12×16 Shed Plans

This step by step diy project is about diy 12×16 shed plans. If you are looking for a large storage shed that is both easy to build and that has a really nice appearance, then you should take a look over my plans. This garden project has more parts so take a look over the rest of the sections to learn how to build the roof and the door. Moreover, I have designed shed with many sizes so check them out, as well. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

How to build a 12x16 garden shed

Diy Large Shed

 

12×16 Shed Plans

Building-a-12×16-shed

Cut & Shopping Lists

• A – 4 pieces of 4×4 lumber – 192″ long SKIDS
• B – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 141″long JOISTS
• C – 5 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x48″ long FLOOR
• D – 2 pieces of 2×4 lumber – 192″ long, 1 pieces – 185″long, 11 pieces – 81″ long 2xSIDE WALL
• D – 1 piece of 2×4 lumber – 144″ long, 1 piece – 137″ long, 2 pieces – 38 1/2″ long, 6 pieces – 81″ long, 2 pieces – 75 1/2″ long, 2 pieces of 2×6 lumber – 63″ long FRONT WALL
• D – 2 pieces of 2×4 lumber – 144″ long, 1 piece – 137″ long, 7 pieces – 81″ long BACK WALL
• E – 14 pieces of T1-11 – 48″x96″ long, 2 pieces – 24″x48″ long SIDING

• 2 pieces of 2×6 lumber – 16′
• 13 pieces of 2×6 lumber – 12′
• 2 pieces of 2×6 lumber – 6′
• 4 pieces of 4×4 lumber – 16′
• 6 pieces of 3/4″ plywood – 48″x96″
• 6 pieces of 2×4 lumber – 16′
• 6 pieces of 2×4 lumber – 12′
• 36 pieces of 2×4 lumber – 8′
• 14 pieces of T1-11 – 48″x96″
• 1 piece of 1/2″ plywood – 48″x96″
• 8d nails, 2 1/2″ screws, 3 1/2″ screws
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 12×16 Shed Plans
• PART 2: 12×16 Shed Roof Plans
• PART 3: 12×16 Shed door and Trims Plans

How to build a 12×16 shed

Building-the-floor-frame

The first step of the project is to build the floor for the 12×16 shed. Cut the joists from 2×6 lumber using a good saw. Align the beams, making sure the corners are square, drill pilot holes and insert 3 1/2″ screws to lock them together tightly.

Fitting the skids

After assembling the floor frame, you need to attach the 4×4 skids. Use metal connectors to secure the skids to the joists, after aligning them or toenail them.

Fitting the plywood floor sheets

Continue the project by attaching the 3/4″ plywood sheets to the floor frame. Leave no gaps between the floor sheets and secure them into place with 1 1/4″ screws, every 12″ along the joists.

Building-the-side-walls

Assemble the side walls from 2×4 lumber. cut the studs and the plates at the right dimensions. Drill pilot holes through the top plates and insert 2 1/2″ screws into the studs, using the information from the diagram. Alternatively, you can use a framing gun and nails. Make sure the corners are square for a professional result.

Wall Studs

As you can see in the plans, you need to fit 1/2″ plywood fillings to the end studs.

Building-the-front-wall

Continue the project by assembling the front wall. As you can notice in the diagram, you need to leave enough space for the door opening. You can easily adjust the size of the door to suit your nails. As you can see in the plans, you need to install the jack studs to reinforce the structure of the shed.

Building the double header

The double header for the door is made from 2×6 lumber filled with 1/2″ plywood. Cut the plywood to size and glue it to the headers with construction glue. In addition, drive a few screws or nails to lock everything tightly.

Building-the-back-wall-frame

Build the back wall using the same techniques described above. You should also notice the double plates that will add more rigidity to the walls and to the overall framing.

Fitting the side walls

Lift the side walls and lay them to the floor of the shed. Align the edges with attention and use a spirit level to plumb the walls. Drill pilot holes through the bottom plates and insert 2 1/2″-3 1/2″ screws into the floor frame, every 8″. As you can notice in the plans, you need to secure the walls into place temporarily with braces.

Assembling the shed frame

Fit the front and back walls to the shed floor and lock them  to the adjacent walls with 2 1/2″ screws. Make sure the corners are square and insert screws through the bottom plates into the floor, as well.

Attaching the sheets to the back wall

Build the exterior walls from 5/8″ T1-11 siding. As you can notice in the diagram, you need to make some cuts to the sheets so you cover the whole surface. Use 8d galvanized nails to secure the sheets to the wall frames. Align everything with attention and insert the nails every 8″ along the studs.

Fitting the front panels

Make the cuts to the sheet that goes around the door opening. Align everything so the edges are flush and secure them into place with 8d nails.

Fitting the side panels

Attach the rest of the sheets to the back wall of the shed. Align the edges with attention and secure them to the wall studs with 8d nails or screws. Make sure you leave no gaps between the sheets for a professional result.

12×16 Shed Plans

Make sure you check out the rest of the project, so you learn how to frame the roof and how to attach the door and the trims to the shed. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. Premium Plans for this project available in the Shop.

If you want to get this project as a PDF file (different design with re-engineered structure), with 1 full cut list and 1 full shopping list, check out the GET PDF PLANS button bellow.

This woodworking project was about 12×16 shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

EXPLORE MORE IDEAS FOR: