Home Shed Firewood Stand Roof Plans

Firewood Stand Roof Plans

by Ovidiu

 

This step by step diy woodworking project is about wood stand roof plans. This is PART 2 of the firewood stand project, where I show you how to build the roof for the structure. The gable roof will protect the firewood from the elements. Make sure you check out the rest of plans to see alternatives and more projects for your garden.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Firewood Stand Roof Plans

Building-a-firewood-stand

Building-a-firewood-stand

 

Cut & Shopping Lists

  • D – 3 pieces of 4×4 lumber – 32″ long, 1 piece of 2×4 lumber – 96″ long RIDGE BEAM
  • E – 10 pieces of 2×4 lumber – 24″ long RAFTERS
  • F – 3 piece of 2×4 lumber – 43″ long SUPPORTS
  • G – 2 pieces of 2×6 lumber – 96″ long SUPPORTS
  • H – 2 pieces of 3/4″ plywood – 24″x96″ long ROOF
  • I – 40 sq ft of tar paper, 40 sq ft of asphalt shingles ROOFING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets my latest plans and for some other exclusive content. Also, follow me on Pinterest and Instagram to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support ME with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a firewood stand roof

Top ridge support

Top ridge support

The first step of the project is to build the supports for the top ridge. Therefore, you need to make 1 1/2″ deep cuts inside the marked area and then remove the excess with a chisel. Smooth the surface with 120-220 grit sandpaper and then repeat the process for the rest of the posts.

Top ridge supports

Top ridge supports

Center the posts to the top frame of the firewood stand and then plumb them vertically with a spirit level. Drill pilot holes through the frame and insert 3 1/2″ screws into the posts.

Roof-supports

Roof-supports

Fit the 2×4 supports to the notches. Center the supports into place and then secure them into place with 2 1/2″ screws. Make sure the corners are square.

Rafter supports

Rafter supports

Fit the 2×6 supports to the 2×4 braces. Align the edges flush, drill pilot holes and insert 2 1/2″ screws.

Building-the-rafters---wood-stand

Building-the-rafters—wood-stand

Build the rafters from 2×4 lumber. Make the angle cuts to both ends of the rafters and then make the small notches, so you can fit them into place tightly.

Fitting the rafters

Fitting the rafters

Fit the rafters to the top of the firewood stand. Place the rafters equally spaced and align the edges flush. Drill pilot holes and insert 2 1/2″ screws to lock the rafters into place tightly.

Roof sheets

Roof sheets

Fit the 3/4″ plywood sheets to the top of the firewood stand. Align the edges flush, drill pilot holes and insert 1 5/8″ screws, every 8″ along the rafters.

Fitting the roofing

Fitting the roofing

Fit tar paper to the roof of the firewood stand and then install the asphalt shingles. Alternatively, you can use plastic sheets to waterproof the roof and the protect the firewood from the elements.

Firewood Stand Plans - Front view

Firewood Stand Plans – Front view

Last but not least, you need to take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain over the components to enhance the look of the project and to protect the components from the elements.

Build a firewood stand with roof

Build a firewood stand with roof

If you want to keep your firewood dried and to add character to your backyard, building this stand is the best option. This stand is an intermediary step to a full size firewood shed. The main advantage is that it is a lot easier to build and that it keeps the costs down.

Top Tip: Check out the rest of the project, to see how we build the frame for this shed.

 

 

This woodworking project was about firewood stand roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment