Firewood Shed made from 2×4 lumber Plans

This step by step diy project is about firewood shed made from 2×4 lumber plans. I have designed this firewood storage shed, so you can build it entirely with 2x4s. This is a 4’x8′ shed with a gable roof, so you can store a lot of firewood inside. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

DIY 2x4 Firewood Shed

 

Firewood Shed made from 2×4 lumber Plans

Building-a-firewood-shed-from-2x4s

Cut & Shopping Lists

• A – 2 pieces of 2×4 lumber – 96″ long, 7 pieces – 45″ long FLOOR FRAME
• B – 11 pieces of 2×4 lumber – 96″ long DECKING
• C – 2 pieces of 2×4 lumber – 12 1/2″ long, 1 piece – 89″ long, 2 pieces – 65 1/2″ long FRONT WALL
• D – 2 pieces of 2×4 lumber – 89″ long, 5 pieces – 69″ long BACK WALL
• E – 2 pieces of 2×4 lumber – 48″ long, 4 pieces – 69″ long 2xSIDE WALL 
• F – 12 pieces of 2×4 lumber – 96″ long, 11 pieces – 48″ long, 20 pieces – 16″ long WALL SLATS

• 52 pieces of 2×4 lumber – 8′
• 6 cider blocks
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 6d nails, 16d nails
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Firewood Shed Plans
• 4×8 Wood Storage Shed Plans
• All Firewood Shed Plans

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

How to build a 2×4 wood shed

Floor-frame-2×4-shed

First of all, build the floor frame for the storage firewood shed. Therefore, cut the joists for the shed from 2×4 lumber, at the dimensions shown in the plans. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular beams. Place the joists every 16″ on center, making sure the corners are square and the edges are flush.

Fitting the concrete blocks

Choose the location for the wood shed and level it up thoroughly. It can be next to the property line or to one side of your backyard, to save space. Fit cider blocks under the floor frame so you can keep the firewood protected from moisture and to support their weight properly.

Fitting the floor slats

Fit the 2×4 decking to the floor of the shed. Make sure you place 3/4″ block of woods between the slats so you create even gaps. Align the edges flush, drill pilot holes and insert 2 1/2″ screws, so you secure the slats into place tightly.

Side-wall-frames—2×4-wood-shed

The next step of the project is to build the side walls for the firewood shed. Cut the components at the dimensions shown in the diagram and then assemble the side walls. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs.

Front-wall-frame

Next, you need to frame the front wall for the wood shed. You can adjust the size of the front opening to suit your needs.

Back-wall-frame—2×4-wood-shed

Build the back wall frame for the firewood shed in the same manner described above.

Assembling the shed frame

After assembling the wall frames you need to fit them to the floor of the shed. Align the edges flush and make sure the walls frames are plumb. In addition, check if the corners are square. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. In addition, join the adjacent walls with 2 1/2″ screws.

Fitting the front wall header

Fit the 2×4 double header to the top plate of the front wall. Build the header from 2 pieces of 2×4 lumber and a piece of 1/2″ plywood in between.

Fitting the slats to the front wall

Fit the 2×4 slats to the front of the shed frame. Align the edges with attention and then secure them to the framing with 2 1/2″ screws. You can adjust the distance between the slats to suit your needs.

Side wall slats

Fit the 2×4 slats to the sides of the firewood shed, as well.

Back wall wall slats

Last but not least, attach the 2×4 slats to the back of the shed, as well.

Firewood Shed made from 2x4s Plans

This firewood shed features a large opening for easy access to the interior.

2×4 Firewood Shed Plans

This 2×4 wood shed is ideal for any homeowner, as it will shelter the firewood from the weather, while adding a touch of rustic charm to your backyard. Make sure you will check PART 2 of the project, where I show you how to build the gable roof.

This woodworking project was about 2×4 wood shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

EXPLORE MORE IDEAS FOR: