Home 8x16 8×16 Shed Plans

8×16 Shed Plans

by Ovidiu

 

This step by step diy project is about 8×16 shed plans. I have designed this shed with a lean to roof and with a generous front double door, so you can shelter a lot of items inside. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

 

 

Building a 8×16 lean to shed

Building-a-8x16-lean-to-shed

Building-a-8×16-lean-to-shed

 

Cut & Shopping Lists

  • A – 3 pieces of 4×4 lumber – 16′ long SKIDS
  • B – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 93″ long FLOOR FRAME
  • C – 3 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x48″ long FLOOR
  • D – 1 pieces of 2×4 lumber – 192″ long, 1 piece – 185″ long, 2 pieces – 60″ long, 10 pieces – 81″ long, 2 pieces – 75 1/2″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
  • E – 2 piece of 2×4 lumber – 89″ long, 1 piece – 96″ long, 5 pieces of 1×4 lumber – 81″ long 2xSIDE WALL
  • F – 2 pieces of 2×4 lumber – 192″ long, 1 piece – 185″ long, 11 pieces – 81″ long BACK WALL
  • G – 12 pieces of T1-11 5/8″ siding – 48″x88″ long, 4 pieces – 24″x48″ long SIDING
  • H – 2 pieces of 2×4 lumber – 192″ long, 9 pieces – 21 1/4″ long TOP FRAME

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

8×16 Shed Plans

Assembling-the-floor-frame-shed

Assembling-the-floor-frame-shed

The first step of the project is to build the floor for the 8×16 shed. Cut the joists from 2×6 lumber and assemble the floor frame with 3 1/2″ screws. Make sure the corners are square and then fit the joists, every 16″ on center.

fitting-the-skids

Fitting-the-skids

Fit the 4×4 skids to the bottom of the frame, using metal connectors or by inserting screws, after drilling pilot holes.

fitting-the-plywood-sheets

Fitting-the-plywood-sheets

Attach the 3/4″ plywood sheets to the floor of the shed. Make sure you leave no gaps between the components for a neat result. Insert 1 5/8″ screws through the plywood sheets into the joists, every 8″.

Building-the-side-wall-frame

Building-the-side-wall-frame

Assemble the wall frames for the shed from 2×4 lumber. Drill pilot holes through the top and bottom plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ or 16″ on center.

Building-the-front-wall

Building-the-front-wall

Assemble the front wall, making sure you leave enough space for the door opening. You can adjust the size of the door to suit your needs. Make sure you use 2×6 lumber for the double header and 2×4 lumber for the king studs.

Building-the-back-wall-frame

Building-the-back-wall-frame

Assemble the side walls using the same instructions described above, but make sure you use the information from the diagram.

assembling-the-8x16-shed-frame

Assembling-the-8×16-shed-frame

Fit the wall frames to the floor of the shed. Align the edges with attention and use a spirit level to make sure they are plumb. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. In addition, lock the adjacent walls together using screws, after making sure the corners are square.

fiting-the-siding-panels-to-the-back-of-the-shed

Fitting-the-siding-panels-to-the-back-of-the-shed

Attach T1-11 siding to the back wall. Align the edges with attention and then secure the sheets into place with 4d nails, every 8″ along the framing.

fitting-the-siding-panels-to-back

Fitting-the-siding-panels-to-back

Attach the siding panels to the sides of the shed, as well. Align the edges with attention and then insert 4d nails to lock the sheets into place tightly.

fitting-the-siding-panels-to-the-front-of-the-shed

Fitting-the-siding-panels-to-the-front-of-the-shed

Fit the siding panels to the front of the lean to shed, as well. Cut out the sheets that go around the door opening, for a professional result.

building-the-front-top-wall

Building-the-front-top-wall

Build the top frame for the front of the shed, using the instructions from the above diagram. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and align the edges flush.

front-top-wall

Front-top-wall

Fit the top wall to the front of the shed, as shown in the plans. Align the edges flush and make sure the corners are square. Drill pilot holes through the bottom plates and insert 2 1/2″ screws into the shed front wall.

fitting-the-top-front-panels

Fitting-the-top-front-panels

Attach the siding panels to the top of the shed, as well.

8x16-shed-plans

8×16-shed-plans

Make sure you check out PART 2 and PART 3 of the lean to shed project, so you learn how to build the roof and the double doors for the shed. In addition, I will show you how to install the trims to the shed, so you enhance its look.

8x16-shed-plans-front-view

8×16-shed-plans-front-view

This shed is roomy enough for lots of items, so if you are looking for a cheap and straight-forward way of keeping your things protected from the elements, this shed is one good choice. Don’t forget to take a look over PART 2 and PART 3 to learn how to build the roof for the shed, as well as how to frame the double front doors.

 

 

This woodworking project was about 8×16 shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

16 comments

Darryl -

How do i get printable drawings for this project?

Reply
Ovidiu -

Please read the FAQs: http://myoutdoorplans.com/faq/

Reply
Kasey McCalmon -

What are the 6x6x12s for? Never saw them in the instructions!

Reply
Ovidiu -

They are for the skids, under the floor frame.

Reply
billy matheson -

If the joists are 93″ and the side lengths are made from 2 x 6…then total width is 97″ . How does this work with 96″ 3/4 OSB flooring?

Reply
Ovidiu -

2×6 lumber is actually 1 1/2″ x 5 1/2″ See this table for further reference: http://myoutdoorplans.com/imperial-to-metric-conversion/

Reply
billy matheson -

Thanks a lot for the reply…makes it clear now. Many thanks. Billy

Reply
Apple R -

I have a question about the 6x6x12

Is there another option for this? This size is not available in my area, so was wondering what else I could do. Would 6x6x8 or 6x6x10 work?

Thank you.

Reply
Ovidiu -

You don’t need the 6x6s for this project. It was a typing error. I have updated the materials list.

Reply
Nat -

Hi

Is there a good reason not to make the walls 8 inches taller? Then I could use full sheets of wall boards, and gain extra height inside and in the door.

Thanks 🙂

Reply
Ovidiu -

Yes, local codes. Some don’t allow you to make the walls 8′ high.

Reply
Greg -

I used these plans to make an 8 x 16’ lean shed, with modifications for two windows and a French door. I found the plans extremely useful and used the material list for lumber yard runs. I found it helpful to purchase materials for one aspect at a time, using my small Ford Ranger to pick up the materials. For example, I first bought the foundation/flooring materials and constructed them. I then bought the material for the walls including the siding; then the roof supports and sheeting; and lastly the shingles and flashing. The shed is in our back yard which is not accessible by vehicle, so I had to carry everything to the back from the driveway. Using just in time delivery helped me operate in a confined area. Thanks so much for these plans!

Reply
Mel -

Does this require the skids, I was thinking of laying it out on a compressed gravel or rock bed without the skids.

Reply
Ovidiu -

The skids are needed, unless you attach the walls to a concrete slab

Reply
KevMo -

Hello – curious why the plywood on the floor was laid out that way versus 4 whole pieces next to each other with T&G? Would this be a stronger design with this type of joint stagger versus just three joints 8′ long.

Reply
Ovidiu -

Because that’s the standard to add rigidity to the floor frame.

Reply

Leave a Reply to Kasey McCalmon Cancel Reply