Home Shed 14×20 Lean to Shed Roof Plans

14×20 Lean to Shed Roof Plans

by Ovidiu

 

This step by step diy project is about 14×20 shed roof plans. This is PART 2 of the large shed project, where I show you how to build the lean to roof for the project. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

14×20 Lean to Shed Roof Plans

Building-a-14x20-lean-to

Building-a-14×20-lean-to

 

Cut & Shopping Lists

  • I – 2 pieces of T1-11 siding – 36″x48″ long, 2 pieces – 28 1/4″x48″ long, 2 pieces – 20 1/2″x48″ long, 2 pieces – 12 1/2″x24″ long SIDING
  • J – 16 pieces of 2×10 lumber – 192″ long RAFTERS
  • J – 2 pieces of 2×4 lumber – 19 1/4″ long, 2 pieces – 11 1/4″ long, 2 pieces – 5 1/2″ long SUPPORTS
  • K – 8 pieces of 3/4″ plywood – 48″x96″ long, 4 pieces – 48″x48″ long ROOF
  • L –  2 pieces of 2×12 lumber – 192″ long, 2 pieces – 244 1/4″ long TRIMS
  • M – 350 sq ft of tar paper, 350 sq ft of asphalt shingles ROOFING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a lean to roof for a 14×20 shed

Building-the-rafters

Building-the-rafters

The first step of the project is to build the rafters for the shed using 2×10 lumber. Mark the cut lines on the beams and then get the job done with a circular saw. Smooth the edges flush with sandpaper.

Fitting-the-rafters

Fitting-the-rafters

Fit the rafters to the top of the shed. Place the rafters every 16″ on center, as shown in the diagram. Use rafter ties to lock the rafters into place tightly.

Side roof supports

Side roof supports

Fit the 2×4 supports to the sides of the roof. Drill pocket holes at both ends of the supports and then lock them into place with 2 1/2″ screws.

Fitting the side siding panels

Fitting the side siding panels

Fit the T1-11 siding sheets to the sides of the lean to shed. Mark the cut lines on the sheets and then get the job done with a saw. Align the edges with attention and insert 6d nails, every 8″ along the framing.

Fitting the roof sheets

Fitting the roof sheets

Fit the 3/4″ plywood sheets to the roof of the lean to shed. Align the edges with attention and insert 1 5/8″ screws, every 8″ along the rafters.

Fitting the roof trims

Fitting the roof trims

Fit 2×12 beams to the sides and then to the front and back of the shed roof. Align the edges and insert 2 1/2″ screws, after drilling pilot holes, to lock them into place tightly.

Fitting the roofing

Fitting the roofing

Cover the roof with tar paper and then install the asphalt shingles. Make sure you also install the appropriate drip edges, so you can seal the shed roof. Read the manufacturer’s instructions for a tight fit.

14x20 Lean to shed Plans

14×20 Lean to shed Plans

This shed is easy to build, sturdy and it has a nice design. The lean to design will add charm to the property and it is super sturdy. Make sure you check out PART 1 and PART 3 of the project, so you learn how to build the frame and the doors for the shed.

 

 

This woodworking project was about 14×20 lean to shed roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment