Home Chair Step Stool Plans

Step Stool Plans

by Ovidiu

 

This step by step diy woodworking project is about step stool plans. If you want to learn how to build a simple stool, we recommend you to pay attention to the instructions and diagrams featured on this article. In addition, there are many similar projects that you could build in your backyard, so make sure you take a close look over the rest of our woodworking plans.

There are many aspects that you should take into account before starting the construction of your very own step stool. First of all, we recommend you to invest in high quality lumber, such as pine, cedar or redwood. Always take accurate measurements before building the components and align the parts with attention. Pre-drill pilot holes before inserting the screws, to prevent the wood from splitting. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

Cut & Shopping Lists

  • A – 2 pieces of 1×12 lumber – 15 1/2″ long LEGS
  • B – 4 pieces of 1×2 lumber – 12″ long SUPPORTS
  • C – 2 pieces of 1×6 – 15″ long STEPS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Post hole digger, Concrete mixer

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Step Stool Plans

Building a step stool

Building a step stool

 

Top Tip: There are many designs and plans you could choose from when building the step stool, so make sure you select from several options.

 

 

Building a step stool

Building the sides of the stool

Building the sides of the stool

The first step of the woodworking project is to build the sides of the step stool. As you can easily notice in the plans, we recommend you to cut the components out of 1×15 lumber.

Top Tip: Mark the cut lines on the wooden pieces with a pencil and get the job done with a circular saw. It is essential to take accurate measurements and to smooth the cut edges with 120-grit sandpaper.

Fitting the supports

Fitting the supports

The next step of the project is to fit the 1×2 supports between the sides of the step stool. Cut the components at the right size, drill pocket holes at both ends of the supports and insert 1 1/4″ screws into the sides.

Top Tip: Add waterproof glue to the joints, in order to enhance the bond of the components. Make sure the corners are right-angled and the supports are perfectly horizontal.

Attaching the steps

Attaching the steps

Continue the woodworking project by cutting the 1×8 wooden slats at the right size and by locking them to the frame with screws. Drill pocket holes through the supports and insert the 1 1/4″ galvanized screws into the slats.

Wood table plans

Wood table plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: In order to protect the lumber from water damage, we recommend you to cover the components with several coats of paint. Place the small table in a proper location and move it whenever necessary.

 

 

This woodworking project was about small table plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

1 comment

ART -

Thank you so very much for sharing your expertise and tips, projects etc. Very helpful and very much appreciated.

Art Borquez

PS. I shall be tempting one of the children’s foot stool as a gift for my granddaughter, age one year 6 months.

Thanks

Reply

Leave a Reply to ART Cancel Reply