This step by step diy project is about 12×24 shed doors plans. This is PART 3 of the outdoor gable shed project, where I show you everything you want to know about framing the double doors and fitting the trims. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.
Projects made from these plans
12×24 Shed Doors Plans
- N – 2 pieces of 2×4 lumber – 87 1/2″ long, 1 piece – 79″ long JAMBS
- O – 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long, 2 pieces of T1-11 siding – 36″x87 1/2″ long 2xDOOR
- P – 4 pieces of 2×4 lumber – 95 1/4″ long, 4 pieces – 96″ long, 2 pieces – 144″ long, 2 pieces – 30 1/4″ long, 1 piece – 139 1/2″ long, 1 piece – 18 1/2″ long, 3 pieces – 282 1/4″ long TRIMS
- P – 2 pieces of 1×4 lumber – 48″ long, 3 pieces – 55″ long, 2 pieces – 80″ long, 3 piece – 43″ long TRIMS
How to build the shed doors
Fit 2×4 jambs around the door opening. Align the edges flush and insert 2 1/2″ screws to lock the jambs into place tightly.
Build the door panels from T1-11 siding and the trims from 2×4 umber. Align the trims flush with the door panels and secure them together with glue and 2″ nails.
Fit the double doors to the front opening. Align the edges with attention and use hinges to secure the doors to the jambs. Moreover you need to attach one latch to the doors, so you lock them into place tightly. Fit handles to the double doors.
Fit the side door into place and then fit the 1×4 trims around the window. Use 2″ nails to secure the trims into place tightly.
Fit the 1×4 trims to the sides of the shed. Align the edges flush and insert 2″ nails to lock them into place tightly.
Fit the trims to the back wall of the shed.
Fit the trims to the front of the shed.
Taking care of the finishing touches will help you make the barn shed stand out. Cover the components with stain or paint so you protect them from decay and to enhance the look of the shed.
You need to check out PART 1 and PART 2 of the shed, so you learn how to build the frame and the roof for the large outdoor gable shed. Moreover, I strongly recommend you to check out the rest of the shed projects that I have on the blog.
This woodworking project was about 12×24 shed doors and trims plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.