Home 10x14 10×14 Run In Shed Plans

10×14 Run In Shed Plans

by Ovidiu

 

This step by step diy project is about free 10×14 run in shed plans. I have designed this small shed with a run in front wall, so you can use it in your backyard. This shed is super easy to build and it has an easy access to the interior. Read the local codes before starting the project, so you comply with the legal requirements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

10×14 Run In Shed Plans

Building-a-10x14-run-in-shed

Building-a-10×14-run-in-shed

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 120″ long, 2 pieces – 168″ long BASE
  • B – 2 pieces of 2×4 lumber – 113″ long, 1 piece – 116 1/2″ long, 9 pieces – 87″ long 2xSIDE WALL
  • C – 2 pieces of 2×4 lumber – 168″ long, 1 piece – 161″ long, 14 pieces – 87″ long BACK WALL
  • D – 2 pieces of 4×4 lumber – 121 1/2″ long POST
  • E – 1 piece of 2×8 lumber – 168″ long SUPPORT BEAM

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a 10×14 run in shed

Skids

Skids

The first step of the project is to build the beams for the base of the shed using 4×4 lumber. Cut both ends of the beams, as shown in the diagram. Make parallel cuts to the indicated areas and then remove the excess with a chisel. Smooth the surface with sandpaper.

Assembling the base of the shed

Assembling the base of the shed

Select the location for the shed and then remove the vegetation layer. Level the surface with a spirit level and then fit the 4×4 pressure treated beams into place. Assemble the base for the shed using 3 1/2″ screws. Make sure the corners are square, drill pilot holes and then insert the screws to lock the base beams together tightly.

Use 2×3 anchors to lock the base into the ground, every 16″. Alternatively, use hurricane anchors if you live an area with strong winds.

Back-wall-frame

Back-wall-frame

The next step of the project is to build the back wall from 2×4 lumber. Cut all the components at the right dimensions, after taking accurate measurements. Make sure the edges are flush and check if the corners are square. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Place double studs at both ends of the wall, with 1/2″ plywood between them. Fit the studs every 16″ on center.

Side wall frame

Side wall frame

Build the side walls for the run in shed. Cut the components at the right dimensions and then assemble the frames using the same techniques described above.

Fitting the wall frames

Fitting the wall frames

Attach the walls to the base with 2 1/2″ screws. Drill pilot holes through the bottom plates and insert 2 1/2″ screws into the base beams. Use a spirit level to plumb the posts vertically and then check if the corners are square. Align everything with attention for a professional result.

Building the posts

Building the posts

Use 4×4 lumber for the front posts. Mark the cut lines on the top of the posts and then get the job done with a circular saw. Make 1 1/2″ deep parallel cuts inside the marked area and then get the job done with a chisel. Smooth the recess with sandpaper, for a professional result.

Fitting the posts

Fitting the posts

Fit the posts to the front of the shed. Align the edges with attention and then drill pilot holes. Insert 5″ screws to lock them to the side wall properly. Use a spirit level to plumb the posts properly.

Fitting the top beam

Fitting the top beam

Fit the 2×8 support beam to the top of the posts. Make sure the corners are square and align the edges with attention. Drill pilot through the beam and posts and then insert 4″ carriage bolts. Use at least 3 bolts for each joint.

10x14 Run In Shed Plans

10×14 Run In Shed Plans

This 10×14 loafing shed is extremely versatile when it comes to uses. The best part is that it can be really easy to build, with my free plans.

10x14 Run In Shed Plans - Back view

10×14 Run In Shed Plans – Back view

This is a simple project you should be able to build in a few days without much effort. This 10×14 run in shed is a multi purpose shelter. You can use this run in shed for storing tools, equipment or even outdoor furniture. Check out PART 2 of the project to learn more on how to build the roof for the shed.

If you want to download this plans a PDF file with full Cut list and full Shopping list, make sure you check the GET PDF PLANS button bellow. Thank you for your support.

 

This woodworking project was about run in shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment