Home Shed Large Generator Shed Roof Plans

Large Generator Shed Roof Plans

by Ovidiu

 

This step by step diy project is about portable generator enclosure roof and door plans. This is PART 2 of the 5’x7′ shed project. In this article I show you how to build the front double doors and how to build the top lids. In this manner, you can have an easy access to the generator shed from the top and front the front. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Large Generator Shed Roof Plans

Building--a generator-shed

Building–a generator-shed

 

Cut & Shopping Lists

  • F – 2 pieces of T1-11 sifing – 36″x74 1/4″ long, 2 pieces – 24″x80 3/4″ long SIDE WALLS
  • G – 5 pieces of 2×4 lumber – 70 1/2″ long, 4 pieces – 39 3/4″ long, 2 pieces of 1×4 lumber – 88 1/2″ long RAFTERS
  • H – 2 pieces of 2×2 lumber – 69″ long, 2 pieces – 44 1/4″ long 2xLID
  • I – 2 pieces of 3/4″ plywood – 44 1/4″x72″ long ROOF
  • J – 50 sq ft of tar paper, 50 sq ft of asphalt shingles ROOFING
  • K – 1 piece of T1-11 siding – 36″x57 1/2″ long, 2 pieces of 1×4 lumber – 36″ long, 2 pieces – 50 1/2″ long 2xDOOR
  • L – 1 piece of 1×4 lumber – 78 3/4″ long, 2 pieces – 57 1/2″ long JAMBS
  • M – 2 pieces of 1×4 lumber – 60 3/4″ long, 2 pieces – 61 3/4″ long, 4 pieces – 77 1/4″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a portable generator shed roof

Building-the-rafters

Building-the-rafters

The first step of the roof project is to build the rafters for. Mark the cut lines on the 2×4 slats and get the job done with a circular saw. Smooth the edges with a sandpaper for a professional result.

Fitting the rafters

Fitting the rafters

Fit the rafters to the top of the generator shed. Drill pilot holes and secure the rafters to the top plates of the shed using 2 1/2″ screws. Space the rafters equally for a professional result.

Fitting the side panels

Fitting the side panels

Attach the T1-11 siding panels to the side walls. Cut the panels at the right dimensions and shape and secure it to the framing using 8d nails. Leave no gaps between the panels for a neat result.

Side roof trims

Side roof trims

Fit 2×4 trims to the sides of the generator shed, as shown in the plans. Align the edges flush and secure them into place with 2 1/2″ screws.

Fitting the shed trims

Fitting the shed trims

Fit 1×4 trims for the side and front of the generator shed. As you can easily notice in the diagrams, you need to cut the top of the side trims at 75 degrees. Smooth the edges with sandpaper for a neat result.

Back trims

Back trims

Fit the 1×4 trims to the back of the generator shed, as shown in the diagram. Use 1 1/2″ brad nails to secure the trims into place, after aligning the edges flush.

Door jambs

Door jambs

Fit the 1×4 door jambs around the front opening. Align the edges with attention and secure the trims into place with 1 1/2″ brad nails.

Fitting the roof trims

Fitting the roof trims

Fit 1×4 trims to the front and back of the roof, as shown in the image. Align the edges and secure them to the ends of the rafters using 1 1/2″ brad nails.

Fitting the roof lid supports

Fitting the roof lid supports

Fit 2×4 supports to the roof, as shown in the image. Drill pilot holes and secure the supports to the rafters with 2 1/2″ screws.

Roof-frame-for-lid

Roof-frame-for-lid

Build the frames for the two sections of the roof using 2×2 lumber. Drill pilot holes through the 44 1/4″ long components and insert 2 1/2″ screws to lock them together, after making sure the corners are right angled.

Roof panel

Roof panel

Fit 3/4″ plywood panels to the frames, as shown in the diagram. Drill pilot holes and insert 1 5/8″ screws to lock the panels into place. Leave no gaps between the frames and the plywood panels for a professional result.

Alternatively, you can build the two lids as one large frame, if you want to avoid complications. Therefore, drill pilot holes and insert 2 1/2″ screws to lock the two frames together.

Attaching the roof

Attaching the roof

Fit the lids to the roof of the generator shed, aligning the edges flush. Use hinges to secure the lids to the rafters, as shown in the image.

Fitting the roofing

Fitting the roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under. Install the asphalt shingles to the roof lids.

Building the doors

Building the doors

Build the double door panels from the T1-11 left over from the previous steps. Use 1×4 lumber for the frame of the doors. Use 1 1/4″ nails and glue to assemble the doors.

Attaching the front doors

Attaching the front doors

Fit the doors to the front opening and secure them to the jambs using 1 1/4″ screws. Use two hinges for each door and one latch to keep them shut.

Portable generator enclosure plans

Portable generator enclosure plans

One of the last steps of the project is to apply a few coats of paint over the trims and over the exterior siding. If you choose the right color scheme, you can add value to the project and enhance the look of your backyard.

Portable generator shed plans

Portable generator shed plans

As you can easily notice, this 5’x7′ shed is roomy enough for almost any portable generator. In addition, with little modifications, you can use these plans to store tools or other items. You have easy access to the interior of the shed using the lids and the front double doors.

 

 

This woodworking project was about portable generator enclosure roof and door plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment