Home Shed 24×24 Shed Door Plans

24×24 Shed Door Plans

by Ovidiu

 

This step by step diy project is about 24×24 shed doors plans. This is PART 3 of the large gable shed project, where I show you everything you want to know about framing the side door and fitting the trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

Building-a-24x24-shed-gable-roof

Building-a-24×24-shed-gable-roof

 

Cut & Shopping Lists

  • L – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 40″ long JAMBS
  • L – 2 pieces of 1×4 lumber – 46″ long, 2 pieces – 31″ long TRIMS
  • N – 2 pieces of 2×4 lumber – 73″ long, 2 pieces – 33″ long, 1 piece – 26″ long, 1 piece of T1-11 siding – 33″x80″ long DOOR

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets the latest plans and for some other exclusive content. Also, follow me on Pinterest and Instagram to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a shed door

Fitting-the-jambs

Fitting-the-jambs

Fit 2×4 jambs around the door opening. Align the edges flush and insert 2 1/2″ screws to lock the jambs into place tightly.

Building-the-side-shed-door

Building-the-side-shed-door

Build the side door from 2×4 lumber and T1-11 siding. First build the door frame using pocket screws. Align the trims flush with the door panels and secure them together with glue and 2″ nails.  Alternatively you could buy a door and fit it to the opening. However, I strongly recommend you to buy the door before starting the project, so you can adjust the opening to suit your needs.

Fitting the side door

Fitting the side door

Fit the door into place and secure it to the jambs with hinges. Install a latch so you can keep the door locked tightly into place.

Window trims

Window trims

Fit the window to the opening and then install the 1×4 trims. Use 2″ nails to secure the trims into place tightly.

24x24 shed plans

24×24 shed plans

You need to check out PART 1 and PART 2 of the shed, so you learn how to build the frame and the roof for the large outdoor gable shed. Moreover, I strongly recommend you to check out the rest of the shed projects that I have on the blog.

 

 

This woodworking project was about 24×24 shed door and trims plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment