Home Kids Furniture Seesaw Plans

Seesaw Plans

by Ovidiu

 

This step by step diy woodworking project is about seesaw plans. Building a wooden seesaw is a great project for your kids, if you want to entertain and keep them busy. In addition, the greatest advantage of this project is that you don’t have to spend a significant amount of money, as you can even get the job done by using scrap materials. Moreover, you can make the seesaw unique by adding a few finishing touches (paint, handles, shape).

Nevertheless, there are a few things that you should take into account before starting the actual project, if you want to get a nice appearance. First of all, you need to use quality and weather-resistant lumber, such as pine, cedar and redwood. Use a thick water pipe to build the pivot, as well as heavy-duty saddle clips. Lock all the components together with great attention, making sure the parts are aligned. See all my Premium Plans HERE.

 

 

Projects made from these plans

Previous
  Add-image

 

 

Cut & Shopping Lists

  • A – 1 used tire TIRE
  • B – sand, gravel, cement and 1×4 lumber CONCRETE
  • C – 4 pieces of 2×3 lumber – 20″ long SUPPORT
  • D – 1 pieces of 2×3 lumber – 14″ long BRACE
  • E – 1 piece of 2×8 lumber – 96″ long PLANK
  • F – 1 piece of 1″ water pipe – 14″ long, 3 saddle clips PIVOT  
  • G – 4 pieces of 2×2 lumber – 9″ long, 2 pieces – 15″ long HANDLES

Tools

 Hammer, Tape measure, Framing square

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building a seesaw

Building a seesaw

Building a seesaw

 

Top Tip: A wooden seesaw is entertaining and a great way to spend the weekends, especially for your kids. If you want to put a big smile on the faces of your kids, while investing a small amount of money, we recommend you to pay attention to our plans and instructions.

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Seesaw Plans

Fitting slats inside the tire

Fitting slats inside the tire

The easiest way to secure the support of the seesaw is to use an old tire. As you can see in the image, you need to fit several slats inside the tire, before locking the supports into concrete. Make sure the tire has a nice appearance and you don’t leave any gaps between the slats.

Make sure you use pressure-treated lumber, as the slats will be in direct contact with the soil. The wooden components should be weather-resistant.

Building supports

Building supports

Building the wooden supports for the kids seesaw is a straight-forward process, if the right plans and techniques are used. As you can notice in the image, you need to use 2×3 lumber and 5″ long carriage bolts.

Top Tip: Cut the slats at the right size and align them at both ends, before drilling pilot holes and inserting the carriage bolts. Use a carpentry square to check if the corners are right-angled.

Building the support

Building the support

Fit the support inside the tire and secure it temporary with braces, before filling the tire with concrete. Use a spirit level to check if the support is plumb. Leave the concrete to dry out for several days, before installing the main component.

It is essential to lock the support into concrete, otherwise you might injure while using the seesaw. The 2×4 braces will keep the support plumb, util the concrete has dried out.

Installing the pipe

Installing the pipe

The next step of the woodworking project is to fit the pivot pipe to the seesaw plank. As you can notice in the plans, you need to fit the pipe along the middle of the plank and lock it into place with saddle clips.

Top Tip: Make sure you use heavy-duty saddle clips and screws when securing the bar to the plank, otherwise the seesaw might not work properly.

Installing the handles

Installing the handles

Build simple handles at both ends of the seesaw plank, as in the image. Cut the 2×2 lumber at the right size and lock them together with screws, after drilling pilot holes. It is essential to drill pilot holes and to countersink the head of the screws, in order to prevent the wood from splitting.

Round the exposed edges of the handles, by using a router and a 3/4″ bit. Secure the handles to the plank with several screws.

Seesaw plans

Seesaw plans

Last but not least, you should take care of the finishing touches. Therefore, fill the holes with wood putty and let the compound to dry out for several hours. Smooth the surface with medium-grit sandpaper along the wood grain.

Top Tip: Apply several coats of stain or paint to enhance the look of the seesaw and to protect the components from decay. Check out the rest of the projects, if you want to build other projects for your garden.

 

 

This project was about seesaw plans. If you want to see more outdoor plans, we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends, by using the social media widgets.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

6 comments

Crystal Baker -

Approximately how much does this project cost to make?

Reply
Julian -

Probably around 50 $. You can print the cut list and check the total cost at your local DIY store.

Reply
bonnie -

Does the seesaw just set on the tire or do you put the braces into the concrete, it’s not clear how to lock it into the concrete???

Reply
Ovidiu -

You fill the tire with concrete with the braces inside.

Reply
PE Queen -

after you attach to rod to the seesaw plank, how do you attach/secure that to the wooden supports?

Reply
Ovidiu -

You do not. The rod floats on the screws. You should also check out my other design: http://myoutdoorplans.com/playhouse/how-to-build-a-seesaw/

Reply

Leave a Reply to Ovidiu Cancel Reply