Home Shed 16×20 Double Shed Door Plans

16×20 Double Shed Door Plans

by Ovidiu

 

This step by step diy project is about 16×20 gable shed doors plans. This is PART 3 of the large shed project, where I show you how to frame the double doors and how to install the trims to the four sides. If you haven’t done it yet, check out PART 1 and 2 of the project for detailed instructions of how to build the floor, the walls and the roof for this shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

16×20 Double Shed Door Plans

Building-a-16x20-shed

Building-a-16×20-shed

 

Cut & Shopping Lists

  • M – 4 pieces of 1×4 lumber – 94″ long, 2 pieces – 192″ long TRIMS
  • N – 2 pieces of 2×4 lumber – 87 1/2″ long, 1 pieces – 79″ long JAMBS
  • O – 1 piece of T1-11 siding – 36″x77 1/2″ long, 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long 2xDOOR

  • 12 pieces of 1×4 lumber – 8′
  • 2 pieces of T1-11 siding – 4’x8′
  • 10 pieces of 2×4 lumber – 8′
  • 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
  • 4d nails, 16d nails, 6d nails
  • shed hinges & latch
  • wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build double doors for the 16×20 shed

Fitting-the-door-jambs

Fitting-the-door-jambs

Fit the 2×4 trims around the door opening. Cut the jambs at the right dimensions and then attach them around the opening, making sure the edges are flush. Drill pilot holes and insert 2 1/2″ screws for a professional result.

Building-the-door

Building-the-door

Use the panels that you have cut out in the previous steps for the double doors. Build the trims from 2×4 lumber. Lay the components on a level surface and then make sure the edges are flush. Use 1 5/8″ screws to lock the siding panels to the trims.

Fitting the double doors

Fitting the double doors

Fit the double doors to the front opening and then lock them into place with hinges. Install a latch so you can secure them door closed together tightly. Moreover, you need to fit the handles to doors.

Fitting the window trims

Fitting the window trims

Fit the 3×3 windows to the side of the shed. Afterwards, install the 1×4 trims to the doors. Align the edges with attention and lock them into place with 2″ brad nails.

Back wall trims

Back wall trims

Use 1×4 lumber for the back and front trims. Cut both ends of the horizontal trim at 30 degrees. Fit the trims into place tightly with 2″ brad nails. Leave no gaps between the trims for a professional result.

Fitting the side wall trims

Fitting the side wall trims

Fit the 1×4 trims to the sides of the shed, as well.

16x20 Shed Plans Free

16×20 Shed Plans Free

If you have’t looked over PART 1 yet, I recommend you to do it, as it will show everything you want to know about building the frame of the shed. In PART 2 of the project I show you how to frame the gable roof. This is a large shed that you can easily convert into a workshop.

 

 

This woodworking project was about 16×20 garden shed doors. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

5 comments

Michael -

I was hoping to get a pdf of the 16×20 shed plans for shed, roof and doors, Can you email them to me?

Reply
Ovidiu -

Each PART of the project comes with its own pdf. Please read the FAQs to get the plans: http://myoutdoorplans.com/faq/

Reply
Jamie Hord -

I love how detailed these plans are with both images and written. I’m planning on building the 16×20 as a shop to build an Ultralight Airplane in after building the Ultralight I plane to use the building as a hanger for the airplane. Being Ultralight it will weigh no more than 250 lbs. so the wood floors will hold up just fine. The only modifications I may need to make slightly taller (10.5ft) and the doors may need to be 8ft.x10ft. although with my skill that will be easily done.

Reply
Michael -

I PAID FOR THE PLANS FOR A 16X20 SHED WITH DEBIT CARD AND DID NOT GET MY PLANS

Reply
Ovidiu -

There s no order with your email on my shop. Use the contact form and send me an email with what you bought and with what email you used, so I can take a look: https://myoutdoorplans.com/contact-us/

Reply

Leave a Reply to Ovidiu Cancel Reply