Home 16x16 16×16 Gambrel Shed Plans

16×16 Gambrel Shed Plans

by Ovidiu

 

This step by step diy project is about 16×16 gambrel shed plans. I have designed this compact barn shed so you can create a lot of storage space for your tools, garden items and other things you don’t use on a regular basis. This shed features a nice design and large front doors.Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

16×16 Gambrel Shed Plans

Building-a-16x16-gambrel-shed

Building-a-16×16-gambrel-shed

 

Cut & Shopping Lists

  • A – 6 pieces of 4×4 lumber – 16′ long SKIDS
  • B – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 189″ long FLOOR FRAME
  • C – 6 pieces of 3/4″ plywood – 48″x96″ long, 4 pieces – 48″x48″ long FLOOR
  • D – 2 pieces of 2×4 lumber – 192″ long, 1 piece – 185″ long, 11 pieces – 91 1/2″ long 2xSIDE WALL
  • E – 2 piece of 2×4 lumber – 56 1/2″ long, 1 piece – 192″ long, 1 piece – 185″ long, 8 pieces – 91 1/2″ long, 2 pieces – 86″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 185″ long, 1 piece – 192″ long, 9 pieces – 91 1/2″ long BACK WALL
  • G – 16 pieces of T1-11 5/8″ siding – 48″x96″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

 

 

How to build a 16×16 barn shed plans

Floor-frame

Floor-frame

The first step of the project is to build the floor frame for the barn shed. Cut the floor joists from 2×6 lumber and then lay them on a level surface. Align the edges flush and make sure the corners are square. Drill pilot holes through the rim joists and then insert 3 1/2″ screws into the perpendicular components. Make sure the corners are square and align the edges before inserting the screws.

Fitting the skids

Fitting the skids

Select the location for the barn shed after reading the local building codes. Remove the vegetation layer and then level the surface thoroughly. Compact a layer of gravel on the ground and then lay the skids equally-spaced, as shown in the diagram. Use rafter ties to lock the floor frame to the skids.

Floor sheets

Floor sheets

Next, you need to lay the 3/4″ plywood sheets to the floor frame. Align the edges flush and drill pilot holes. Insert the 1 5/8″ screws every 8″ along the framing, for a professional result. Leave no gaps between the sheets for a professional result.

Back-wall-frame

Back-wall-frame

Frame the back wall for the barn shed from 2×4 lumber. Cut the components at the right dimensions, using the information from the diagram. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center. Align the edges flush and make sure the corners are square. Fit the double plate to the top of the wall and secure it into place with screws.

Side-wall-frame

Side-wall-frame

Frame the side walls for the barn shed using the same techniques described above. Place double studs at both ends of the side walls. Fit 1/2″ plywood blockings between the double studs, for a professional result.

Front-wall-frame

Front-wall-frame

Cut the components from 2×4 lumber for the front wall. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Use 2×6 lumber for the double header. Fit 1/2″ plywood between the double header beams. You can adjust the size of the door opening to suit your needs.

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the shed and align the edges flush. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Plumb the wall frames with a spirit level for a professional result. Moreover, you need to lock the adjacent wall together by drilling pilot holes and inserting 3 1/2″ screws.

Side wall - Siding

Side wall – Siding

Attach T1-11 siding sheets to the sides and back of the gambrel shed. Use 6-8d nails to secure the sheets along the framing, every 8″. Leave no gaps between the sheets for a professional result.

Front wall - Siding

Front wall – Siding

Fit the T1-11 siding sheets to the front of the shed, as well. Make the cuts so you can fit the sheets around the door opening. Align the edges flush and use 6-8d nails to lock the sheets into place tightly. Leave no gaps between the sheets for a professional result.

16x16 Gambrel Shed Plans

16×16 Gambrel Shed Plans

Last but not least, you need to take care of the finishing touches. Therefore, fill the holes with wood putty and then let it dry out for several hours. Smooth the surface with 120-220 grit sandpaper and apply a few coats of paint or stain to enhance the look of the shed and to protect the components from decay.

16x16 Barn Shed Plans

16×16 Barn Shed Plans

Seen from the back, the 16×16 barn shed has a nice design and appearance. As you can easily notice in the diagram, this gambrel shed has generous overhangs.

16x16 Gambrel Shed Plans - Front view

16×16 Gambrel Shed Plans – Front view

Don’t forget to take a look over PART 2 and PART 3 of the barn shed, so you learn how to build the gambrel roof and the double trims. Moreover, I will also show you how to fit the decorative doors to the front, back and sides of the barn.

 

 

This woodworking project was about 16×16 gambrel shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

15 comments

Tom -

Hi. I was wondering if it’s possible to put a loft in the 16 x 16 Gambrel Shed Plan.

Thanks

Reply
Julian -

Yes, it is possible. Fit support beams to the bottom of the trusses (12′ long) lock them into place tightly then fit the 3/4″ plywood floor.

Reply
Tim -

I am interested in a 16 x 16 foot gambriel roof shed with concrete foundation. Do you have any plans for this? Will your plans modification app allow modifiying any of your plans to add an 8 foot roll type garage door and walk in entry type door? Can your drawings be submittted for building permit?

Thanks in advance for answering my questions, your $37 offer looks good.

Reply
Ovidiu -

There is no $37 offer, all my plans are free and it will stay like this. I don’t design custom plans and my plans are for informational purpose.

Reply
David -

How many rafter ties? What size screw for rafter ties? Looks like good plans but need more hardware info. .

Reply
Ovidiu -

2 ties for each rafter. 1 5/8″ screws. I wouldn’t recommend you this project if you have these kind of questions, though.

Reply
Edward -

I am a novice. So this is more of a question than anything else.. I am building the floor. 4 2×6 are needed for the outside of the box. As I am measuring, it sure looks like a total of 16 rather than 15 2x6s are needed.

Reply
Ovidiu -

You need 15 for the floor frame.

Reply
Edward -

Thanks. We are on the roof now. What should the edge to edge measurement of the trusses be? 16 FT inside to inside? or outside to outside? or something else?

Reply
Ovidiu -

16 ft outside to outside. You can change that by adjusting the size of the rafters (keep the angles)

Reply
Jorge Lozano -

By loft do you mean a second floor?

Reply
Ovidiu -

Yes.

Reply
Stan Given -

Hi … Do you have plans for a 16×14 Gambrell Shed?

Reply
Ovidiu -

Here are all my 14×16 projects: https://myoutdoorplans.com/category/14×16/

Reply
Evil Empryss -

Thank you for sharing all this content! I adore this shed, but my county is insisting on building plans before they will provide me a permit. Do you have any that would work for me?

Reply

Leave a Reply to Julian Cancel Reply