as it has a nice large front opening for easy access. Check out part 1 of the project to learn more on how to build the frame for the shed.

 

 

This woodworking project was about run in shed roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Lorne janes -

Excellent site

Reply
Julian -

Thank you for the appreciation. Looking forward to seeing your diy projects!

Reply

Leave a Reply to Lorne janes Cancel Reply