Home Playhouse Kids Playset with Slide Plans

Kids Playset with Slide Plans

by Ovidiu

 

This step by step diy woodworking project is about kids playset with slide plans. This is a sturdy playset with a climbing wall, with stairs and with a plastic slide. If you know how to join wood and if you have some basic woodworking tools, make sure you check my plans out. You can make modifications to my plans so it suits your needs. If you enjoy my design, don’t forget to take a look over the rest of my free plans HERE.

There are so many designs and materials to choose from, that we really recommend you to spend some time researching the most suitable plans for your needs. If you still haven’t found what you are looking for, we strongly recommend you to pay attention to these instructions and to check out the related projects, if you want to get more ideas and potential projects for your home and garden. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Kids Playset with Slide Plans

Building-a-kids-playset

Building-a-kids-playset

 

Cut & Shopping Lists

  • A – 2 pieces of 2×6 lumber – 120″ long, 2 pieces – 44 1/4″ long, 4 pieces – 41 1/2″ long, 2 pieces – 21″ long FRAMES
  • B – 17 pieces of 2×6 lumber – 40″ long SLATS
  • C – 9 pieces of 2×2 lumber – 40″ long STAIRS
  • D – 4 pieces of 2×8 lumber – 60″ long SIDE RAILS
  • E – 2 pieces of 2×4 lumber – 40″ long BRACES
  • F – 4 pieces of 2×4 lumber – 33 1/2″ long, 6 pieces – 34 1/4″ long” RAILS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Pocket hole jig, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets my latest plans and for some other exclusive content. Also, follow me on Pinterest and on Instagram to get many ideas for your backyard from all the internet! See how you can Support ME with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a simple elevated planter box

Frame-components

Frame-components

The first step of the playset project is to build the frame components. Use 2×6 lumber for the base and 2×4 lumber for the top. Use a miter saw to make 35 degree cuts to both ends of the beams, as shown in the diagram.

Assembling-the-frames-for-playset

Assembling-the-frames-for-playset

Continue the project by attaching the vertical supports. Use a miter saw to make the angle cuts at both ends of the beams. Drill pocket holes at both ends of the supports, align the edges with attention and then add glue to the joints. Insert 2 1/2″ screws to lock everything together tightly.

Assembling the frame of the playset

Assembling the frame of the playset

Next, you need to assemble the the frame for the playset, by attaching the cross braces, as shown in the free plans. Plumb the side frames with a spirit level and then attach the braces with 2 1/2″ screws. Drill pilot holes at both ends of the

Fitting-the-stairs

Fitting-the-stairs

Fit the 2×2 steps to one side of the playset frame. You can adjust the size between the steps to suit your need. Drill pilot holes at both ends of the steps and then insert 2 1/2″ screws to lock them into place tightly.

Fitting the slats to the ramps

Fitting the slats to the ramps

Fit 2×6 boards to the rest of the frame. You need to make a few cuts so you can fit the pieces into place tightly. Attach some climbing holds so your kids can enjoy this side of the playset, as well.

Fitting the sides to the ramps

Fitting the sides to the ramps

Use 2×8 lumber for the side rails. Use a miter or circular saw to make the angle cuts to both ends of the slats. Smooth the edges with sandpaper and then attach the rails to the frame of the playset. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws to lock them into place tightly. Add glue to the joints and make sure there are no sharp edges.

Building the railings

Building the railings

Use 2×4 lumber for the rails. Cut the components at the right dimensions and then attach them to the playset, as shown in the diagram. Plumb the vertical supports with a spirit level and then drill pilot holes. Insert 2 1/2″ screws to secure the supports into place tightly and then attach the horizontal rails. Drill pilot holes at both ends and then insert 2 1/2″ screws to lock everything together tightly.

Fitting the handrail

Fitting the handrail

Attach the hand rails into place, as shown in the diagram. Drill pilot holes through the top rails and then insert 2 1/2″ screws. As you can see in the plans, you need to leave an opening to one side of the playset, so you can attach a plastic slide.

Wood Children Playset with Slide Plans

Wood Children Playset with Slide Plans

Install the slide to the playset, as shown in the diagram.

Children Playset with Slide Plans

Children Playset with Slide Plans

Last, but not least, you need to take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with sandpaper. Apply a few coats of paint or stain to protect the components from the weather elements and to enhance the look of the project. Install the climbing holds, as well as other accessories.

Children Playset with Slide Plans - Top view

Children Playset with Slide Plans – Top view

This is a simple woodworking project, so any person with basic diy skills can get the job done in a few hours. If you like my project, I recommend you to take a look over the rest of my woodworking plans HERE. See all my playhouse plans HERE. Choose from thousands of free designs and fill your life with DIY joy!

 

 

This woodworking project was about kids playhouse with slide plans. If you want to see more outdoor plans, we recommend you to check out the rest of my step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

Leave a Comment