Home Gazebo Gazebo Roof Plans

Gazebo Roof Plans

by Ovidiu

 

This step by step woodworking project is about gazebo roof plans. After building the frame of the square gazebo, you should make the structure of he roof. There are many techniques and plans you could use to get the job done properly, but in this article we show you the most straight-forward method. First, you need to install a kingpost and secondly, the wooden rafters made out of 2×4 or 2×6 lumber.

Before installing the asphalt shingles, you need to cover the roof’s surface with tar paper. Make sure you cover the hips of the rood with 10” strips of felt, to make the whole structure water proof. In addition, you need to fit the drip edges at the bottom of the roof, under the roofing felt. Use 3/4” plywood to build the roofing sheets and secure them to the rafters with 1 1/2” galvanized screws.

 

 

Projects made from these plans

Add-image

 

 

Cut & Shopping Lists

  • A – 1 pieces of  4×4 lumber – 145 3/4″ long, 1 piece of 4×4 – 4 1/2” long SUPPORT POST
  • B – 4 piece of 2×4 lumber – 132″ long – both ends cut at 25.5º HIP RAFTERS
  • C – 2 piece of 2×4 lumber – 103″ long – both ends cut at 35º COMMON RAFTERS
  • D – 8 pieces of 2×4 lumber – 54 1/2” long, – both ends cut at at 35º JACK RAFTERS
  • E – 600 sq ft of 3/4” tongue and groove plywood ROOFING
  • F – 600 sq ft of roofing felt and asphalt shingles SHINGLES

Tools

 Hammer, Tape measure, Framing square

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Square gazebo roof plans

Square-gazebo-roof-plans

Square-gazebo-roof-plans

 

Building a roof for a square gazebo is a straight forward project, as you need to install the rafters, fit the roofing sheets and install the asphalt shingles. Align all the components at both ends, before driving in the screws.

Top Tip: Use an octagonal kingpost to get the job done as a professional. In addition, you should fit several braces to make the structure rigid. After fitting the roofing, you should remove the braces.

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Gazebo Roof Plans

Fitting-the-rafters

Fitting-the-rafters

The first step of the project is to install the hip rafters. As you can easily notice in the plans, you should place a 4×4 post in the  of the gazebo, as to support the kingposts. Fit two rafters on opposite sides of the kingpost, drill pilot holes trough them and drive in 3 1/2” wood screws into the corner posts.

Top Tip: Fit the other two hip rafters, in the same manner described above.

Installing the kingpost

Installing the kingpost

You can see in the image a close-up with the kingpost, as well as with the hip rafters. As you can easily notice, the kingpost should have an octogonal shape. Use a table or a circular saw to build the king posts out of 4×4 or 6×6 lumber.

Top Tip: Cut the kingpost from a 4 1/2” piece of 4×4 lumber. Plumb the support and secure it into place with several braces. Cut both ends of the hip rafters at 25.5º .

Installing-the-intermediary-rafters

Installing-the-intermediary-rafters

Continue the project by installing the intermediate rafters. Build the rafters from 2×4 lumber, making sure you cut both ends at . Place the rafters properly, as on end has to be over the middle of the top plates, while the other one should be secured to the king post.

Drill pilot holes trough the rafters and secure them into place with 3 1/2” screws. Repeat the process until you install the rest of the components.

Fitting-jack-rafters

Fitting-jack-rafters

Fitting the jack rafters is optional, but they will most certainly increase the rigidity of the roof structure. Fit the components into place and lock them tightly. Align the components at both ends properly, otherwise they won’t support the weight properly.

One end should be secured to the hip rafters, while the other one should be locked to the top plates. Pre-drill the lumber before inserting the screws, to prevent the wood from splitting.

Installing the trims

Installing the trims

Next, you need to attach the 1×6 trims to the ends of the rafters. Cut the wooden components at the right size and attach the to the end of the rafters with 1 1/2” finishing nails.

Installing the roofing sheets

Installing the roofing sheets

Continue the woodworking project by fitting the roofing sheets. In order to get the job done professionally, you should use 3/4” tongue and groove plywood sheets. Fit them over the rafters, starting with the bottom sheets and secure them into place with 1 1/2” nails, every 6”.

Tip Tip: Cover the roof with felt, making sure the strips overlap at least 2”. Secure the trips to the roof with roofing tacks.

Gazebo roof plans

Gazebo roof plans

Last but not least, you have to install the asphalt shingles. Fit the starting course before installing the asphalt shingle tabs. Secure them into place with roofing tacks. Cut the tabs into three components, in order to cover the hips.

Top Tip: Fill the holes with putty and let it dry out for several hours, before sanding the surface with 120-grit sandpaper. Vacuum the residues and apply several coats of protective paint.

 

 

This project was about gazebo roof plans. If you want to see more outdoor plans, we recommend you to check out the rest of the projects.  LIKE us on Facebook to be the first that gets our latest updates and submit pictures with your DIY projects.

 

Previous Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Lal -

This is 12 ft square gazebo roof, How to calculate measurement for bigger gazebo?

Reply
Julian -

I recommend you to use a 3d design application, such as Sketchup. In this manner you can draw the roof to your specifications and adjust the slope and the size to your needs.

Reply

Leave a Reply to Julian Cancel Reply