Home Furniture Octagonal Picnic Table Plans Free

Octagonal Picnic Table Plans Free

by Ovidiu

 

This step by step diy project is about octagonal picnic table plans plans. I have designed this octagon picnic table with an easy access to the seats so you can finally create that unique place for hanging out with the friends and family in your yard. This project can be completed in one weekend with common tools and materials you can find at any DIY store.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Octagonal Picnic Table Plans Free

Building-an-octagonal-picnic-table

Building-an-octagonal-picnic-table

 

Cut & Shopping Lists

  • A – 1 piece of 2×4 lumber – 62″ long, 2 pieces – 30 1/4″ long, 4 pieces – 30″ long SUPPORTS
  • B – 8 piece of 2×4 lumber – 26 1/8″ long, 8 piece of 2×4 lumber – 22 3/4″ long, 8 piece of 2×4 lumber – 19 1/2″ long, 8 piece of 2×4 lumber – 16 1/8″ long, 8 piece of 2×4 lumber – 12 7/8″ long, 8 piece of 2×4 lumber – 9 1/2″ long, 8 piece of 2×4 lumber – 6 1/4″ long (22.5 degree cuts at both ends), 1 piece – 7″x7″ long TABLETOP
  • C – 4 pieces of 2×4 lumber – 35″ long LEGS
  • D – 2 pieces of 2×4 lumber – 95″ long, 2 pieces – 46 3/4″ long, 2 pieces – 43 3/4″ long SUPPORTS
  • E – 8 pieces of 2×4 lumber – 24″ long, 8 pieces – 22 1/4″ long, 16 pieces of 1×2 lumber – 7 1/2″ long SEAT
  • F – 8 pieces of 2×6 lumber – 17″ long BRACES
  • G – 4 pieces of 2×8 lumber – 23 1/2″ long BASE

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build an octagon picnic table

Tabletop-supports

Tabletop-supports

The first step of the project is to build the frame for the tabletop. Mark the cut lines on the 2×4 beams and then get the job done with a saw. Make 45 degree cuts to the beams, as shown in the diagram. Smooth the edges with 120-220 grit sandpaper.

Detail

Detail

Make double 45 degree cuts to the orange supports, as shown in the plans. Use a miter saw to make the angle cuts accurately. Mark the center of the board, so you can make the angle cuts accurately.

Assembling the tabletop

Assembling the tabletop

Fit the supports on a level surface and lock them together as shown in the diagram. First, drill pocket holes at both ends of the blue supports and then secure them to the center of the yellow beam using 2 1/2″ screws. Next, fit the orange supports, drill pilot holes and insert 2 1/2″ screws to lock them into place tightly.

Remember that this frame will be even more sturdy when you’ll assemble the picnic table, because every component will add strength.

Tabletop-slats

Tabletop-slats

Next step of the project is to cut the slats for the tabletop. Make 22.5 degree cuts to both ends of the 2×4 slats, following the pattern in the diagram. Drill pocket holes at both ends of the slats, so you can interlock them together tightly. Add glue to the joints and align the edges flush. Fit a piece of 1/2″ plywood between the slats, to create even gaps.

Middle slat

Middle slat

Build the central slat for the tabletop from 2×8 lumber or from 2 2x6s. Make the cuts to the slat using the information from the diagram. Smooth the edges with sandpaper.

Assembling the tabletop slats

Assembling the tabletop slats

After assembling the tabletop with 2 1/2″ screws, you need to center the supports into place, as shown in the diagram. Next, drill pilot holes through the sides of the supports and insert 2 1/2″ screws into the tabletop slats.

Building-the-legs-for-the-table

Building-the-legs-for-the-table

Build the legs for the octagonal picnic table from 2×4 lumber, by making 30 degrees cuts to both ends. Smooth the edges with sandpaper.

Fitting the legs

Fitting the legs

Attach the legs to the frame of the tabletop, 4″ away from the end of the supports. Clamp the legs to the supports, drill pilot holes through both the legs and the supports and insert 3 1/2″ carriage bolts. Insert 2 bolts for each joint.

Building the seat supports

Building the seat supports

The next step of the octagon picnic table is to build the frame for the seats. Cut the 2×4 beams as shown in the diagram and make 45 degree cuts to the ends. Drill pocket holes to the straight end of the blue and violet  components and secure them to the yellow beams with 2 1/2″ screws. Align the edges flush and make sure the corners are square. Fit a scrap piece of 2×4 between the double boards, to create the 1 1/2″ gaps.

Fitting the seat supports

Fitting the seat supports

Fit the seat supports to the picnic table, as shown in the diagram. Clamp the supports to the legs, drill pilot holes through both the beams and the legs and insert 5″ carriage bolts. Insert 2 bolts for each joint for a professional result. Use a spirit level to make sure the supports are horizontal.

Building the base

Building the base

Next, you need to build the seats for the picnic table. Start with the 2×8 base by making decorative cuts to the two corners.

Seat slats

Seat slats

Use 2×4 lumber for the seat slats. Make 22.5 degree cuts to one end of the slats and then lay them on a level surface. Fit pieces of 1/2″ between the slats, as shown in the plans.

Assembling the seat slats

Assembling the seat slats

Secure the slats together tightly with 1×2 supports and 1 5/8″ screws. Drill pilot holes before inserting the screws to prevent the wood from splitting.

Diagonal supports

Diagonal supports

Use 2×6 lumber for the diagonal braces for the seats. Use a miter saw to make 19 degree bevel cuts to the braces. Drill pocket holes at both ends.

Assembling the seats

Assembling the seats

The next step is to assemble the seats by locking all these components together. Use 2 1/2″ screws to secure the braces to the bottom slat and to the seat slats.

Detail

Detail

Notice how you should fit the braces into place.

Seats

Seats

Smooth the edges or use a router to round-over the exposed edges.

Fitting the seats

Fitting the seats

Fit the seats to the picnic table, as show in the diagram. Center the base of the seats to the legs. Drill pilot holes through the legs and insert 2 1/2″ screws into the base of the slats. Afterwards, drill pilot holes through the seat slats and insert 2 1/2″ screws into the supports.

Octagonal picnic table plans - Top view

Octagonal picnic table plans – Top view

Last but not least, you need to take care of the finishing touches. Fill the holes with wood putty and let them harden for a few hours. Smooth the surface with 120-220 grit sandpaper and round the exposed edges with a router. Apply a few coats of paint or stain to protect the lumber from the elements and to enhance the look of the octagon picnic table.

Octagonal picnic table plans free

Octagonal picnic table plans free

Don’t forget to take a look over the rest of my picnic table plans HERE. If you don’t fancy this particular design, you can choose from lots of other outdoor furniture plans I have on the site. Remember to adjust the size and the design of the projects to your needs and to have fun during the process!

If you want to get this project as a PREMIUM PLAN (design differs from this version) with a full Cut & Shopping list, please take a look over the GET PDF PLANS button bellow.

 

 

This woodworking project was about octagonal picnic table plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

20 comments

Ritchie -

Fantastic plan Thanks Ritchie

Reply
Jack -

Thanks for the nice words. Let me know how it comes out!

Reply
brian -

fantastic. Can’t get over how good they are

Reply
Allen -

thank you for the free plans, is there a way to download them?

Thank you

Reply
Ovidiu -

Yes. Please read the FAQs: http://myoutdoorplans.com/faq/

Reply
Liam Holst -

How many of each length carriage bolts do I need

Reply
David Reaves -

Do you have a premium plan for this Octagonal Picnic Table? I really like the design! The more detailed, step by step instructions would be fantastic.

Reply
Ovidiu -

No, not yet.

Reply
Dan Howell -

Does this one seat 8 people?

Reply
Ovidiu -

Yes, that’s the idea.

Reply
Brent Young -

hi, I can’t seem to find the step where you bolt the slats to the support

Reply
Ovidiu -

What slats and what supports? Be more specific please

Reply
George Lizer -

hi I’m having an issue with step one because of the awkward cut to the 4 orange supports. I can’t get it bolted tight into the yellow beam.

Reply
Korea miller -

hi im having issues bolting the orange support thats cut at 45 on both sides and the one side comes to a point. Makes it hard to get it bolted tight

Reply
Ovidiu -

Building an octagonal table comes with its tricks. That’s the design so you create a sturdy frame. Don’t find the 45 degree cuts to the orange that tricky. And assembling everything together shouldn’t be that hard, if you align everything and you could use a few slats to lock everything together temporarily, until you drill the pilot holes and insert the screws.

Reply
Jules Graeber -

how can i print these plans?

Reply
Ovidiu -

At the time being, the plans are online only.

Reply
Thomas Junaitis -

Can you build this octagon table with treated 2×4. With same measurements?

Reply
Zach Gist -

Hi, I am a soon to be eagle scout that will be building this table for a project, but I had a question about the diameter of the 3 1/2 carriage bolts. The link that was originally on the materials list has expired, and I was unsure of the diameter of the bolts

Reply
Ovidiu -

1/2″

Reply

Leave a Reply to Jack Cancel Reply