Home 8x14 2 Post Pergola Plans

2 Post Pergola Plans

by Ovidiu

 

This step by step diy project is about 2 post pergola plans. If you are tight on space in your backyard or you want to cover your bbq area, you should consider building a nice two legged pergola using my free set of plans. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

It’s that simple to build your DIY 2 post pergola!

 

 

2 Post Pergola Plans

Building-a-two-post-pergola

Building-a-two-post-pergola

 

Cut & Shopping Lists

  • A – 2 pieces of 6×6 lumber – 120″ long POSTS
  • B – 2 piece of 6×6 lumber – 96″ long TOP SUPPORTS
  • C – 2 pieces of 2×6 lumber – 168″ long BEAMS
  • D – 2 pieces of 6×6 lumber – 45″ long BRACES
  • E – 8 pieces of 2×6 lumber – 168″ long RAFTERS
  • F – 7 piece of 1×2 lumber – 96″ long SLATS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

2 legged pergola plans

Laying-out-the-posts

Laying-out-the-posts

The first step of the project is to lay out the posts for the pergola. Adjust the size of the posts to suit you needs and tastes.

Fitting the posts

Fitting the posts

You can fit the posts directly in concrete or you can pour footings and set the posts in anchors. Dig 2-3′ holes into the ground and then install the tube forms.

Anchoring the post into concrete

Anchoring the post into concrete

Your local building codes should specify a recommended depth for post holes in your area. For a structure like this one, plan on about two-feet in depth, as depth of your hole should be about 1/4 of the height of the wooden post. The holes should have about 10″ in diameter.

Building-the-top-supports

Building-the-top-supports

Continue the project by making the support for the shade elements. Cut the 6×6 beam at 96″ and them make a notch, as shown in the diagram. Mark the cut area and then make 1 1/2″ deep parallel cuts using a circular saw. Remove the excess with a chisel and clean the recess with sandpaper.

Cutting the decorative ends

Cutting the decorative ends

Continue the project by making decorative cuts to both ends of the support beams. Mark the cut lines and get the job done with a jigsaw. Smooth the edges with sandpaper for a neat result.

Fitting the top supports

Fitting the top supports

Fit the supports to the top of the posts and align the edges with attention. Make sure the corners are square and leave no gaps between the components. Drill pilot holes through the top supports and insert 8″ screws into the posts.

Fitting-the-braces

Fitting-the-braces

Continue the project by installing the 6×6 braces to the frame of the pergola. Cut both ends of the braces and then secure it to the posts with 3 1/2″ screws, after drilling the pilot holes.

Building the support beams

Building the support beams

Build the support beams for the pergola from 2×6 beams. Cut both ends of the 14′ long beams in a decorative manner, using the pattern shown above.

Fitting the support beams

Fitting the support beams

Fit the support beams to the 2 legged pergola, as shown in the plans. Center the beams to the top of the posts and clamp them into place tightly. Drill pilot holes through the beams and through the posts and insert 9″ carriage bolts. Insert at least two carriage bolts for each post. Use a spirit level to make sure the posts are plumb when drilling the pilot holes.

Building-the-shade-elements

Building-the-shade-elements

Build the shade elements from 2×6 lumber. As you can easily notice in the plans, you need to make two notches to the beams so they fit easily over the 6×6 supports. Mark the cut lines to the beams, as shown in the diagram and then use a saw to make the notches. Smooth the recess with sandpaper.

Fitting the top rafters

Fitting the top rafters

Fit the shade elements to the supports, making sure you place them equally spaced. You can toenail them to the supports or you can use metal fasteners.

Fitting the top slats

Fitting the top slats

Fit 1×2 slats to the top of the shade elements. Align the slats to the rafters as shown in the plans. Use 1 1/4″ screws or nails to secure the slats into place tightly.

2 legged pergola aplans

2 legged pergola plans

Fill the holes with wood putty and let it dry out for a few hours. Smooth the surface with 120-220 grit sandpaper then enhance the wood with a few coats of stain or lacquer. Make sure you choose a waterproof product, as the lumber will be exposed to the elements.

2 Post Pergola Plans

2 Post Pergola Plans

Seen from above, the pergola has a really nice design and it will integrate easily to any backyard. You can adjust the size and the design of the pergola so it suits your needs.

Two Legged Pergola Plans

Two Legged Pergola Plans

This is a simple project you should be able to build in a few days without much effort. Remember that you need to adjust the size of the components so they suit your own needs and read the local building codes before undertaking the project on your own. If you want to score more point, you can even invest in more exquisite materials, such as oak or redwood. Premium Plans for this project available in the Shop.

If you want to get this project as a PDF file, with 1 full cut list and 1 full shopping list, check out the GET PDF PLANS button bellow.

 

 

This woodworking project was about two legged pergola plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

38 comments

Joe -

Just double checking/ any concern using 6x6s for support beams? With the weight of the 6×6 – 8ft (tipping or leaning forward?) thanks

Reply
Julian -

If you set the posts in concrete, you should have no problems with using 6×6 lumber for the support beams, especially that you will also fit braces. However, feel free to use other materials, if you wish.

Reply
Joe -

We finished up the pergola using your plans with just a few tweaks last weekend. It turned out great. If you’d like to see a picture, just let me know your email address and I can forward it that way. Thanks again.

Reply
Julian -

I’ve receive the picture. It looks awesome! Great job! Can you please tell me how much were the materials and how long it took to get the job done?

Reply
Will -

noticed that the plans are missing

Building the shade elements

Build the shade elements from 2×6 lumber. As you can easily notice in the plans, you need to make two notches to the beams so they fit easily over the 6×6 supports. Mark the????

thanks

Reply
Laura Fordahl -

I love this, just what I wanted! In the materiel list it says 8″ carriage bolts, in the step by step it says 9″” can you send this plan to my e mail? Thanks

Reply
Ovidiu -

It’s 9″ carriage bolts. See how you can save or print the plans HERE: http://myoutdoorplans.com/faq/

Reply
Gary -

Interesting/neat design. I had some questions as I would like to tweak it a bit. I am using this over a Koi pond that runs along side 6ft stockade fence. I will secure the posts next to existing fence posts and may extend it to 20′ vs 14′ in your plans. This said will add a 3rd post / 10ft on center. I would like a little more overhang on the pond and really do not need the 24″ overhang on backside. Can I reduce the 24″? and also extend it two more feet or more over pond side and still have the necessary support? Also will this change the position of the 6×6- 45 degree braces? And if so how do you determine the position? Thanks Gary

Reply
Ovidiu -

You can remove the 24″ overhang. If you make the front overhang longer, this will not change the position of the braces. I would make them longer though, so they can support the longer overhang, and thus their position would change.

Reply
Rob -

I’d like to reduce the size of the 6×6 support beam from 96” to 72”. 24” in the back and only 48” in the front. What size should I reduce the angled 6×6 support to ? Plans say it should be 45” for the 96” support beam, therefore curious to know what length I should adjust to for the 72” support beam…

Reply
Ovidiu -

36″

Reply
Laurie -

Wondering if these plans may be adapted on a smaller scale using 4×4 posts?

Reply
Ovidiu -

Yes, it will work.

Reply
Bob -

I would like to have the 6×6 support beams have a slight rise(10-15 degrees) off the posts rather than the 90 degrees in plans. If possible, how would that change the cuts?

Reply
Brandon -

I am curious about this also. I want to angle the end opposite the posts so rain water runs onto the roof and into the gutters.

Reply
Ovidiu -

It is possible, it does change the angle of the braces and also the cut outs inside the horizontal supports that go on top of the posts.

Reply
Dan R -

Looking at building this over my outdoor kitchen. Kitchen is already done my only concern would be mounting 6×6’s to the slab. The slab is 4in thick. Do you have any suggestions?

Reply
bethany -

did you ever figure this out?

Reply
Robin -

I am looking to possibly build a 8 x 8 or 10 wide and 8 depth two post gazebo. Do you provide plans for these? Also, how do you feel about putting a metal roof on it instead of wood planks? I would appreciate your feed back. Thanks

Reply
Ovidiu -

I don’t have plans for that. To use metal sheets instead of the rafters, you would need a slope. The sheets should go with the slope of the roof, from front to back.

Reply
Robin -

Also, what if I wanted to put a slight slop on the roof. Plus, would the metal roof need to go from side to side or front to back? Thank you

Reply
Angy Perrus -

I have an odd-ball arrangement that has stymied my attempts at finalizing a Pergola plan,…….until now.
I’m printing the Plan as I’m writing this. I will modify the Plan to morph it into a modified “L” design. Hope to have it built by mid-to-late summer.
Will send photos then.
Many thanks for the Plan!

Reply
Ovidiu -

Good luck. I’m looking forward to seeing your project!

Reply
J -

I have been looking at simpson strong tie ABA 6 in. x 6 in. ZMAX Galvanized Adjustable Post Base to attach the post to the concrete. Im a little skeptical in using something like this for a cantilever pergola and perhaps it would be better to just bury the post 2′ to 3′, does anyone have any sound advice on the matter.

Reply
Michael -

For the 2 post pergola with 6×6 post, can the 6×6 post be mounted to concrete?

Reply
Jamie -

This is super helpful, thanks! Is it possible to do a 2-legged design that covers a 12’x12′ space instead of the 8’x12′? Would there be enough structural support to add an additional 4′?

Reply
Ovidiu -

I don’t see that possible.

Reply
Andrew -

Is it posible to build a scaled down version with 4×4 posts and 2x4s instead of 6×6 and 2x6s? I already have the materials and would love to put them to use on something like this. Maybe a 4 foot overhang rather than 6?

Reply
Ovidiu -

Yes, you could do that.

Reply
Kathleen Blount -

Would it be possible to build this to cover an 8×8 area? I need the two post design, but don’t have the 12 foot base area.

Reply
Ovidiu -

Yes, it is possible. Just make it shorter. The techniques are the same, you only need to modify the component size.

Reply
argie flores -

Has there been any sag with the 2x6x14 beams or any concerns with sag with those beams over time?

Reply
Eric Knudsen -

I’m looking for a DIY 3 Post L Shaped Pergola design approximately 12′ by 18′. does anyone have any ideas?

Reply
Dave -

can these plans be modified to 18ft between the 2 posts? What size would the beam that spans the 2 posts need to be?

Reply
Chris -

Great plans, thank you. If I cut the overhang from 2ft to 1ft and make the long side 7ft instead of 6ft, would the knee braces at 45″ in the plan be sufficient? If not, what length would you recommend?

Reply
David Rydzinski -

Made the 2 post pergola. Love it! Pretty easy to do and looks great. I have pictures but don’t see where to upload.

Reply
Ovidiu -

I received your brag project. I will publish it shortly. Thank you for sharing!

Reply
JC -

Would this be strong enough to support about 1000 pounds? Could I mount a swing and that would hold 2 people ? Thank you

Reply

Leave a Reply to Joe Cancel Reply