Home 12x24 Loafing Shed Plans

Loafing Shed Plans

by Ovidiu

 

This step by step diy woodworking project is about loafing shed plans. The project features instructions for building a 12×24 run in shed. If you want to build a shelter for your cattle, this project is to obvious choice. The roof has a lean to shape, so that you keep the costs at minimum. Check out PART 2 of the article to see how to frame the roof of the shed. Make sure you check out the local building codes before starting the project.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Read the local building codes before starting the project, as you might need a building permit. In addition, level the area and remove the vegetation layer.

 

 

Projects made from these plans

Add-image

 

 

It’s that simple to build a loafing shed!

 

 

Loafing Shed Plans

Building-a-loafing-shed

Building-a-loafing-shed

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 144″ long, 10 pieces – 80 1/2″ long 2xSIDE WALL
  • B – 2 pieces of 4×4 lumber – 288″ long SKIDS
  • C – 2 pieces of 2×4 lumber – 281″ long, 13 pieces – 80 1/2″ long BACK WALL
  • D – 1 piece – 134 3/4″ long, 1 piece – 139″ long, 1 piece – 2 1/2″ long, 1 piece – 8 1/2″ long, 1 piece – 14 3/4″ long, 1 piece – 21″ long, 1 piece – 27″ long, 1 piece – 33″ long 2xTOP SIDE WALL
  • E – 4 pieces of 2×6 lumber – 114″ long, 1 piece of 2×10 lumber – 288″ long BEAMS
  • G – 12 pieces of T1-11 siding – 48″x84″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a 12×24 loafing shed

Building-the-back-wall-frame

Building-the-back-wall-frame

First of all you need to frame the walls for the cattle shed. Cut the components from 2×4 lumber at the dimensions indicated in the diagram. Align the edges with attention and make sure the corners are square. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Place the studs equally-spaced for a professional result.

Side-wall-frames

Side-wall-frames

Frame the side walls for the loafing shed, using the instructions from the diagram. Place the studs equally-spaced for a professional result.

Assembling the frame of the shed

Assembling the frame of the shed

Use 4×4 skids for the shed, placed at the front and back of the construction. In addition, you need to lock the side walls to the back frame, as shown in the diagram. Use 2 1/2″ screws to lock the adjacent walls together and double check if the corners are square before inserting the screws. Use a spirit level to make sure the walls are plumb. Drill pilot holes through the bottom plates and insert 2 1/2″ screws into the skids.

Fitting the side panels

Fitting the side panels

Attach T1-11 siding to the sides of the shed, as shown in the diagram. Leave no gaps between the panels and lock them to the framing, every 8″ with 1 5/8″ nails.

Fitting the panels to the back

Fitting the panels to the back

Attach the siding to the back wall, in the same manner described above.

Building the top side walls

Building the top side walls

Build the top side walls from 2×4 lumber. Cut the components at the right dimensions, following the instructions from the plans. Cut the top of the studs at 75.5 degrees using a miter saw. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs.

Fitting the top side walls

Fitting the top side walls

Fit the top frames to the side walls, as shown in the plans. Align the edges with attention, drill pilot holes through the bottom plate of the lean to frames and insert 2 1/2″ screws into the support walls.

Fitting-the-front-beams

Fitting-the-front-beams

Next, attach the 2×10 beam to the front of the run in shed. Use a spirit level to check if the beam is perfectly horizontal. Use 3″ lag screws to lock the beam to the top frames.

Next, attach 2×6 beams to the front of the shed, as shown in the diagram. Use a spirit level to plumb the beams. In addition, check if the corners are square for a professional result.

Fitting the front beam braces

Fitting the front beam braces

Use pieces of 2×6 lumber to lock the middle support into place. Drill pilot holes and insert 3 1/2″ screws to lock the braces into place.

12x24 Run In Shed

12×24 Run In Shed

Don’t forget to take a look over PART 2 of the project, to learn how to build the roof for the shed.

12x24 Cattle Shed Plans

12×24 Cattle Shed Plans

Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-200 grit sandpaper and remove the residues with a damp cloth.

Top Tip: Check out the rest of the project, to learn how to build the roof for loafing shed.

 

 

This woodworking project was about loafing shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

15 comments

Jonathan Celaya -

I think the video may be missing the framing for the side walls.

Reply
MIke -

Is there a way to connect 2 shorter 4×4 for your sled?

Reply
Ovidiu -

I don’t understand your question.

Reply
Bob Storey -

I am trying to do a 12×24 run in shed for horses. Is there a structural issue if I use this plan but, instead of dividing the 24′ with 2, 2×6 (6′ apart), i change it to a 2×8 centered at 12′. this would create two stalls of 12×12.

secondly, how are you creating 2x10s at that length? the plans chow a single beam, but, I’m not finding any length over 16′ in my stores.

Reply
Ovidiu -

The problem is not with the center supports. The problem is with the horizontal top beam. That hold all the roof weight, so it needs appropriate support. If you want to use one center support, you need to get an engineered beam. You should custom order beams at that sizes. You just need to ask around at the local lumberyards.

Reply
Bob Storey -

Your plan calls for a 2x10x24′. I am not finding any lumber provider in my area that can provide a 2x10x24 without special ordering.

When you say an engineered beam, are you talking about an LVL beam?

Reply
Ovidiu -

Yes. That would work. For every foot of span you need an inch of depth. So you should get one at least 12″.

Reply
Tracey -

Any idea what a rough cost estimate would be on this size?

Reply
Ovidiu -

I don’t have a cost estimate, but you have the materials list to add up the costs.

Reply
Jeff -

Would this good be good enough for a Midwestern snow load?

Reply
Scott -

Do you host the sketchup plans anywhere?

Reply
Ovidiu -

No

Reply
Nick -

For a 24 foot loafing shed – do you think 4 x 4 are available in 24 ft lengths?

Reply
Mark -

Not finding a way to download the PDF plans for this shed

Reply
Ovidiu -

Please read the FAQs It’s in the top menu

Reply

Leave a Reply to Jeff Cancel Reply