Home 12x16 12×16 Lean to Shed Plans

12×16 Lean to Shed Plans

by Ovidiu

 

This step by step diy project is about diy 12×16 lean to shed plans. If you are looking for a large lean to shed project, I recommend you to check out these plans. This shed is both roomy and has a nice lean to appearance. Moreover, I have designed shed with many sizes so check them out, as well. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

It’s that simple to build your 12×16 storage shed!

 

 

12×16 Shed Plans

Building-a-12x16-lean-to-shed

Building-a-12×16-lean-to-shed

 

Cut & Shopping Lists

  • A – 4 pieces of 4×4 lumber – 192″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 141″long JOISTS
  • C – 5 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x48″ long FLOOR
  • D – 2 pieces of 2×4 lumber – 192″ long, 1 pieces – 185″long, 11 pieces – 81″ long 2xSIDE WALL
  • E – 1 piece of 2×4 lumber – 144″ long, 1 piece – 137″ long, 2 pieces – 38 1/2″ long, 6 pieces – 81″ long, 2 pieces – 75 1/2″ long, 2 pieces of 2×6 lumber – 63″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 144″ long, 1 piece – 137″ long, 7 pieces – 81″ long BACK WALL

  • 2 pieces of 2×6 lumber – 16′
  • 13 pieces of 2×6 lumber – 12′
  • 2 pieces of 2×6 lumber – 6′
  • 4 pieces of 4×4 lumber – 16′
  • 6 pieces of 3/4″ plywood – 48″x96″
  • 6 pieces of 2×4 lumber – 16′
  • 6 pieces of 2×4 lumber – 12′
  • 36 pieces of 2×4 lumber – 8′
  • 1 piece of 1/2″ plywood – 48″x96″
  • 8d nails, 2 1/2″ screws, 3 1/2″ screws
  • wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

How to build a 12×16 shed

Building-the-floor-frame

Building-the-floor-frame

Build the floor for the shed from lumber. Alternatively, you can pour a concrete floor if you want a permanent construction. Cut the joists from 2×6 lumber using a good saw. Align the beams, making sure the corners are square, drill pilot holes and insert 3 1/2″ screws to lock them together tightly.

Fitting the skids

Fitting the skids

After assembling the floor frame, you need to attach the 4×4 skids. Use metal connectors to secure the skids to the joists, after aligning them or toenail them.

Fitting the plywood floor sheets

Fitting the plywood floor sheets

Continue the project by attaching the 3/4″ plywood sheets to the floor frame. Leave no gaps between the floor sheets and secure them into place with 1 5/8″ screws, every 12″ along the joists.

Building-the-side-walls

Building-the-side-walls

Assemble the side walls from 2×4 lumber. cut the studs and the plates at the right dimensions. Drill pilot holes through the top plates and insert 2 1/2″ screws into the studs, using the information from the diagram. Alternatively, you can use a framing gun and nails. Make sure the corners are square for a professional result.

Wall Studs

Wall Studs

Fit 1/2″ plywood fillings to the end studs, so you reinforce the walls.

Building-the-front-wall

Building-the-front-wall

Continue the project by assembling the front wall. As you can notice in the diagram, you need to leave enough space for the door opening. You can easily adjust the size of the door to suit your nails. Use 2×6 lumber for the double header.

Building the double header

Building the double header

The double header for the door is made from 2×6 lumber filled with 1/2″ plywood. Cut the plywood to size and glue it to the headers with construction glue. In addition, drive a few screws or nails to lock everything tightly.

Building-the-back-wall

Building-the-back-wall

Build the back wall using the same techniques described above. You should also notice the double plates that will add more rigidity to the walls and to the overall framing.

Fitting the side walls

Fitting the side walls

Lift the side walls and lay them to the floor of the shed. Align the edges with attention and use a spirit level to plumb the walls. Drill pilot holes through the bottom plates and insert 2 1/2″-3 1/2″ screws into the floor frame, every 8″. As you can notice in the plans, you need to secure the walls into place temporarily with braces.

Assembling the shed frame

Assembling the shed frame

Fit the front and back walls to the shed floor and lock them  to the adjacent walls with 2 1/2″ screws. Make sure the corners are square and insert screws through the bottom plates into the floor, as well.

12x16-lean-to-shed-plans

12×16-lean-to-shed-plans

Make sure you check PART 2 of the project, so you learn how to build the roof for this large lean to shed project. In addition, you could check the rest of the shed plans I have on this site for more building ideas.

If you want to see newer plans for a 12×16 lean to shed, that also features a side door and a window, with much stronger frame (suitable for snow), take a look over these plans.

Large-lean-to-shed-plans

Large-lean-to-shed-plans

Last but not least, you should take care of the finishing touches. Therefore, fill the holes with wood putty and let the compound to dry out for several hours. Smooth the surface with medium-grit sandpaper along the wood grain.

Top Tip: Take a look over PART 2 of the project, so you learn how to build the roof and the front double doors for this shed project.

If you want to get PREMIUM PLANS for this project (different design with re-engineered structure), in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

 

 

This project was about 12×16 lean to shed plans. If you want to see more outdoor plans, we recommend you to check out the rest of the projects. LIKE us on Facebook to the the first that gets our latest projects and send us pictures with your woodworking projects.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

10 comments

Kris -

Great plans! I will be drawing my own modified version (12×15) of this plan to meet personal design choices (doors, windows, etc) and local code. I have a few questions that will help me come up with my design.

1) How do you decide which wall (front or side) has the double stud on the ends?

2) Why do you use an upper wall section as apposed to using longer 2x4s to construct the tall wall?

3) I want the door shifted off center. You place a stud in the center of the double doors to help construct the doors. Should the stud locations be shifted so that a stud is centered at the door as you have done?

Reply
Jack -

1. Usually the side walls or the long walls have the double studs at both ends.
2. Using the top wall section allows me to join all the four walls together tightly with the top double plates. This create a stronger structure.
3. If you change the location of the double doors, offsetting them from the center, you don’t need to change the location of all studs. Just make the modifications so you can create the door opening.

Reply
Wayne Hess -

Love the plans but where do I actually download the plans.

Reply
Ovidiu -

Please read the Faqs: http://myoutdoorplans.com/faq/

Reply
Abby Hageman -

I can’t seem to get this to print. I’ve tried the printfriendly icon, it just spins the animation. I’ve tried the more button and chose to print and it prints only the first page, and then 8 additional pages of the “search, build, share” section on the right side of the page. 🙁

Reply
Ovidiu -

You should try with another browser. It works fine for me.

Reply
Dan Waltuck -

Plans show the skids being installed on top of the floor framing, but never tell you to flip it all over!

Reply
Ovidiu -

And you don’t see the skids under the floor in the rest of the diagrams? How would you be able to attach the plywood boards over the skids? I hope your comment is a joke, otherwise you shouldn’t build a shed by yourself, it will be a dangerous project. I made the diagram, so it’s more visible and understand how the skids go under the floor frame.

Reply
Stephanie -

I have been looking for just the right set of plans for the shop that I am going to build this summer. And here they are. But of course I am going to put my own twist to them as far as my build goes.
But what I like best is the materials list and the sizes of lumber needed. This will help greatly in my budget planning.
One soue I plan on using a bunch will be the habitat for humanity outlet store for materials like windows and light fixtures. There is also another used materials store here in town where I will look for things to. Luckily I am spoiled when it comes to having tools, my other half has outfitted my current space completely for me.

Reply
Louis Markovits -

Thank you very much for the plans. You have put a great effort to create these plans and other people are abusing it I am sorry for that. Your plans are free and now days in our lives almost nothing is free. So please let me take the opportunity to thank you again and again for your great work please keep doing your work and God bless you.

Reply

Leave a Comment