3×6 Lean to Shed Plans

Jack 0 FavoriteLoadingAdd to favorites List YOUR FAVORITES GapDice RANDOM PLAN

This step by step diy project is about diy 3×6 lean to shed shed plans. This small storage shed is ideal for narrow spaced. Moreover, although it is not a large shed, this project will store most of your garden tools. Moreover, I have designed shed with many sizes so check them out, as well. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

 

 

Projects made from these plans

Add-image

 

 

3×6 Lean to Shed Plans

Building a 3x6 lean to shed

Building a 3×6 lean to shed

 

  • A – 2 pieces of 4×4 lumber – 72″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 72″ long, 6 pieces – 33″long FLOOR
  • C – 1 piece of 3/4″ plywood – 36″x72″ long FLOORING
  • D – 2 pieces of 2×4 lumber – 29″ long, 3 pieces – 74″ long 2xSIDE WALL
  • E – 1 piece of 2×4 lumber – 72″ long, 2 pieces – 20″ long, 6 pieces – 74″ long, 2 pieces – 68 1/2″ long, 2 pieces of 2×6 lumber – 35″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 72″ long, 6 pieces – 81″ long BACK WALL
  • G – 1 piece of T1-11 – 48″x85″ long, 1 piece – 24″x85″ long, 1 piece – 48″x78″ long, 1 piece – 24″x78″ long SIDING

 One day

 

 

How to build a 3×6 garden shed

Building the floor frame

Building the floor frame

The first step of the project is to build the floor frame for the shed. Lay the joists on a level surface and lock the joists together with screws. Cut all the joists from 2×6 lumber. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Make sure the corners are square and align the edges flush.

Fitting the skids

Fitting the skids

Select the location for the lean to shed. An existing building or the property line are great choices, as this will save you a lot of space. Level the surface and then compact a layer of gravel. The gravel will prevent the moisture from rotting the lumber. Lay the 4×4 skids and then fit the floor frame. Toenail the frame to the skids, after aligning the edges with attention.

Fitting the floor frame

Fitting the floor frame

Use 3/4″ plywood for the floor of the shed. Cut the sheet at the right dimensions and then lay it to the floor. Align the edges flush, drill pilot holes and insert 1 5/8″ screws into the joists, every 8″. Leave no gaps between the components for a professional result.

Front wall

Front wall

Build the front wall from 2×4 lumber using the information from the diagram. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. As you can see, you need to double the studs placed at both ends of the wall. Fit 1/2″ plywood between the double studs so you enhance the rigidity of the structure.

Use 2×6 lumber for the double header. Fit 1/2″ plywood between the double headers and sandwich everything together with 2 1/2″ screws.

Back wall

Back wall

Build the back wall for the 3×6 shed from 2×4 lumber. Cut the studs and the plates from 2×4 lumber and then lay them on a level surface. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center, as shown in the diagram. Align the edges flush and make sure the corners are square.

Side walls

Side walls

Frame the side walls for the 3×6 storage shed from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs.

Assembling the shed frame

Assembling the shed frame

After assembling the four side walls, you need to fit them to the floor of the shed. Use a spirit level to plumb the walls and then align the edges flush. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor of the shed. Make sure the corners are square and lock the adjacent walls together with 3 1/2″ screws.

Front wall siding

Front wall siding

Use T1-11 siding for the exterior walls of the shed. Cut the sheets to the right shape and size, using the information from the diagram. Align the edges with attention, making sure the sheets are flush with the top plates. Use 6-8d nails to secure the panels to the framing, every 8″. Leave no gaps between the sheets for a professional result.

Back wall siding

Back wall siding

Fit the T1-11 siding panels to the back of the shed, as well. Align the edges with attention and insert 6-8d nails to lock the siding panels into place tightly.

3x6 Shed Plans

3×6 Shed Plans

You need to take a look over PART 2 of the shed project, where I show you how to build the roof. This lean to shed is ideal if you want a small shelter for your garden tools. You can adjust the size of the door, to suit your own needs.

3x6 Lean to shed plans

3×6 Lean to shed plans

Make sure you check out the rest of the project, so you learn how to frame the roof and how to attach the door and the trims to the shed. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.

 

 

This woodworking project was about 3×6 lean to shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 












Top-Bar
Kids                Garden                Animals                 Planter

Car                Indoor               Furniture               Shed




Your-comment