Home 6x8 Portable 6×8 Saltbox Shed Plans

Portable 6×8 Saltbox Shed Plans

by Ovidiu

 

This step by step diy woodworking project is about 6×8 saltbox shed plans. The project features instructions for building a 6×8 shed that has a great look and it also comes with significant storage space. The 4×4 skids placed under the floor frame make moving it from one location to another. Check out PART 2 of the article to see how to frame the roof of the shed.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Read the local building codes before starting the project, as you might need a building permit. In addition, level the area and remove the vegetation layer. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

It’s that simple to build a saltbox shed!

 

 

Portable 6×8 Saltbox Shed Plans

Building-a-saltbox-shed

Building-a-saltbox-shed

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 96″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 96″ long, 7 pieces – 69″ long JOISTS
  • C -2 pieces of 3/4″ plywood – 48″x72″ long FLOOR
  • D – 2 pieces of 2×4 lumber – 65″ long, 4 pieces – 62″ long 2xSIDE WALL
  • E – 2 pieces of 2×4 lumber – 96″ long, 6 pieces – 62″ long BACK WALL
  • E – 4 pieces of 2×4 lumber – 32″ long, 1 piece – 96″ long, 4 pieces – 77″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 29″ long, 1 piece of 2×6 lumber – 96″ long TOP RIDGE
  • G – 2 pieces of T1-11 siding – 48″x84″ long, 4 pieces – 48″69 1/4″ long, 2 pieces – 24″x69 1/4″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a 6×8 saltbox shed

Building-the-floor-frame

Building-the-floor-frame

The first step of the project is to build the frame of the floor. Use 2×6 lumber for the joists. Align the edges with attention, drill pilot holes through the rim joists and insert 2 1/2″ screws into the perpendicular components.

Attaching the skids

Attaching the skids

Attach the 4×4 skids to the floor frame. Align the components and use metal connectors to lock them together tightly.

Attaching the flooring sheets

Attaching the flooring sheets

Attach the 3/4″ plywood sheets to the joists, as shown in the diagram. Leave no gaps between the sheets and secure them into place with 1 5/8″ screws, every 8″ along the joists.

Framing-the-back-wall-frame

Framing-the-back-wall-frame

Build the back wall from 2×4 lumber. Cut the components at the right dimensions and align the edges with attention. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Place the studs equally spaced.

Building-the-front-wall-frame

Building-the-front-wall-frame

Frame the front wall using the same techniques described above. Build a double header for the door from 2×4 beams.

Header

Header

Fit a piece of 1/2″ plywood from the header components to fill the gap.

Fitting the front and back walls

Fitting the front and back walls

Fit the front and the back walls to the floor of the shed. Use a spirit level to plumb the walls before securing them into place temporarily with 2×4 braces. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor of the shed.

Building-the-side-wall

Building-the-side-wall

Build the side walls from 2×4 lumber. Cut the components at the right dimensions and align the edges with attention. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs.

Assembling the frame of the shed

Assembling the frame of the shed

Fit the walls to the floor of the shed, as shown in the plans. Make sure the edges are flush. Make sure the corners are square and lock the adjacent walls together using 2 1/2″ screws.

Fitting the front wall

Fitting the front wall

Attach the 5/8″ T1-11 siding to the front of the shed. Mark the cut lines and get the job done with a circular saw, so that the sheets can fit around the door opening. Align the edges with attention and secure the sheets into place with 1 5/8″ nails.

Back wall

Back wall

Fit the sheets to the back of the shed, in the same manner described above.

Fitting the side walls

Fitting the side walls

Attach the siding sheets to the sides of the saltbox shed. Align the sheets to the top plates.

Fitting the top ridge

Fitting the top ridge

Fit the 2×4 supports to the top plates of the side walls. Use corner brackets to lock the supports to the side walls. Afterwards, attach the 2×6 top ridge into place. Use metal connectors to lock the beam into place. Make sure the supports are plumb and check if the corners are square.

Free saltbox shed plans

Free saltbox shed plans

Make sure you take a look over PART 2 of the project, to learn more about how to build the saltbox roof, as well as the front door.

6x8 shed plans

6×8 shed plans

The 6×8 shed seen from one side has a really nice and rustic appearance. All you have to do is select the right colors that match the style of your house.

Portable 6x8 Saltbox Shed Plans

Portable 6×8 Saltbox Shed Plans

Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-200 grit sandpaper and remove the residues with a damp cloth.

Top Tip: Check out the rest of the project, to learn how to build the roof for the stylish saltbox storage shed.

 

 

This woodworking project was about portable saltbox shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

james -

I really like this garden shed saltbox plan but
I could not figure out your back wall stud spacing.
96″ – 9″/ divide by 6, I believe is 14.5″ for the back wall stud spacing ?

Reply
Ovidiu -

Yes, you could place the studs every 16″ on center. In the diagram I show the studs placed equally spaced.

Reply

Leave a Reply to james Cancel Reply