Home 10x12 10×12 Shed with Side Porch Plans

10×12 Shed with Side Porch Plans

by Ovidiu

 

This step by step diy project is about 10×12 shed with side porch plans. If you want to build a simple and compact shed, but you want to add a twist to it, these plans should suit your needs perfectly. This shed features a front door and double side doors for an easy access to the inside. The side porch adds unique appeal to the project. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

10×12 Shed with Side Porch Plans

Building-a-10x12-shed-with-porch

Building-a-10×12-shed-with-porch

 

Cut List

  • A – 4 pieces of 4×4 lumber – 144″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 144″ long, 10 pieces – 117″ long FLOOR FRAME
  • C – 3 pieces of 3/4″ plywood – 48″x96″ long, 3 pieces – 24″x48″ long FLOOR
  • D – 2 pieces of 2×4 lumber – 144″ long, 1 piece – 137″ long, 12 pieces – 89 1/2″ long BACK WALL
  • E – 1 piece of 2×4 lumber – 30″ long, 1 piece – 78″ long, 1 piece – 137″ long, 1 piece – 144″ long, 11 pieces – 91 1/2″ long, 2 pieces – 75 1/2″ long, 5 pieces – 10 1/2″ long, 2 pieces – 26 1/2″ long, 2 pieces – 43 1/2″ long, 2 pieces of 2×6 lumber – 39″ long, 4 pieces – 21″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 16″ long, 1 piece – 113″ long, 1 piece – 120″ long, 4 pieces – 91 1/2″ long, 2 pieces – 78 1/2″ long, 4 pieces – 7 1/2″ long, 2 pieces – 75″ long SIDE WALL
  • G – 2 pieces of 2×4 lumber – 113″ long, 1 piece – 120″ long, 6 pieces – 91 1/2″ long SIDE WALL
  • H – 10 pieces of T1-11 siding – 48″x96″ long, 1 piece – 24″x96″ long, 1 piece – 16″x24″ long SIDING
  • I – 2 pieces of 4×4 lumber – 102 1/4″ long, 1 piece – 144″ long POSTS

Shopping List

  • 5 pieces of 4×4 lumber – 12′
  • 2 pieces of 4×4 lumber – 10′
  • 2 pieces of 2×6 lumber – 12′
  • 10 pieces of 2×6 lumber – 10′
  • 4 pieces of 3/4″ plywood – 4’x8′
  • 6 pieces of 2×4 lumber – 10′
  • 5 pieces of 2×4 lumber – 12′
  • 36 pieces of 2×4 lumber – 8′
  • 4 pieces of 2×6 lumber – 8′
  • 1 piece of 1/2″ plywood – 4’x8′
  • 11 pieces of T1-11 siding – 4’x8′
  • 6d nails, 2 1/2″ screws, 3 1/2″ screws
  • wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

 

 

How to build a 10×12 shed with porch

Floor-frame---10x12-shed

Floor-frame—10×12-shed

The first step of the project is to build the floor frame. Cut the components from 2×6 lumber, as shown in the diagram. Place the joists every 16″ on center, for a professional result. Check if the corners are are square, drill pilot holes through the rim joists and insert 3 1/2″ screws.

Fitting the skids

Fitting the skids

Select the location for the shed and level the surface thoroughly. Remove the vegetation layer and make sure you comply with the local building codes. Fit the skids on the location. Place the floor frame and then use rafter ties to lock the skids to the frame. Align the edges with attention for a professional result.

Floor sheets

Floor sheets

Fit the 3/4″ plywood sheets to the floor frame and align the edges with attention. Insert 1 5/8″ screws every 8″ along the joists. Leave no gaps between the sheets for a professional result.

 

Building the wall frames

side-wall-frame

side-wall-frame

Build the side walls of the shed from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Align the edges and make sure the corners are square. Alternatively, you could use framing nails and a framing gun.

front-wall-frame-shed

front-wall-frame-shed

Continue the project by assembling the front wall frame. Use 2×4 lumber for the front wall frame. Use 2×6 lumber and 1/2″ plywood for the double door header. Use 1/2″ plywood and 2×6 beams and 1/2″ plywood for the window headers. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and align the edges flush. You can adjust the size of the door and window openings to suit your needs.

Back wall frame

Back wall frame

Build the back wall for the shed using the same techniques described above and the information from the diagram. Cut the studs and then the plates from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center for a professional result.

side-wall-with-door-frame

side-wall-with-door-frame

Build the opposite side wall using the diagram shown above. Cut the components from 2×4 at the dimensions shown in the diagram. Use 2×6 lumber and 1/2″ plywood for the double header. Fit the header into place and make sure the corners are square. Adjust the size of the double doors to suit your needs.

 

Assembling the shed

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the shed. Align the edges with attention and plumb the walls with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Lock the adjacent walls together tightly using 3 1/2″ screws.

Side wall with doors siding

Side wall with doors siding

Fit the T1-11 siding sheets to the side wall with doors. Mark the cut lines on the sheets and then get the job done with a circular saw. Align the edges with attention and insert 6-8d nails, every 8″ along the framing.

Plain side wall with siding

Plain side wall with siding

Fit the siding panels to the opposite side wall of the shed, as show in the diagram. Leave no gaps between the sheets and align everything with attention. Insert the nails so you can lock the sheets into place tightly.

Front wall

Front wall

Fit the siding sheets to the front wall of the shed. Make cuts so you can fit the sheets around the door opening and around the window opening.

Back wall siding

Back wall siding

Fit the siding to the back wall of the shed, in the same manner described above.

Porch posts

Porch posts

Fit 4×4 posts so you can frame the porch of the shed. You need to pour 3′ footings and then use anchors to lock the posts into place. Use a spirit level to plumb the posts and then fit the top beam, as show in the diagram. Use metal connectors to secure the beam to the top of the posts.

 

Finishing touches

10x12 shed with side porch plans

10×12 shed with side porch plans

Make sure you check out the rest of the project so you learn how to build the roof and how to frame the doors. This small shed has multiple uses, so you the most of your space.

10x12 shed with porch plans - Back view

10×12 shed with porch plans – Back view

Take a look over PART 2 and PART 3 of the project, so you learn how to build the double doors and the roof. I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE.

If you want to get this project as a PDF file with 1 full Cut list and 1 full Shopping list, please take a look over the GET PDF PLANS button bellow.

 

 

This woodworking project was about 10×12 gable shed with porch plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Daniel Sterner -

Received an email for the 10×12 Shed with Side Porch Plans. I love this project, but cannot go to Page 2 or Page 3 to see how to assemble the Roof and Double Doors. Thanks

Reply
Ovidiu -

You can see them, because I haven’t published them yet. I will post PART 2 today and PART 3 tomorrow.

Reply

Leave a Reply to Daniel Sterner Cancel Reply